component
TPS78833DBVR
Public Made by Adomby adom
Texas Instruments Pre-ordered Chips, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TPS78833DBVR
Texas Instruments · Pre-ordered Chips · SOT-23-5
TPS78833DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | The IN terminal is the input to the device, with an input voltage range of 2.7 V to 10 V in the electrical characteristics and an absolute maximum of 13.5 V. |
| 2 | GND | power_in | Regulator ground pin for the device. |
| 3 | EN | input | Active-low enable input with a high-level threshold of 1.7 V minimum and a low-level threshold of 0.9 V maximum for 2.7 V < VI < 10 V, where EN = 0 V puts the regulator in standby with 2 µA maximum current. |
| 4 | SR | input | The SR terminal controls the in-rush current by setting the output voltage slew rate through an external slew-rate capacitor C(SR), such as 0.01 µF or 0.47 µF as used in the characteristic curves. |
| 5 | OUT | power_out | The OUT terminal is the regulated output of the device, providing 2.5 V (TPS78825) or 3.3 V (TPS78833) at a continuous output current of 0 to 150 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VI | 2.7 | 10 | V | 3 | ||
| Continuous output current | IO | 0 | 150 | mA | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Output voltage (TPS78833) | VO | 3.201 | 3.399 | V | 10 µA< IO < 150 mA, 3.8 V < VI < 10 V | 3 | |
| Quiescent current (GND current) | 28 | µA | 10 µA< IO < 150 mA | 3 | |||
| Dropout voltage (TPS78833) | 300 | mV | IO = 150 mA | 3 | |||
| High level enable input voltage | 1.7 | V | 2.7 V < VI < 10 V | 3 | |||
| Low level enable input voltage | 0.9 | V | 2.7 V < VI < 10 V | 3 | |||
| Input current (EN) | -1 | 1 | µA | EN = 0 | 3 | ||
| Standby current (TPS78833) | 1 | 2 | µA | EN = 0 V, 2.7 V < VI < 10 V | 3 | ||
| Output current limit | 350 | 750 | mA | VO = 0 V (see Note 4) | 3 | ||
| Output voltage line regulation (ΔVO/VO) | ΔVO/VO | 0.1 | %/V | VO + 1 V < VI ≤ 10 V (see Note 5) | 3 | ||
| Input voltage range | VI | -0.3 | 13.5 | V | 2 | ||
| Voltage at EN | -0.3 | V | Maximum printed as VI + 0.3 V | 2 | |||
| Voltage on OUT | 7 | V | 2 | ||||
| ESD rating, HBM | 2 | kV | 2 | ||||
| Operating virtual junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Operating ambient temperature range | TA | -40 | 85 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Thermal resistance junction-to-ambient (RθJA) | RθJA | 259 | °C/W | Low K (JEDEC 1s) board, DBV package | 2 | ||
| Thermal resistance junction-to-ambient (RθJA) | RθJA | 180 | °C/W | High K (JEDEC 2s2p) board, DBV package | 2 | ||
| Thermal resistance junction-to-case (RθJC) | RθJC | 65.8 | °C/W | DBV package, Low K and High K boards | 2 | ||
| Derating factor above TA = 25°C | 3.9 | mW/°C | Low K board | 2 | |||
| Derating factor above TA = 25°C | 5.6 | mW/°C | High K board | 2 | |||
| Power rating | 386 | mW | Low K board, TA ≤ 25°C | 2 | |||
| Power rating | 555 | mW | High K board, TA ≤ 25°C | 2 |
CAD (KiCad official)
- Symbol:
TPS78833DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps78833dbvr-etched.step/tps78833dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps78833dbvr.step/tps78833dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (12 pp, sha256
f3825ce312a905b9, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS78833DBVR
**Texas Instruments** · Pre-ordered Chips · SOT-23-5
TPS78833DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | The IN terminal is the input to the device, with an input voltage range of 2.7 V to 10 V in the electrical characteristics and an absolute maximum of 13.5 V. |
| 2 | GND | power_in | Regulator ground pin for the device. |
| 3 | EN | input | Active-low enable input with a high-level threshold of 1.7 V minimum and a low-level threshold of 0.9 V maximum for 2.7 V < VI < 10 V, where EN = 0 V puts the regulator in standby with 2 µA maximum current. |
| 4 | SR | input | The SR terminal controls the in-rush current by setting the output voltage slew rate through an external slew-rate capacitor C(SR), such as 0.01 µF or 0.47 µF as used in the characteristic curves. |
| 5 | OUT | power_out | The OUT terminal is the regulated output of the device, providing 2.5 V (TPS78825) or 3.3 V (TPS78833) at a continuous output current of 0 to 150 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VI | 2.7 | | 10 | V | | 3 |
| Continuous output current | IO | 0 | | 150 | mA | | 3 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 3 |
| Output voltage (TPS78833) | VO | 3.201 | | 3.399 | V | 10 µA< IO < 150 mA, 3.8 V < VI < 10 V | 3 |
| Quiescent current (GND current) | | | | 28 | µA | 10 µA< IO < 150 mA | 3 |
| Dropout voltage (TPS78833) | | | | 300 | mV | IO = 150 mA | 3 |
| High level enable input voltage | | 1.7 | | | V | 2.7 V < VI < 10 V | 3 |
| Low level enable input voltage | | | | 0.9 | V | 2.7 V < VI < 10 V | 3 |
| Input current (EN) | | -1 | | 1 | µA | EN = 0 | 3 |
| Standby current (TPS78833) | | | 1 | 2 | µA | EN = 0 V, 2.7 V < VI < 10 V | 3 |
| Output current limit | | | 350 | 750 | mA | VO = 0 V (see Note 4) | 3 |
| Output voltage line regulation (ΔVO/VO) | ΔVO/VO | | | 0.1 | %/V | VO + 1 V < VI ≤ 10 V (see Note 5) | 3 |
| Input voltage range | VI | -0.3 | | 13.5 | V | | 2 |
| Voltage at EN | | -0.3 | | | V | Maximum printed as VI + 0.3 V | 2 |
| Voltage on OUT | | | | 7 | V | | 2 |
| ESD rating, HBM | | | | 2 | kV | | 2 |
| Operating virtual junction temperature range | TJ | -40 | | 150 | °C | | 2 |
| Operating ambient temperature range | TA | -40 | | 85 | °C | | 2 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 2 |
| Thermal resistance junction-to-ambient (RθJA) | RθJA | | 259 | | °C/W | Low K (JEDEC 1s) board, DBV package | 2 |
| Thermal resistance junction-to-ambient (RθJA) | RθJA | | 180 | | °C/W | High K (JEDEC 2s2p) board, DBV package | 2 |
| Thermal resistance junction-to-case (RθJC) | RθJC | | 65.8 | | °C/W | DBV package, Low K and High K boards | 2 |
| Derating factor above TA = 25°C | | | 3.9 | | mW/°C | Low K board | 2 |
| Derating factor above TA = 25°C | | | 5.6 | | mW/°C | High K board | 2 |
| Power rating | | | 386 | | mW | Low K board, TA ≤ 25°C | 2 |
| Power rating | | | 555 | | mW | High K board, TA ≤ 25°C | 2 |
## CAD (KiCad official)
- Symbol: `TPS78833DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tps78833dbvr-etched.step` / `tps78833dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps78833dbvr.step` / `tps78833dbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps78833.pdf) (12 pp, sha256 `f3825ce312a905b9`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps78833dbvr-datasheet.pdf)