Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS79333DBVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TPS79333DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Device input; accepts supply voltage from 2.7V to 5.5V for normal LDO regulation.
2 GND power_in Regulator ground; return path for supply current and reference voltage for all circuit nodes.
3 EN input Enable pin (high-level active); drive above 0.85×VIN to enable regulator or below 0.425V to disable with quiescent current below 1μA; if unused, connect to IN.
4 NC/NR unconnected No connect pin (new chip variant); pin not internally connected; optionally connect to GND to improve thermal performance or leave floating.
5 OUT power_out Regulator output; provides 3.3V nominal regulated voltage for load currents from 0mA to 200mA with typical dropout of 112mV at full load.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range (recommended) VIN 2.7 5.5 V 4
Enable voltage (recommended) VEN 0 5.5 V 4
Output current (recommended) IOUT 0 200 mA 4
Operating junction temperature (recommended) TJ -40 125 °C 4
Output capacitor (recommended) COUT 2.2 10 µF 4
Input capacitor, old chip (recommended) CIN 0.1 1 µF 旧芯片 (old chip) 4
Noise-reduction capacitor (recommended) CNR 0 10 nF 旧芯片 only (old chip) 4
Feedforward capacitor, new chip (recommended) CFF 0 10 100 nF 新芯片 (new chip) 4
Input voltage range (electrical) VIN 2.7 5.5 V 5
Continuous output current (electrical) IOUT 0 200 mA 5
Output voltage TPS79333 VOUT 3.234 3.3 3.366 V 0µA < IOUT < 200mA,4.3V < VIN < 5.5V 5
Ground pin current, old chip IGND 170 220 µA 0µA ≤ IO ≤ 200mA(旧芯片) 5
Ground pin current, new chip IGND 250 1000 µA 0µA ≤ IO ≤ 200mA(新芯片) 5
Load regulation ΔVOUT/ΔIOUT 5 mV 0µA ≤ IOUT ≤ 200mA 5
Line regulation ΔVOUT/ΔVIN 0.05 0.12 %/V VOUT + 1V ≤ VIN ≤ 5.5V 5
Output current limit, old chip ICL 285 600 mA VOUT = 0V(旧芯片) 6
Output current limit, new chip ICL 320 460 mA VIN = VOUT(NOM) + 1V,VOUT = 0.9 x VOUT(NOM)(仅限新芯片) 6
Short-circuit current limit, new chip ISC 175 mA VOUT = 0V(新芯片) 6
Shutdown current, old chip ISHDN 0.07 1 µA VEN = 0V,2.7V < VI < 5.5V(旧芯片) 6
Shutdown current, new chip ISHDN 0.01 1 µA VEN = 0V,2.7V < VI < 5.5V(新芯片) 6
High-level enable input voltage, old chip VEN(HI) 1.7 V 2.7V ≤ VIN ≤ 5.5V 6
High-level enable input voltage, new chip VEN(HI) 0.85 V 2.7V ≤ VIN ≤ 5.5V(新芯片) 6
Low-level enable input voltage, old chip VEN(LOW) 0 0.7 V 2.7V ≤ VIN ≤ 5.5V 6
Low-level enable input voltage, new chip VEN(LOW) 0 0.425 V 2.7V ≤ VIN ≤ 5.5V(新芯片) 6
Enable pin current IEN -1 1 µA VEN = 0V 6
Dropout voltage TPS79333 VDO 112 180 mV VIN= VOUT - 0.1V,IOUT = 200mA 7
UVLO threshold, VIN rising, old chip VUVLO 2.25 2.65 V VIN 上升(旧芯片) 7
UVLO threshold, VIN rising, new chip VUVLO 1.32 1.6 V VIN 上升(新芯片) 7
UVLO hysteresis, old chip VUVLO(HYST) 100 mV TJ = 25°C,VCC 上升(旧芯片) 7
UVLO hysteresis, new chip VUVLO(HYST) 130 mV TJ = 25°C,VCC 上升(新芯片) 7
Input voltage, old chip VIN/VEN/VOUT VIN, VEN, VOUT -0.3 6 V 4
Input and enable voltage, new chip VIN, VEN -0.3 6.5 V 4
Output voltage, new chip VOUT -0.3 V 4
Operating junction temperature (absolute maximum) TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance, SOT-23-5 RθJA 182.3 °C/W DBV (SOT23-5), new chip 5
Junction-to-case (top) thermal resistance, SOT-23-5 RθJC(top) 114.8 °C/W DBV (SOT23-5), new chip 5
Junction-to-board thermal resistance, SOT-23-5 RθJB 79.1 °C/W DBV (SOT23-5), new chip 5
Junction-to-top characterization parameter, SOT-23-5 ψJT 56.8 °C/W DBV (SOT23-5), new chip 5
Junction-to-board characterization parameter, SOT-23-5 ψJB 78.8 °C/W DBV (SOT23-5), new chip 5

CAD (KiCad official)

  • Symbol: TPS79333DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps79333dbvr-etched.step / tps79333dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps79333dbvr.step / tps79333dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 879df492c12d5c09, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF