component
TPS79318DBVRQ1
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+42@@ -0,0 +1,42 @@+# TPS79318DBVRQ1++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5++TPS79318DBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Device input; the recommended VIN range is 2.7 V to 5.5 V, and the absolute maximum is -0.3 V to 6 V (old die) or 6.5 V (new die). |+| 2 | GND | power_in | Regulator ground pin; per the layout guidance, connect each ground plane only at this pin. |+| 3 | EN | input | Active-high enable input; the device is enabled above VEN(HI) (1.7 V min for old die, 0.85×VIN for new die) and shut down below VEN(LOW) (0.7 V max for old die, 0.425 V max for new die), and EN can be tied to IN if shutdown is not needed. |+| 4 | BYPASS / NC | passive | Die-dependent: on the old die this pin is the BYPASS node (external capacitor filters the 250 kΩ internal reference resistor, recommended 0.01 µF typ. with 0.1 µF noted in the typical application); on the new die it is not internally connected and should be tied to ground for thermal performance or left floating. |+| 5 | OUT | power_out | Regulated output; requires a stability capacitor to GND of at least 2.2 µF (old die) or a minimum effective 0.47 µF (new die), with COUT range 1 µF to 10 µF (old) and 1 µF to 200 µF (new) recommended. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOT-23-5 |+| Category | Power Management (PMIC) |+| Pins | 5 |++## CAD (KiCad official)++- Symbol: `TPS79318DBVRQ1`+- Footprint: `Package_TO_SOT_SMD:SOT-23-5`+- 3D model: SOT-23-5 (KiCad packages3D, STEP)+- 3D model files: `tps79318dbvrq1-etched.step` / `tps79318dbvrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps79318dbvrq1.step` / `tps79318dbvrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps793-q1) (40 pp, sha256 `7ea2cf405d5dd786`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps79318dbvrq1-datasheet.pdf)
page.jsonadded+182@@ -0,0 +1,182 @@+{+ "slug": "tps79318dbvrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps79318dbvrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps79318dbvrq1.kicad_sym",+ "tps79318dbvrq1.kicad_mod",+ "tps79318dbvrq1.glb",+ "tps79318dbvrq1.step",+ "tps79318dbvrq1.lbr",+ "docs/hero.png",+ "docs/tps79318dbvrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps79318dbvrq1-hero.glb",+ "tps79318dbvrq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS79318DBVRQ1",+ "manufacturer": "Texas Instruments",+ "package": "SOT-23-5",+ "pin_count": 5,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps793-q1",+ "parts": {+ "symbol": "tps79318dbvrq1.kicad_sym",+ "footprint": "tps79318dbvrq1.kicad_mod",+ "model_3d": "tps79318dbvrq1-hero.glb",+ "model_3d_plain": "tps79318dbvrq1.glb",+ "model_3d_step": "tps79318dbvrq1-etched.step",+ "model_3d_step_plain": "tps79318dbvrq1.step",+ "lbr": "tps79318dbvrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2877781",+ "digikey": "296-15306-2-ND",+ "mouser": "595-TPS79318DBVRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T02:16:31Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-15306-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS79318DBVRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Device input; the recommended VIN range is 2.7 V to 5.5 V, and the absolute maximum is -0.3 V to 6 V (old die) or 6.5 V (new die)."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Regulator ground pin; per the layout guidance, connect each ground plane only at this pin."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Active-high enable input; the device is enabled above VEN(HI) (1.7 V min for old die, 0.85×VIN for new die) and shut down below VEN(LOW) (0.7 V max for old die, 0.425 V max for new die), and EN can be tied to IN if shutdown is not needed."+ },+ {+ "number": "4",+ "name": "BYPASS / NC",+ "type": "passive",+ "description": "Die-dependent: on the old die this pin is the BYPASS node (external capacitor filters the 250 kΩ internal reference resistor, recommended 0.01 µF typ. with 0.1 µF noted in the typical application); on the new die it is not internally connected and should be tied to ground for thermal performance or left floating."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output; requires a stability capacitor to GND of at least 2.2 µF (old die) or a minimum effective 0.47 µF (new die), with COUT range 1 µF to 10 µF (old) and 1 µF to 200 µF (new) recommended."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 4 differs between die revisions: BYPASS on the old die and NC on the new die. The MPN TPS79318DB; Pins 1, 2, 3 and 5 are identical on both die revisions. Pin numbers and names follow Table 4-1 and F; The OUT pin description uses the stability capacitor range from Section 5.3 and the 0.47 µF minimum "+ ],+ "pages_sent": 22,+ "cost_usd": 0.1101,+ "at": "2026-10-08T02:16:13"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps793-q1",+ "pages": 40,+ "sha256": "7ea2cf405d5dd786",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps79318dbvrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps79318dbvrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "dc77274bfd57d1222925d5b82c636942caf9c8d1cd8e811b738af7a4c4dccfee",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}