main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps7a0309pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps7a0309pdbvr: viewers · Ray
package.json tps7a0309pdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps7a0309pdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps7a0309pdbvr · Ray
tps7a0309pdbvr-etched.fit.json tps7a0309pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a0309pdbvr-etched.glb tps7a0309pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a0309pdbvr-etched.step tps7a0309pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps7a0309pdbvr.glb Publish 0.1.0 · Ray
tps7a0309pdbvr.kicad_mod Publish 0.1.0 · Ray
tps7a0309pdbvr.kicad_sym Publish 0.1.0 · Ray
tps7a0309pdbvr.lbr Publish 0.1.0 · Ray
tps7a0309pdbvr.step Publish 0.1.0 · Ray

TPS7A0309PDBVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TPS7A0309PDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Input pin; use recommended value or higher ceramic capacitor between IN and ground for excellent transient response and minimal input impedance; place input capacitor as close as possible to device input.
2 GND power_in Ground pin; connect this pin to board ground.
3 EN input Enable pin; drive to logic high to enable device, logic low or floating to disable; has internal pull-down resistor that disconnects when externally driven high and device has started.
4 NC unconnected No connection pin; not internally connected; ground or leave floating.
5 OUT output Regulated output pin; requires 0.5µF or larger effective capacitor between OUT and ground for stability; use 1µF or larger ceramic for excellent transient response; place output capacitor as close as possible to device output.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TPS7A0309PDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps7a0309pdbvr-etched.step / tps7a0309pdbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a0309pdbvr.step / tps7a0309pdbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 b600f5cf1b9bede4, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF