TPS7A1601ADGNR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps7a1601adgnr",
  "title": "TPS7A1601ADGNR",
  "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tps7a1601adgnr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS7A1601ADGNR",
    "manufacturer": "Texas Instruments",
    "package": "HVSSOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603074549911478272",
    "parts": {
      "symbol": "tps7a1601adgnr.kicad_sym",
      "footprint": "tps7a1601adgnr.kicad_mod",
      "model_3d": "tps7a1601adgnr-hero.glb",
      "model_3d_plain": "tps7a1601adgnr.glb",
      "model_3d_step": "tps7a1601adgnr-etched.step",
      "model_3d_step_plain": "tps7a1601adgnr.step",
      "lbr": "tps7a1601adgnr.lbr"
    },
    "distributor_links": {
      "lcsc": "C6886485",
      "digikey": "296-TPS7A1601ADGNRTR-ND",
      "mouser": "595-TPS7A1601ADGNR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T20:25:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS7A1601ADGNRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS7A1601ADGNR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output pin; a capacitor greater than 2.2 µF must be tied from this pin to ground for stability, and a 10-µF ceramic capacitor is recommended as close to the device as possible."
      },
      {
        "number": "2",
        "name": "FB/DNC",
        "type": "input",
        "description": "For the adjustable version this is the feedback input to the control-loop error amplifier that sets the output voltage through external resistors; do not route this pin to any net, including GND or IN, on fixed-voltage versions."
      },
      {
        "number": "3",
        "name": "PG",
        "type": "output",
        "description": "Open-collector, active-high power-good output with a user-programmable delay; leave open or connect to GND if the power-good function is not needed."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable pin that turns the regulator on when VEN is at or above VEN_HI and off when VEN is at or below VEN_LO; it may be tied to IN if unused, and VEN must remain at or below VIN at all times."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; this pin can be left open or tied to any voltage between GND and IN."
      },
      {
        "number": "7",
        "name": "DELAY",
        "type": "output",
        "description": "Delay pin for the PG delay time; connect a capacitor to GND to set the delay, or leave open if the reset function is not needed, with DELAY pin voltage specified from 0 V to 5 V."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Regulator input supply pin, operating from 3 V to 60 V; a capacitor greater than 0.1 µF must be tied from this pin to ground for stability, and a 10-µF ceramic capacitor is recommended close to the device."
      },
      {
        "number": "9",
        "name": "Thermal pad",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad is listed in Table 5-1 as 'Pad' with no pin number, so it is not included in the pin; The datasheet covers the TPS7A16A family. The TPS7A1601A ordering code (adjustable, DGN, reel) is in",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 8,
        "cost_usd": 0.05,
        "at": "2026-10-08T20:24:56"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603074549911478272",
        "pages": 25,
        "sha256": "28655df2042aed38",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7a1601adgnr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.91,
          3,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "be174a651861e764994f8be73d5e3ebcda500c1061a60fae9d8182b378444076",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7a1601adgnr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.91,
          3,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5bf7d1fc4d1bbd47f94621da3867f7a3b3401c31f2cce905046afca5e0df60c5",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HVSSOP-8",
      "Category": "Power Management (PMIC)",
      "Pins": "9"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps7a1601adgnr"
  ],
  "discovery_pitch": "TPS7A1601ADGNR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7a1601adgnr.kicad_sym",
    "tps7a1601adgnr.kicad_mod",
    "tps7a1601adgnr.glb",
    "tps7a1601adgnr.step",
    "tps7a1601adgnr.lbr",
    "docs/hero.png",
    "docs/tps7a1601adgnr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps7a1601adgnr-hero.glb",
    "tps7a1601adgnr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}