component
TPS7A2030PDQNR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, X2SON-4(1x1). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS7A2030PDQNR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · X2SON-4(1x1)
TPS7A2030PDQNR from Texas Instruments, in a X2SON-4(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulated output voltage with low ESR capacitor required to GND for stability and internal 150Ω pulldown resistor in shutdown mode (VEN < VEN(LOW)). |
| 2 | GND | power_in | Common ground. |
| 3 | EN | input | Enable input with internal 500kΩ pulldown resistor; low voltage (< VEN(LOW)) disables and discharges output; high voltage (> VEN(HI)) enables output and disconnects pulldown. |
| 4 | IN | power_in | Input voltage supply; use nominal value or larger capacitor from IN to ground as listed in Recommended Operating Conditions for best transient response and minimal input impedance. |
| 5 | Thermal Pad | passive | Thermal pad for X2SON package; connect to GND or leave floating; do not connect to any potential other than GND; connect to large-area ground plane for best thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | X2SON-4(1x1) |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS7A2030PDQNR - Footprint:
Package_SON:Texas_X2SON-4_1x1mm_P0.65mm - 3D model: X2SON-4(1x1), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.4 mm nominal X2SON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps7a2030pdqnr-etched.step/tps7a2030pdqnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a2030pdqnr.step/tps7a2030pdqnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (63 pp, sha256
f865f163779e6948, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).