main
Ray Publish 0.1.0 c953d9d

TPS79301DBVREP

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-6

TPS79301DBVREP from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input to the device; the input must be at least 2.7 V or VO(typ) + 1 V, whichever is greater, and no more than 5.5 V, with absolute maximum input voltage of 6 V, and a 0.1-µF or larger ceramic bypass capacitor is required between IN and GND.
2 GND power_in Regulator ground, to which the input bypass and output capacitors connect and which should be connected directly to the bypass capacitor ground.
3 EN input Enable input that turns the device on when driven to logic high (2 V minimum) and places it in shutdown when driven to logic low (0.7 V maximum), with absolute maximum range of -0.3 V to VI + 0.3 V.
4 BYPASS passive External bypass capacitor connection which, together with an internal 250-kΩ resistor, forms a low-pass filter that reduces reference noise, and whose leakage current must be minimal to avoid output error.
5 FB input Feedback input voltage for the adjustable device, which sets the output through an external R1/R2 divider referenced to the 1.2246 V typical internal reference, with input current of 1 µA maximum at 1.8 V.
6 OUT power_out Regulated output of the device, which requires a minimum 2.2-µF ceramic capacitor to GND for stability and supplies up to 200 mA continuous output current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VI 2.7 5.5 V 4
Continuous output current IO 0 200 mA 4
Operating junction temperature TJ -55 125 °C 4
Output voltage VO 0.98 1.02 Vo 0 µA < IO < 200 mA, TJ = -40 to 125°C, 1.22 V ≤ VO ≤ 5.2 V 4
Output voltage VO 0.97 1.025 Vo 0 µA < IO < 200 mA, TJ = -55 to 125°C, 1.22 V ≤ VO ≤ 5.2 V 4
Output current limit 285 600 mA VO = 0 V 4
Load regulation 5 mV 0 µA < IO < 200 mA, TJ = 25°C 4
Output voltage line regulation (ΔVO/VO) ΔVO/VO 0.12 %/V VO + 1 V < VI ≤ 5.5 V 4
Standby current 0.07 1 µA EN = 0 V, 2.7 V < VI < 5.5 V 4
High-level enable input voltage 2 V 2.7 V < VI < 5.5 V 4
Low-level enable input voltage 0.7 V 2.7 V < VI < 5.5 V 4
Input current (EN) -1 1 µA EN = 0 4
Input current (FB) (TPS79301) 1 µA FB = 1.8 V 5
UVLO threshold 2.25 2.65 V VCC rising 5
Quiescent current (GND current) 170 µA 0 µA < IO < 200 mA, TJ = 25°C 4
Quiescent current (GND current) 220 µA 0 µA < IO < 200 mA 4
Output voltage line regulation (ΔVO/VO) ΔVO/VO 0.05 %/V VO + 1 V < VI ≤ 5.5 V, TJ = 25°C 4
UVLO hysteresis 100 mV TJ = 25°C, VCC rising 5
Input voltage range -0.3 6 V 3
Voltage on OUT -0.3 6 V 3
Voltage range at EN -0.3 V Maximum printed as VI + 0.3 V 3
Operating virtual junction temperature range TJ -55 125 °C 3
Storage temperature range Tstg -65 150 °C 3
ESD rating, Human-Body Model (HBM) 2 kV Human-Body Model (HBM) 3
ESD rating, Changed-Device Model (CDM) 500 V Changed-Device Model (CDM) 3
Thermal resistance, junction to case (DBV) RθJC 63.75 °C/W DBV package 3
Thermal resistance, junction to ambient, low-K board RθJA 256 °C/W DBV package, JEDEC low-K (1s) board 3
Thermal resistance, junction to ambient, high-K board RθJA 178.3 °C/W DBV package, JEDEC high-K (2s2p) board 3

CAD (KiCad official)

  • Symbol: TPS79301DBVREP
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps79301dbvrep-etched.step / tps79301dbvrep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps79301dbvrep.step / tps79301dbvrep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 914771336553ee4e, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF