main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps79718dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps79718dckr: viewers · Ray
package.json tps79718dckr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps79718dckr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps79718dckr · Ray
tps79718dckr-etched.fit.json tps79718dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps79718dckr-etched.glb tps79718dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps79718dckr-etched.step tps79718dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps79718dckr.glb Publish 0.1.0 · Ray
tps79718dckr.kicad_mod Publish 0.1.0 · Ray
tps79718dckr.kicad_sym Publish 0.1.0 · Ray
tps79718dckr.lbr Publish 0.1.0 · Ray
tps79718dckr.step Publish 0.1.0 · Ray

TPS79718DCKR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5

TPS79718DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PG tri_state Open-drain active-high power good output indicating regulated output voltage status; high-impedance state above approximately 90% of nominal voltage, low-impedance state during overload conditions below 90%
2 GND power_in Ground
3 NC unconnected No connection
4 IN power_in Power supply input accepting input voltage from 1.8 V to 5.5 V with minimum input determined by dropout voltage and output voltage
5 OUT power_out Regulated 3.3 V output voltage supporting continuous output current up to 50 mA with typical quiescent current of 1.2 µA

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TPS79718DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tps79718dckr-etched.step / tps79718dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps79718dckr.step / tps79718dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (21 pp, sha256 ace5c5708757b3ce, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF