main
Ray
tps7a2450dbvr: one-pass backfill (citation: different_file, hero prebuilt (inputs unchanged))
0cad52d
TPS7A2450DBVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS7A2450DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin accepting 2.4 V to 18 V; requires minimum 1 μF input capacitor placed close to the device for transient response. |
| 2 | GND | power_in | Ground reference pin. |
| 3 | EN | input | Enable input pin; logic high (≥0.9 V) enables the regulator and logic low (≤0.4 V) disables to shutdown mode. |
| 4 | NC | unconnected | No internal connection on fixed-version device; pin can float but provides better thermal performance when tied to GND. |
| 5 | OUT | power_out | Regulated 5.0 V output pin with ±1.25% accuracy over temperature; delivers up to 200 mA with 1 μF to 100 μF output capacitor required for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (fixed output versions, TJ = -40 to 125 °C) | VOUT | -1.25 | 1.25 | % | Fixed output versions, TJ = -40℃ to 125℃ | 6 | |
| Output voltage accuracy (fixed output versions, TJ = 25 °C) | VOUT | -0.5 | 0.5 | % | Fixed output versions, TJ = 25℃ | 6 | |
| Line regulation | ΔVOUT(ΔVIN) | -0.25 | 0.25 | % | (VOUT(nom) + 0.5 V or 2.4 V) ≤ VIN ≤ 18 V | 6 | |
| Load regulation | ΔVOUT(ΔIOUT) | -0.5 | 0.5 | % | 1 mA ≤ IOUT ≤ 200 mA | 6 | |
| Ground pin current | IGND | 2 | 4.5 | µA | IOUT = 0 mA | 6 | |
| Shutdown current | ISHUTDOWN | 325 | 650 | nA | VEN ≤ 0.4 V, VIN = 2.4 V, Iout = 0 mA | 6 | |
| Output current limit | ICL | 250 | 410 | 620 | mA | VOUT = 0.9 × VOUT(nom) | 6 |
| Dropout voltage | VDO | 110 | 160 | mV | IOUT = 100 mA | 6 | |
| Dropout voltage | VDO | 160 | 250 | mV | IOUT = 200 mA | 6 | |
| UVLO threshold rising | VUVLO(RISING) | 1.95 | 2.15 | 2.35 | V | VIN rising | 6 |
| UVLO threshold falling | VUVLO(FALLING) | 1.85 | 2.09 | 2.25 | V | VIN falling | 6 |
| Enable pin high-level input voltage | VEN(HI) | 0.9 | V | Device enabled | 6 | ||
| Enable pin low-level input voltage | VEN(LOW) | 0.4 | V | Device disabled | 6 | ||
| Input voltage | VIN | 2.4 | 18 | V | 5 | ||
| Output voltage (fixed version) | VOUT | 1.25 | 5.5 | V | Fixed-voltage version | 5 | |
| Output current | IOUT | 0 | 200 | mA | 5 | ||
| Enable voltage | VEN | 0 | 18 | V | 5 | ||
| Output capacitor | COUT | 1 | 2.2 | 100 | µF | All capacitor values assumed to derate to 50% of nominal | 5 |
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Input voltage | VIN | -0.3 | 20 | V | With respect to GND | 4 | |
| Output voltage | VOUT | -0.3 | V | Max printed as VIN + 0.3 V or 20 V (whichever is smaller); with respect to GND | 4 | ||
| Enable voltage | VEN | -0.3 | 20 | V | With respect to GND | 4 | |
| Operating junction temperature | TJ | -50 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DBV, SOT23-5) | RθJA | 167.8 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DBV) | RθJC(top) | 86.7 | °C/W | 5 | |||
| Junction-to-board thermal resistance (DBV) | RθJB | 38.4 | °C/W | 5 | |||
| Junction-to-top characterization parameter (DBV) | ψJT | 14.5 | °C/W | 5 | |||
| Junction-to-board characterization parameter (DBV) | ψJB | 38.1 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TPS7A2450DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps7a2450dbvr-etched.step/tps7a2450dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a2450dbvr.step/tps7a2450dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet, copy hosted by ti.com (31 pp, sha256
8c6a0352ce73fc7b, retrieved 2026-09-23, tier: lcsc) (the maker's link now serves a different file than the copy stored here) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS7A2450DBVR
