component
TPS79533DCQG4
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS79533DCQG4
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-6
TPS79533DCQG4 from Texas Instruments, in a SOT-223-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input: driving it high turns the regulator on and driving it low puts it in shutdown; VEN(HI) is 1.7 V minimum for the old chip and 0.85×VIN minimum for the new chip, VEN(LOW) is 0.7 V maximum for the old chip and 0.425 V maximum for the new chip, and EN can be tied to IN if shutdown is not needed. |
| 2 | IN | power_in | Regulator input supply: 2.7 V to 5.5 V for the old chip and 2.7 V to 6.0 V for the new chip, with absolute maximum VIN of 6 V (old chip) and 6.5 V (new chip), and a 1 µF input capacitor required on the new chip. |
| 3 | GND | power_in | Regulator ground, which must be connected to the ground plane and to the bypass capacitor ground returns. |
| 4 | OUT | power_out | Regulated output: 1 µF minimum ceramic output capacitor is required for stability, with absolute maximum VOUT of -0.3 V to 6 V and output current limited internally to 500 mA operating current. |
| 5 | NR | passive | On the old chip this is the noise-reduction pin for fixed-voltage versions, where an external capacitor of no more than 0.1 µF bypasses the internal bandgap noise; on the new chip it is listed as N/C (no internal connection). |
| 6 | GND | power_in | Pin 6 is the SOT-223 tab, which is electrically grounded and should be soldered to a large copper ground area for thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS79533DCQG4 - Footprint:
Package_TO_SOT_SMD:SOT-223-6 - 3D model: SOT-223-6 (KiCad packages3D, STEP)
- 3D model files:
tps79533dcqg4-etched.step/tps79533dcqg4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps79533dcqg4.step/tps79533dcqg4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
62643c6f836d43b8, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).