main
History Download
Ray tps79912drvr: specified limits as data (metadata.characteristics, 24 rows from the datasheet) 00ded47

TPS79912DRVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)

TPS79912DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Output of the regulator; to assure stability, a small ceramic capacitor (total typical capacitance ≥ 2 μF) is required from this pin to ground.
2 NR passive Fixed voltage versions only: noise-reduction pin; connecting this pin to an external capacitor bypasses noise generated by the internal band gap, allowing output noise to be reduced to very low levels.
3 GND power_in Ground pin; the exposed thermal pad must also be tied to GND.
4 EN input Driving this pin high turns on the regulator; driving this pin low puts the regulator into shutdown mode; EN can be connected to IN if not used.
5 N/C unconnected Not internally connected; this pin must either be left open or tied to GND.
6 IN power_in Input supply pin, recommended operating range 2.7 V to 6.5 V.
7 GND power_in Exposed thermal pad; must be soldered and tied to GND for thermal and mechanical performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6-EP(2x2)
Category Power Management (PMIC)
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output accuracy, nominal -1 1 % TJ = 25°C 5
Output accuracy over VIN, IOUT, temperature -2 2 % VOUT + 0.3 V ≤ VIN ≤ 6.5 V; 500 μA ≤ IOUT ≤ 200 mA 5
Undervoltage lockout UVLO 1.9 2.2 2.65 V VIN rising 5
Enable high (enabled) VEN(HI) 1.2 V 5
Enable low (shutdown) VEN(LO) 0 0.4 V 5
Dropout voltage VDO 100 175 mV VIN = VOUT(nom) – 0.1 V, IOUT = 200 mA, VOUT(nom) ≤ 3.3 V 5
Output current limit ICL 220 400 600 mA VOUT = 0.9 × VOUT(nom) 5
Ground pin current IGND 40 60 μA 500 μA ≤ IOUT ≤ 200 mA 5
Shutdown current (IGND) ISHDN 0.15 1 μA VEN ≤ 0.4 V, 2.7 V ≤ VIN ≤ 6.5 V 5
Enable pin current, enabled IEN(HI) 0.03 1 μA VEN = VIN = 6.5 V 5
Input voltage (absolute maximum) IN -0.3 7 V Over operating junction temperature range 4
Enable voltage (absolute maximum) EN -0.3 V Maximum printed as VIN + 0.3 V 4
Output voltage (absolute maximum) OUT -0.3 V Maximum printed as VIN + 0.3 V 4
Operating virtual junction temperature (absolute maximum) TJ -55 150 °C 4
Storage temperature Tstg -55 150 °C 4
Input voltage VIN 2.7 6.5 V Minimum VIN = VOUT + VDO or 2.7 V, whichever is greater 4
Output current IOUT 0.5 200 mA 4
Operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance (DRV, WSON) RθJA 74.2 °C/W DRV (WSON) 6-pin package 4
Junction-to-case (top) thermal resistance (DRV, WSON) RθJC(top) 58.8 °C/W DRV (WSON) 6-pin package 4
Junction-to-board thermal resistance (DRV, WSON) RθJB 145.9 °C/W DRV (WSON) 6-pin package 4
Junction-to-top characterization parameter (DRV, WSON) ψJT 0.2 °C/W DRV (WSON) 6-pin package 4
Junction-to-board characterization parameter (DRV, WSON) ψJB 54.4 °C/W DRV (WSON) 6-pin package 4
Junction-to-case (bottom) thermal resistance (DRV, WSON) RθJC(bot) 7.2 °C/W DRV (WSON) 6-pin package 4

CAD (KiCad official)

  • Symbol: TPS79912DRVR
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps79912drvr-etched.step / tps79912drvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps79912drvr.step / tps79912drvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 c8a9038c1b38653a, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF