TPS7A25125DRVR

{
  "slug": "tps7a25125drvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps7a25125drvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7a25125drvr.kicad_sym",
    "tps7a25125drvr.kicad_mod",
    "tps7a25125drvr.glb",
    "tps7a25125drvr.step",
    "tps7a25125drvr.lbr",
    "docs/hero.png",
    "docs/tps7a25125drvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps7a25125drvr-hero.glb",
    "tps7a25125drvr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS7A25125DRVR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6-EP(2x2)",
    "pin_count": 7,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps7a25",
    "parts": {
      "symbol": "tps7a25125drvr.kicad_sym",
      "footprint": "tps7a25125drvr.kicad_mod",
      "model_3d": "tps7a25125drvr-hero.glb",
      "model_3d_plain": "tps7a25125drvr.glb",
      "model_3d_step": "tps7a25125drvr-etched.step",
      "model_3d_step_plain": "tps7a25125drvr.step",
      "lbr": "tps7a25125drvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2862530",
      "digikey": "296-TPS7A25125DRVRTR-ND",
      "mouser": "595-TPS7A25125DRVR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T16:28:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS7A25125DRVRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS7A25125DRVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output pin that requires a capacitor from OUT to ground for stability, placed as close to OUT and GND as possible, using the value in the Recommended Operating Conditions table."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection on the fixed-voltage version; the pin can be left floating, but tying it to GND gives better thermal performance."
      },
      {
        "number": "3",
        "name": "PG",
        "type": "output",
        "description": "Open-collector power-good output that must be pulled up externally to OUT or another rail; it goes high when VOUT exceeds VIT(PG,RISING) and is driven low when VOUT falls below VIT(PG,FALLING)."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input that must be driven above VEN(HI) to turn the regulator on and below VEN(LOW) to place it in low-current shutdown; it must not be left floating and should be connected to IN if unused."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the regulator, which should be connected to a large-area ground plane for best thermal performance."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin that should have the recommended or larger capacitor from IN to GND placed as close to the pins as possible for best transient response and low input impedance."
      },
      {
        "number": "7",
        "name": "Thermal pad",
        "type": "passive",
        "description": "Exposed thermal pad that may be connected to ground or left floating, and should be tied to a large-area ground plane for best thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN TPS7A25125DRVR uses the fixed-voltage version of the TPS7A25 (nomenclature '125' = 1.25 V; '; The datasheet prints the thermal pad as 'Pad' in the pin table and does not give it a pin number the; The capacitor values referenced for IN and OUT are in the Recommended Operating Conditions table, wh"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0605,
        "at": "2026-10-08T16:28:31"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps7a25",
        "pages": 37,
        "sha256": "621835e83153f84e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7a25125drvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7a25125drvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "75b2a402076fd672d1eb81a39d958b9312e44ac15b602d659af988be73078e56",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}