component
TPS7A1633DGNR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HVSSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -52,7 +52,7 @@ "number": "1", "name": "OUT", "type": "power_out",- "description": "Regulator output pin; a capacitor of at least 2.2 \u00b5F must be tied from this pin to ground to assure stability, with TI recommending a 10-\u00b5F ceramic capacitor to maximize AC performance."+ "description": "Regulator output pin; a capacitor of at least 2.2 µF must be tied from this pin to ground to assure stability, with TI recommending a 10-µF ceramic capacitor to maximize AC performance." }, { "number": "2",@@ -76,7 +76,7 @@ "number": "5", "name": "EN", "type": "input",- "description": "Enable pin that turns the regulator on when VEN \u2265 VEN_HI and off when VEN \u2264 VEN_LO; if unused, tie to IN, ensuring VEN never exceeds VIN."+ "description": "Enable pin that turns the regulator on when VEN ≥ VEN_HI and off when VEN ≤ VEN_LO; if unused, tie to IN, ensuring VEN never exceeds VIN." }, { "number": "6",@@ -94,7 +94,7 @@ "number": "8", "name": "IN", "type": "power_in",- "description": "Regulator input supply pin; a capacitor of at least 0.1 \u00b5F must be tied from this pin to ground for stability, with TI recommending a 10-\u00b5F ceramic capacitor close to the device to reduce sensitivity to PCB layout."+ "description": "Regulator input supply pin; a capacitor of at least 0.1 µF must be tied from this pin to ground for stability, with TI recommending a 10-µF ceramic capacitor close to the device to reduce sensitivity to PCB layout." }, { "number": "9",@@ -180,5 +180,8 @@ "docs/tps7a1633dgnr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }