main
Ray
tps7a2012pdbvr: one-pass backfill (citation: different_file, hero prebuilt (inputs unchanged))
d494ab4
TPS7A2012PDBVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS7A2012PDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply; for best transient response, use a nominal capacitor from IN to ground per Recommended Operating Conditions, placed as close as possible to IN and GND pins. |
| 2 | GND | power_in | Common ground. |
| 3 | EN | input | Enable input; voltage less than VEN(LOW) disables regulator and discharges output to GND, voltage greater than VEN(HI) enables regulator output; has internal 500kΩ pulldown resistor. |
| 4 | N/C | unconnected | No internal electrical connection. |
| 5 | OUT | power_out | Regulated output voltage; requires low ESR capacitor from OUT to ground for stability and uses nominal recommended value or larger per Recommended Operating Conditions; internal 150Ω pulldown resistor prevents charge remaining on VOUT when regulator disabled. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS7A2012PDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps7a2012pdbvr-etched.step/tps7a2012pdbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a2012pdbvr.step/tps7a2012pdbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet, copy hosted by ti.com (63 pp, sha256
f865f163779e6948, retrieved 2026-09-23, tier: lcsc) (the maker's link now serves a different file than the copy stored here) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS7A2012PDBVR
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS7A2012PDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply; for best transient response, use a nominal capacitor from IN to ground per Recommended Operating Conditions, placed as close as possible to IN and GND pins. |
| 2 | GND | power_in | Common ground. |
| 3 | EN | input | Enable input; voltage less than VEN(LOW) disables regulator and discharges output to GND, voltage greater than VEN(HI) enables regulator output; has internal 500kΩ pulldown resistor. |
| 4 | N/C | unconnected | No internal electrical connection. |
| 5 | OUT | power_out | Regulated output voltage; requires low ESR capacitor from OUT to ground for stability and uses nominal recommended value or larger per Recommended Operating Conditions; internal 150Ω pulldown resistor prevents charge remaining on VOUT when regulator disabled. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## CAD (KiCad official)
- Symbol: `TPS7A2012PDBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tps7a2012pdbvr-etched.step` / `tps7a2012pdbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7a2012pdbvr.step` / `tps7a2012pdbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet, copy hosted by ti.com](http://www.ti.com/cn/lit/gpn/tps7a20) (63 pp, sha256 `f865f163779e6948`, retrieved 2026-09-23, tier: lcsc) (the maker's link now serves a different file than the copy stored here)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps7a2012pdbvr-datasheet.pdf)