main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps7a20185pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps7a20185pdbvr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md tps7a20185pdbvr: one-pass backfill (citation: different_file, hero prebuilt (inputs unchanged)) · Ray
tps7a20185pdbvr-etched.fit.json tps7a20185pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a20185pdbvr-etched.glb tps7a20185pdbvr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
tps7a20185pdbvr-etched.step tps7a20185pdbvr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
tps7a20185pdbvr-hero.glb tps7a20185pdbvr: hero from the plain model · Ray
tps7a20185pdbvr-hero.overlay.json tps7a20185pdbvr: hero from the plain model · Ray
tps7a20185pdbvr.glb Publish 0.1.0 · Ray
tps7a20185pdbvr.kicad_mod Publish 0.1.0 · Ray
tps7a20185pdbvr.kicad_sym Publish 0.1.0 · Ray
tps7a20185pdbvr.lbr Publish 0.1.0 · Ray
tps7a20185pdbvr.step Publish 0.1.0 · Ray

TPS7A20185PDBVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TPS7A20185PDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage supply from 1.6V to 6.0V; use nominal value or larger capacitor from IN to ground as listed in Recommended Operating Conditions; place input capacitor as close to IN and GND pins as possible for best transient response and minimum input impedance.
2 GND power_in Common ground.
3 EN input Enable input; active high; voltage less than VEN(LOW) 0.3V turns regulator off and discharges output to GND; voltage greater than VEN(HI) 0.9V enables regulator output; has internal 500kΩ pulldown resistor to hold regulator off by default.
4 N/C unconnected No internal electrical connection.
5 OUT output Regulated output voltage from 0.8V to 5.5V; low ESR capacitor required from OUT to ground for stability; minimum 1µF recommended; internal 150Ω typical pulldown resistor prevents charge remaining on VOUT in shutdown mode; place output capacitor as close to OUT and GND pins as possible.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TPS7A20185PDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps7a20185pdbvr-etched.step / tps7a20185pdbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a20185pdbvr.step / tps7a20185pdbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet, copy hosted by ti.com (63 pp, sha256 f865f163779e6948, retrieved 2026-09-24, tier: lcsc) (the maker's link now serves a different file than the copy stored here)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF