main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps7a0331pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps7a0331pdbvr: viewers · Ray
package.json tps7a0331pdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps7a0331pdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps7a0331pdbvr · Ray
tps7a0331pdbvr-etched.fit.json tps7a0331pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a0331pdbvr-etched.glb tps7a0331pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a0331pdbvr-etched.step tps7a0331pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a0331pdbvr.glb Publish 0.1.0 · Ray
tps7a0331pdbvr.kicad_mod Publish 0.1.0 · Ray
tps7a0331pdbvr.kicad_sym Publish 0.1.0 · Ray
tps7a0331pdbvr.lbr Publish 0.1.0 · Ray
tps7a0331pdbvr.step Publish 0.1.0 · Ray

TPS7A0331PDBVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TPS7A0331PDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply pin; use 1µF or larger ceramic capacitor from IN to ground to ensure stable operation and achieve good transient response.
2 GND power_in Ground return pin; connect to board ground plane.
3 EN input Enable input pin (high active); drive above VEN(HI)=1.1V to enable or below VEN(LOW)=0.3V to disable; includes internal pull-down resistor (REN(PULLDOWN)=500kΩ typical) that disconnects when EN is externally driven high and device is enabled.
4 NC unconnected No connection pin; not internally connected, may be grounded or left floating.
5 OUT power_out Regulated output pin; requires 0.5µF or larger effective output capacitor from OUT to ground for stability, use 1µF to 22µF ceramic capacitor for good transient response, place as close as possible to device output.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TPS7A0331PDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps7a0331pdbvr-etched.step / tps7a0331pdbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a0331pdbvr.step / tps7a0331pdbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 b600f5cf1b9bede4, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF