component
TPS78512QKVURQ1
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS78512QKVURQ1
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-4
TPS78512QKVURQ1 from Texas Instruments, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable pin controlled by logic signal to enable (high) or disable (low) the device; must not be left floating. |
| 2 | IN | power_in | Input power supply pin accepting 1.7V to 6.0V; place ≥1.0µF ceramic capacitor from IN to GND as close to pin as possible. |
| 3 | GND | power_in | Ground reference pin; must be connected to board ground and thermal plane for performance. |
| 4 | OUT | power_out | Regulated 1.2V output pin delivering up to 1A; requires ≥0.47µF capacitance to ground for stability, ≥1µF ceramic capacitor recommended. |
| 5 | NC | unconnected | No-connect pin internally unconnected; connect to ground for improved thermal performance or leave floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-252-4 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS78512QKVURQ1 - Footprint:
Package_TO_SOT_SMD:TO-252-4 - 3D model: TO-252-4 (KiCad packages3D, STEP)
- Annotated 3D hero:
tps78512qkvurq1-hero.glb(dashed pad outlines, silkscreen with pin 1, signal names; the adom-hero standard) is what the viewer shows. Downloads and EDA use the clean model,tps78512qkvurq1-etched.glb. - 3D model files:
tps78512qkvurq1-etched.step/tps78512qkvurq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps78512qkvurq1.step/tps78512qkvurq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
8d1b76473f2a1cce, retrieved 2026-10-02, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).