TPS79101DBVREP

{
  "slug": "tps79101dbvrep",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps79101dbvrep",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps79101dbvrep.kicad_sym",
    "tps79101dbvrep.kicad_mod",
    "tps79101dbvrep.glb",
    "tps79101dbvrep.step",
    "tps79101dbvrep.lbr",
    "docs/hero.png",
    "docs/tps79101dbvrep-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps79101dbvrep-hero.glb",
    "tps79101dbvrep-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS79101DBVREP",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps79133-ep",
    "parts": {
      "symbol": "tps79101dbvrep.kicad_sym",
      "footprint": "tps79101dbvrep.kicad_mod",
      "model_3d": "tps79101dbvrep-hero.glb",
      "model_3d_plain": "tps79101dbvrep.glb",
      "model_3d_step": "tps79101dbvrep-etched.step",
      "model_3d_step_plain": "tps79101dbvrep.step",
      "lbr": "tps79101dbvrep.lbr"
    },
    "distributor_links": {
      "lcsc": "C2870778",
      "digikey": "296-22522-2-ND",
      "mouser": "595-TPS79101DBVREP"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T03:03:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-22522-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS79101DBVREP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "The IN terminal is the input to the device, with a recommended input voltage range of 2.7 V to 5.5 V and an absolute maximum of -0.3 V to 6 V."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Regulator ground pin."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "The enable input turns the regulator on when logic low (below 0.7 V) and places it in shutdown when logic high (2 V or above) for 2.7 V < VI < 5.5 V, with the EN voltage absolute maximum at VI + 0.3 V."
      },
      {
        "number": "4",
        "name": "BYPASS",
        "type": "passive",
        "description": "An external bypass capacitor on this terminal, combined with an internal 250 kΩ resistor, forms a low-pass filter that further reduces regulator noise."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input voltage for the adjustable device, used with external resistors R1 and R2 to set the output voltage (not connected on the fixed-output versions)."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "power_out",
        "description": "The OUT terminal is the regulated output of the device, rated for 0 to 100 mA continuous output current with internal current limiting."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet covers both a 5-pin fixed-output DBV pinout and a 6-pin adjustable DBV pinout. TPS7910; The page 2 top-view figure for the 6-pin package is garbled in text extraction and does not show the; The FB description and the 250 kΩ bypass resistor value come from the block diagram and terminal tab"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0593,
        "at": "2026-10-08T03:02:51"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps79133-ep",
        "pages": 24,
        "sha256": "76ef69b68cb3736a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps79101dbvrep.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps79101dbvrep-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "acbaaee3d6fe7c13526a7a60637047bf90255fef7a266fc07f292bb65e2226a7",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}