← Commit history

tps7a20185pdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·21725fa889 · ·parent c7fd1b7
2 files changed +86−6
package.json+44−4
@@ -65,7 +65,7 @@         "number": "3",         "name": "EN",         "type": "input",-        "description": "Enable input; active high; voltage less than VEN(LOW) 0.3V turns regulator off and discharges output to GND; voltage greater than VEN(HI) 0.9V enables regulator output; has internal 500k\u03a9 pulldown resistor to hold regulator off by default."+        "description": "Enable input; active high; voltage less than VEN(LOW) 0.3V turns regulator off and discharges output to GND; voltage greater than VEN(HI) 0.9V enables regulator output; has internal 500kΩ pulldown resistor to hold regulator off by default."       },       {         "number": "4",@@ -77,7 +77,7 @@         "number": "5",         "name": "OUT",         "type": "output",-        "description": "Regulated output voltage from 0.8V to 5.5V; low ESR capacitor required from OUT to ground for stability; minimum 1\u00b5F recommended; internal 150\u03a9 typical pulldown resistor prevents charge remaining on VOUT in shutdown mode; place output capacitor as close to OUT and GND pins as possible."+        "description": "Regulated output voltage from 0.8V to 5.5V; low ESR capacitor required from OUT to ground for stability; minimum 1µF recommended; internal 150Ω typical pulldown resistor prevents charge remaining on VOUT in shutdown mode; place output capacitor as close to OUT and GND pins as possible."       }     ],     "provenance": {@@ -112,6 +112,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps7a20185pdbvr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps7a20185pdbvr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "7a87c74092d8aaae63d307cd2f1679e4dcefab93a4a6e754ce871ca2ebe98239",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -97,7 +97,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps7a20185pdbvr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps7a20185pdbvr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "7a87c74092d8aaae63d307cd2f1679e4dcefab93a4a6e754ce871ca2ebe98239",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -144,4 +184,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}