component
TPS7A2618DRVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TPS7A2618DRVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)
TPS7A2618DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output pin; requires capacitor to GND for stability; 0 to 500 mA maximum output current per Recommended Operating Conditions. |
| 2 | NC | unconnected | No internal connection for fixed-voltage version devices; pin can be floated but device has better thermal performance with this pin tied to GND. |
| 3 | PG | tri_state | Power-good open-collector output pin; pullup externally to OUT pin or another voltage rail; transitions based on VOUT thresholds VIT(PG,RISING) and VIT(PG,FALLING). |
| 4 | EN | input | Enable input pin; drive above VEN(HI) to enable regulator or below VEN(LOW) for low-current shutdown; do not float; if not used connect EN to IN. |
| 5 | GND | power_in | Ground reference pin. |
| 6 | IN | power_in | Input pin for 2.4V to 18V supply voltage; use recommended input capacitor value from IN to ground as specified in Recommended Operating Conditions; place input capacitor close to IN and GND pins. |
| 7 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
CAD (KiCad official)
- Symbol:
TPS7A2618DRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps7a2618drvr-etched.step/tps7a2618drvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a2618drvr.step/tps7a2618drvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
b0f9a43bfbd31811, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS7A2618DRVR
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)
TPS7A2618DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output pin; requires capacitor to GND for stability; 0 to 500 mA maximum output current per Recommended Operating Conditions. |
| 2 | NC | unconnected | No internal connection for fixed-voltage version devices; pin can be floated but device has better thermal performance with this pin tied to GND. |
| 3 | PG | tri_state | Power-good open-collector output pin; pullup externally to OUT pin or another voltage rail; transitions based on VOUT thresholds VIT(PG,RISING) and VIT(PG,FALLING). |
| 4 | EN | input | Enable input pin; drive above VEN(HI) to enable regulator or below VEN(LOW) for low-current shutdown; do not float; if not used connect EN to IN. |
| 5 | GND | power_in | Ground reference pin. |
| 6 | IN | power_in | Input pin for 2.4V to 18V supply voltage; use recommended input capacitor value from IN to ground as specified in Recommended Operating Conditions; place input capacitor close to IN and GND pins. |
| 7 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
## CAD (KiCad official)
- Symbol: `TPS7A2618DRVR`
- Footprint: `Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm`
- 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `tps7a2618drvr-etched.step` / `tps7a2618drvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7a2618drvr.step` / `tps7a2618drvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps7a26) (33 pp, sha256 `b0f9a43bfbd31811`, retrieved 2026-10-01, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps7a2618drvr-datasheet.pdf)