component
TPS79318DBVRQ1
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS79318DBVRQ1
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS79318DBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Device input; the recommended VIN range is 2.7 V to 5.5 V, and the absolute maximum is -0.3 V to 6 V (old die) or 6.5 V (new die). |
| 2 | GND | power_in | Regulator ground pin; per the layout guidance, connect each ground plane only at this pin. |
| 3 | EN | input | Active-high enable input; the device is enabled above VEN(HI) (1.7 V min for old die, 0.85×VIN for new die) and shut down below VEN(LOW) (0.7 V max for old die, 0.425 V max for new die), and EN can be tied to IN if shutdown is not needed. |
| 4 | BYPASS / NC | passive | Die-dependent: on the old die this pin is the BYPASS node (external capacitor filters the 250 kΩ internal reference resistor, recommended 0.01 µF typ. with 0.1 µF noted in the typical application); on the new die it is not internally connected and should be tied to ground for thermal performance or left floating. |
| 5 | OUT | power_out | Regulated output; requires a stability capacitor to GND of at least 2.2 µF (old die) or a minimum effective 0.47 µF (new die), with COUT range 1 µF to 10 µF (old) and 1 µF to 200 µF (new) recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS79318DBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps79318dbvrq1-etched.step/tps79318dbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps79318dbvrq1.step/tps79318dbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
7ea2cf405d5dd786, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).