3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS7A3301RGWT
Texas Instruments · Linear Voltage Regulators (LDO) · VQFN-20-EP(5x5)
TPS7A3301RGWT from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulator output that requires at least 10 µF to ground for stability, with 47-µF ceramic recommended from OUT to GND close to the device. |
| 2 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 3 | FB | input | Feedback input to the control-loop error amplifier that sets the output voltage; TI recommends a 10-nF capacitor from FB to OUT placed close to the device. |
| 4 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 5 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 6 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 7 | GND | power_in | Ground reference; the thermal pad is internally connected to GND and should be connected to a large-area ground plane. |
| 8 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 9 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 10 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 11 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 12 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 13 | EN | input | Enable pin that turns the regulator on or off, with |
| 14 | NR/SS | passive | Noise reduction and soft-start pin; a capacitor from NR/SS to GND reduces RMS noise, with 1 µF recommended close to the device. |
| 15 | IN | power_in | Input supply that requires at least 10 nF to ground for stability; a 10-µF capacitor from IN to GND is recommended, and the IN pin to GND absolute maximum is -36 V to 0.3 V. |
| 16 | IN | power_in | Input supply that requires at least 10 nF to ground for stability; a 10-µF capacitor from IN to GND is recommended, and the IN pin to GND absolute maximum is -36 V to 0.3 V. |
| 17 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 18 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 19 | NC | unconnected | Not internally connected; this pin can be left open or tied to any voltage between GND and IN. |
| 20 | OUT | power_out | Regulator output that requires at least 10 µF to ground for stability, with 47-µF ceramic recommended from OUT to GND close to the device. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VIN | -35 | -3 | V | 5 | ||
| Enable supply voltage | VEN | 10 | V | 5 | |||
| Output voltage | VOUT | -33.2 | V | 5 | |||
| Output current | IOUT | 0 | 1 | A | 5 | ||
| Input capacitor | CIN | 10 | 47 | µF | 5 | ||
| Output capacitor | COUT | 10 | 47 | µF | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| IN pin to GND pin voltage | -36 | 0.3 | V | 5 | |||
| OUT pin to GND pin voltage | -33 | 0.3 | V | 5 | |||
| OUT pin to IN pin voltage | -0.3 | 36 | V | 5 | |||
| FB pin to GND pin voltage | -2 | 0.3 | V | 5 | |||
| FB pin to IN pin voltage | -0.3 | 36 | V | 5 | |||
| EN pin to GND pin voltage | -36 | 10 | V | 5 | |||
| NR/SS pin to IN pin voltage | -0.3 | 36 | V | 5 | |||
| NR/SS pin to GND pin voltage | -2 | 0.3 | V | 5 | |||
| Operating virtual junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Internal reference | VREF | -1.192 | -1.175 | -1.157 | V | TJ = 25°C, VFB = VREF | 6 |
| Output voltage range | VOUT | -33.2 | V | /VIN/ ≥ /VOUT(nom)/ + 1 V | 6 | ||
| Nominal accuracy | VOUT | -1.5 | 1.5 | %VOUT | TJ = 25°C, /VIN/ = /VOUT(nom)/ + 0.5 V | 6 | |
| Accuracy | VOUT | -1 | 1 | %VOUT | 5 V ≤ /VIN/ ≤ 35 V, 1 mA ≤ IOUT ≤ 1 A | 6 | |
| Overall accuracy | VOUT | -2.5 | 2.5 | %VOUT | /VOUT(nom)/ + 1 V ≤ /VIN/ ≤ 35 V, 1 mA ≤ IOUT ≤ 1 A | 6 | |
| Line regulation | ΔVOUT(ΔVI) | 0.14 | %VOUT | /VOUT(nom)/ + 1 V ≤ /VIN/ ≤ 35 V | 6 | ||
| Load regulation | ΔVOUT(ΔIL) | 0.4 | %VOUT | 1 mA ≤ IOUT ≤ 1 A | 6 | ||
| Dropout voltage | /VDO/ | 325 | 800 | mV | VIN = 95% VOUT(nom), IOUT = 1 A | 6 | |
| Dropout voltage | /VDO/ | 290 | mV | VIN = 95% VOUT(nom), IOUT = 500 mA | 6 | ||
| Ground current | IGND | 210 | 350 | µA | IOUT = 0 mA | 6 | |
| Shutdown supply current | /ISHDN/ | 1 | 3 | µA | VEN = +0.4 V | 6 | |
| Feedback current | IFB | 14 | 100 | nA | 6 | ||
| Enable current | /IEN/ | 0.48 | 1 | µA | VEN = /VIN/ = /VOUT(nom)/ + 1 V | 6 | |
| Enable current | /IEN/ | 0.51 | 1 | µA | VIN = VEN = -35 V | 6 | |
| Enable current | /IEN/ | 0.5 | 1 | µA | VIN = -35 V, VEN = +10 V | 6 | |
| Positive enable high-level voltage | VEN(+HI) | 2 | 10 | V | 6 | ||
| Positive enable low-level voltage | VEN(+LO) | 0 | 0.4 | V | 6 | ||
| Negative enable high-level voltage | VEN(-HI) | -2 | V | relative to VIN | 6 | ||
| Negative enable low-level voltage | VEN(-LO) | -0.4 | 0 | V | 6 | ||
| Undervoltage lockout threshold | VUVLO | -2 | V | 6 | |||
| Ground current | IGND | 5 | mA | IOUT = 500 mA | 6 | ||
| Current limit | ICL | 1900 | mA | VOUT = 90% VOUT(nom) | 6 | ||
| Output noise voltage | Vn | 16 | µVRMS | VIN = -3 V, VOUT(nom) = VREF, COUT = 22 µF, CNR/SS = 10 nF, BW = 10 Hz to 100 kHz | 6 | ||
| Power-supply rejection ratio | PSRR | 72 | dB | VIN = -6.2 V, VOUT(nom) = -5 V, COUT = 22 µF, CNR/SS = 10 nF, CFF = 10 nF, f = 10 kHz | 6 | ||
| Thermal shutdown temperature | Tsd | 170 | °C | Shutdown, temperature increasing | 6 | ||
| Thermal shutdown reset temperature | Tsd | 150 | °C | Reset, temperature decreasing | 6 | ||
| Lower feedback resistor | R2 | 240 | kΩ | Lower feedback resistor, load current ≥ 5 µA for stability at no load | 5 | ||
| Noise reduction capacitor | CNR | 1 | µF | 5 | |||
| Feed-forward capacitor | CFF | 10 | nF | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 33.7 | °C/W | RGW (VQFN), 20 pins | 5 | ||
| Junction-to-case(top) thermal resistance | RθJC(top) | 30.4 | °C/W | RGW (VQFN), 20 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 12.5 | °C/W | RGW (VQFN), 20 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 0.4 | °C/W | RGW (VQFN), 20 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 12.5 | °C/W | RGW (VQFN), 20 pins | 5 | ||
| Junction-to-case(bottom) thermal resistance | RθJC(bot) | 2.4 | °C/W | RGW (VQFN), 20 pins | 5 |
CAD (KiCad official)
- Symbol:
TPS7A3301RGWT - Footprint:
Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm - 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
tps7a3301rgwt-etched.step/tps7a3301rgwt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a3301rgwt.step/tps7a3301rgwt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
1b607b7bf1350a0f, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).