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS7A2450DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin accepting 2.4 V to 18 V; requires minimum 1 μF input capacitor placed close to the device for transient response. |
| 2 | GND | power_in | Ground reference pin. |
| 3 | EN | input | Enable input pin; logic high (≥0.9 V) enables the regulator and logic low (≤0.4 V) disables to shutdown mode. |
| 4 | NC | unconnected | No internal connection on fixed-version device; pin can float but provides better thermal performance when tied to GND. |
| 5 | OUT | power_out | Regulated 5.0 V output pin with ±1.25% accuracy over temperature; delivers up to 200 mA with 1 μF to 100 μF output capacitor required for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (fixed output versions, TJ = -40 to 125 °C) | VOUT | -1.25 | | 1.25 | % | Fixed output versions, TJ = -40℃ to 125℃ | 6 |
| Output voltage accuracy (fixed output versions, TJ = 25 °C) | VOUT | -0.5 | | 0.5 | % | Fixed output versions, TJ = 25℃ | 6 |
| Line regulation | ΔVOUT(ΔVIN) | -0.25 | | 0.25 | % | (VOUT(nom) + 0.5 V or 2.4 V) ≤ VIN ≤ 18 V | 6 |
| Load regulation | ΔVOUT(ΔIOUT) | -0.5 | | 0.5 | % | 1 mA ≤ IOUT ≤ 200 mA | 6 |
| Ground pin current | IGND | | 2 | 4.5 | µA | IOUT = 0 mA | 6 |
| Shutdown current | ISHUTDOWN | | 325 | 650 | nA | VEN ≤ 0.4 V, VIN = 2.4 V, Iout = 0 mA | 6 |
| Output current limit | ICL | 250 | 410 | 620 | mA | VOUT = 0.9 × VOUT(nom) | 6 |
| Dropout voltage | VDO | | 110 | 160 | mV | IOUT = 100 mA | 6 |
| Dropout voltage | VDO | | 160 | 250 | mV | IOUT = 200 mA | 6 |
| UVLO threshold rising | VUVLO(RISING) | 1.95 | 2.15 | 2.35 | V | VIN rising | 6 |
| UVLO threshold falling | VUVLO(FALLING) | 1.85 | 2.09 | 2.25 | V | VIN falling | 6 |
| Enable pin high-level input voltage | VEN(HI) | 0.9 | | | V | Device enabled | 6 |
| Enable pin low-level input voltage | VEN(LOW) | | | 0.4 | V | Device disabled | 6 |
| Input voltage | VIN | 2.4 | | 18 | V | | 5 |
| Output voltage (fixed version) | VOUT | 1.25 | | 5.5 | V | Fixed-voltage version | 5 |
| Output current | IOUT | 0 | | 200 | mA | | 5 |
| Enable voltage | VEN | 0 | | 18 | V | | 5 |
| Output capacitor | COUT | 1 | 2.2 | 100 | µF | All capacitor values assumed to derate to 50% of nominal | 5 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 5 |
| Input voltage | VIN | -0.3 | | 20 | V | With respect to GND | 4 |
| Output voltage | VOUT | -0.3 | | | V | Max printed as VIN + 0.3 V or 20 V (whichever is smaller); with respect to GND | 4 |
| Enable voltage | VEN | -0.3 | | 20 | V | With respect to GND | 4 |
| Operating junction temperature | TJ | -50 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance (DBV, SOT23-5) | RθJA | | 167.8 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance (DBV) | RθJC(top) | | 86.7 | | °C/W | | 5 |
| Junction-to-board thermal resistance (DBV) | RθJB | | 38.4 | | °C/W | | 5 |
| Junction-to-top characterization parameter (DBV) | ψJT | | 14.5 | | °C/W | | 5 |
| Junction-to-board characterization parameter (DBV) | ψJB | | 38.1 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `TPS7A2450DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tps7a2450dbvr-etched.step` / `tps7a2450dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7a2450dbvr.step` / `tps7a2450dbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet, copy hosted by ti.com](https://www.ti.com/cn/lit/gpn/tps7a24) (31 pp, sha256 `8c6a0352ce73fc7b`, retrieved 2026-09-23, tier: lcsc) (the maker's link now serves a different file than the copy stored here)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps7a2450dbvr-datasheet.pdf)