main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps7a2650drvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps7a2650drvr: viewers · Ray
package.json tps7a2650drvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps7a2650drvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps7a2650drvr · Ray
tps7a2650drvr-etched.fit.json tps7a2650drvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a2650drvr-etched.glb tps7a2650drvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a2650drvr-etched.step tps7a2650drvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a2650drvr.glb Publish 0.1.0 · Ray
tps7a2650drvr.kicad_mod Publish 0.1.0 · Ray
tps7a2650drvr.kicad_sym Publish 0.1.0 · Ray
tps7a2650drvr.lbr Publish 0.1.0 · Ray
tps7a2650drvr.step Publish 0.1.0 · Ray

TPS7A2650DRVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6(2x2)

TPS7A2650DRVR from Texas Instruments, in a WSON-6(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Output pin; capacitor required from OUT to ground for stability; place output capacitor as close to OUT and GND pins as possible.
2 NC unconnected No internal connection for fixed-voltage version; pin can be floated but device has better thermal performance when tied to GND.
3 PG tri_state Power-good open-collector output; goes high when VOUT > VIT(PG,RISING) and low when VOUT < VIT(PG,FALLING); requires external pullup resistor.
4 EN input Enable input pin; drive greater than VEN(HI) to enable the regulator or less than VEN(LOW) to disable; do not float this pin.
5 GND power_in Ground pin.
6 IN power_in Input supply pin; for best transient response use recommended capacitor from IN to ground; minimize source impedance.
7 PAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6(2x2)
Category Power Management (PMIC)
Pins 7

CAD (KiCad official)

  • Symbol: TPS7A2650DRVR
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps7a2650drvr-etched.step / tps7a2650drvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a2650drvr.step / tps7a2650drvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 b0f9a43bfbd31811, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF