TPS79650DCQR

{
  "slug": "tps79650dcqr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps79650dcqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps79650dcqr.kicad_sym",
    "tps79650dcqr.kicad_mod",
    "tps79650dcqr.glb",
    "tps79650dcqr.step",
    "tps79650dcqr.lbr",
    "docs/hero.png",
    "docs/tps79650dcqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps79650dcqr-hero.glb",
    "tps79650dcqr-hero.overlay.json",
    "tps79650dcqr-etched.glb"
  ],
  "component": {
    "mpn": "TPS79650DCQR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-223-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps796.pdf",
    "parts": {
      "symbol": "tps79650dcqr.kicad_sym",
      "footprint": "tps79650dcqr.kicad_mod",
      "model_3d": "tps79650dcqr-hero.glb",
      "model_3d_plain": "tps79650dcqr-etched.glb",
      "model_3d_step": "tps79650dcqr-etched.step",
      "model_3d_step_plain": "tps79650dcqr.step",
      "lbr": "tps79650dcqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2860666",
      "digikey": "296-19746-2-ND",
      "mouser": "595-TPS79650DCQR"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T23:09:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-19746-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS79650DCQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: driving EN high turns on the regulator, driving it low puts the regulator into shutdown, and EN can be connected to IN if not used."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Input to the device."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Regulator ground."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "power_out",
        "description": "Output of the regulator."
      },
      {
        "number": "5",
        "name": "NR/NC",
        "type": "passive",
        "description": "On the legacy chip this is the noise-reduction pin, where an external capacitor bypasses internal band-gap noise to improve PSRR and reduce output noise; on the new chip it is not internally connected and must be left open or tied to GND."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Tab of the SOT-223 package, regulator ground, same net as pin 3."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DCQ SOT-223-6 pinout is given in Table 4-1 and Figures 4-1 and 4-2 on page 3. The GND tab (Power"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0205,
        "at": "2026-11-05T23:09:01"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps796.pdf",
        "pages": 50,
        "sha256": "c1deafb8b70d6ac9",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps79650dcqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.475,
          6.7,
          1.6
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bf43e0f52215e5c8b069c660d1a580928edb1037d7f7155d98bb6d1df79e64ff",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps79650dcqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.475,
          6.7,
          1.6
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c95ee2162f1d4b5200ddec175bca5fd2102285cb1fd11fb2a8e4cb27d09efe68",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}