← Commit history

Initial commit: component/tps7a1650dgnr

Ray ·5522b33e48 ·
2 files changed +196
README.mdadded+46
@@ -0,0 +1,46 @@+# TPS7A1650DGNR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · MSOP-8-EP++TPS7A1650DGNR from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUT | power_out | Regulator output pin; requires a capacitor ≥2.2 µF to GND for stability (10 µF ceramic recommended for best AC performance). |+| 2 | FB/DNC | unconnected | For the fixed-output TPS7A1650, this pin must not be connected to any electrical net, including GND or IN. |+| 3 | PG | output | Open-drain power-good output; pulls low when VOUT falls below the PG trip threshold, otherwise high-impedance; leave open or tie to GND if unused. |+| 4 | GND | power_in | Ground pin. |+| 5 | EN | input | Enable pin; regulator is enabled when VEN ≥ VEN_HI and disabled when VEN ≤ VEN_LO; can be tied to IN if unused (VEN ≤ VIN at all times). |+| 6 | NC | unconnected | No internal connection; may be left open or tied to any voltage between GND and IN. |+| 7 | DELAY | output | Delay pin; connect a capacitor to GND to set the programmable power-good delay time, or leave open if the reset/delay function is not needed. |+| 8 | IN | power_in | Regulator input supply pin; requires a capacitor ≥0.1 µF to GND for stability (10 µF ceramic recommended to reduce PCB layout sensitivity). |+| 9 | PowerPAD | power_in | Exposed thermal pad; should be soldered to the PCB and connected to the GND plane to enhance thermal performance (can be left floating but TI highly recommends GND connection). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-8-EP |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `TPS7A1650DGNR`+- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`+- 3D model: MSOP-8-EP (KiCad packages3D, STEP)+- 3D model files: `tps7a1650dgnr-etched.step` / `tps7a1650dgnr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7a1650dgnr.step` / `tps7a1650dgnr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps7a16) (37 pp, sha256 `180ec3f485b2772b`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps7a1650dgnr-datasheet.pdf)
page.jsonadded+150
@@ -0,0 +1,150 @@+{+  "slug": "tps7a1650dgnr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps7a1650dgnr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps7a1650dgnr.kicad_sym",+    "tps7a1650dgnr.kicad_mod",+    "tps7a1650dgnr.glb",+    "tps7a1650dgnr.step",+    "tps7a1650dgnr.lbr",+    "docs/hero.png",+    "docs/tps7a1650dgnr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS7A1650DGNR",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-8-EP",+    "pin_count": 9,+    "category": "Power Management (PMIC)",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps7a16",+    "parts": {+      "symbol": "tps7a1650dgnr.kicad_sym",+      "footprint": "tps7a1650dgnr.kicad_mod",+      "model_3d": "tps7a1650dgnr-etched.glb",+      "model_3d_plain": "tps7a1650dgnr.glb",+      "model_3d_step": "tps7a1650dgnr-etched.step",+      "model_3d_step_plain": "tps7a1650dgnr.step",+      "lbr": "tps7a1650dgnr.lbr"+    },+    "distributor_links": {+      "lcsc": "C468238"+    },+    "pins": [+      {+        "number": "1",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulator output pin; requires a capacitor ≥2.2 µF to GND for stability (10 µF ceramic recommended for best AC performance)."+      },+      {+        "number": "2",+        "name": "FB/DNC",+        "type": "unconnected",+        "description": "For the fixed-output TPS7A1650, this pin must not be connected to any electrical net, including GND or IN."+      },+      {+        "number": "3",+        "name": "PG",+        "type": "output",+        "description": "Open-drain power-good output; pulls low when VOUT falls below the PG trip threshold, otherwise high-impedance; leave open or tie to GND if unused."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin."+      },+      {+        "number": "5",+        "name": "EN",+        "type": "input",+        "description": "Enable pin; regulator is enabled when VEN ≥ VEN_HI and disabled when VEN ≤ VEN_LO; can be tied to IN if unused (VEN ≤ VIN at all times)."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; may be left open or tied to any voltage between GND and IN."+      },+      {+        "number": "7",+        "name": "DELAY",+        "type": "output",+        "description": "Delay pin; connect a capacitor to GND to set the programmable power-good delay time, or leave open if the reset/delay function is not needed."+      },+      {+        "number": "8",+        "name": "IN",+        "type": "power_in",+        "description": "Regulator input supply pin; requires a capacitor ≥0.1 µF to GND for stability (10 µF ceramic recommended to reduce PCB layout sensitivity)."+      },+      {+        "number": "9",+        "name": "PowerPAD",+        "type": "power_in",+        "description": "Exposed thermal pad; should be soldered to the PCB and connected to the GND plane to enhance thermal performance (can be left floating but TI highly recommends GND connection)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: FB/DNC pin (PIN 2) must not be connected for TPS7A1650 fixed-voltage variant; datasheet explicitly s",+          "exposed pad 9 added from the footprint"+        ],+        "pages_sent": 37,+        "cost_usd": 0.3349,+        "at": "2026-09-24T07:44:58"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps7a16",+        "pages": 37,+        "sha256": "180ec3f485b2772b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file