main
Ray Publish 0.1.0 ee67a98
{
  "slug": "tps78511qkvurq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps78511qkvurq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps78511qkvurq1.kicad_sym",
    "tps78511qkvurq1.kicad_mod",
    "tps78511qkvurq1.glb",
    "tps78511qkvurq1.step",
    "tps78511qkvurq1.lbr",
    "docs/hero.png",
    "docs/tps78511qkvurq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps78511qkvurq1-hero.glb",
    "tps78511qkvurq1-hero.overlay.json",
    "tps78511qkvurq1-etched.glb"
  ],
  "component": {
    "mpn": "TPS78511QKVURQ1",
    "manufacturer": "Texas Instruments",
    "package": "TO-252-4",
    "pin_count": 5,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps785-q1",
    "parts": {
      "symbol": "tps78511qkvurq1.kicad_sym",
      "footprint": "tps78511qkvurq1.kicad_mod",
      "model_3d": "tps78511qkvurq1-hero.glb",
      "model_3d_plain": "tps78511qkvurq1-etched.glb",
      "model_3d_step": "tps78511qkvurq1-etched.step",
      "model_3d_step_plain": "tps78511qkvurq1.step",
      "lbr": "tps78511qkvurq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C3747726",
      "mouser": "595-TPS78511QKVURQ1"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T10:31:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 876 calls left today"
      },
      "mouser": {
        "pn": "595-TPS78511QKVURQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Active-high enable: driving above VEN(HI) (0.9 V typical) enables the device and below VEN(LOW) (0.3 V) disables it, with the recommended EN voltage range 0 V to 6 V; do not float this pin, and connect EN to IN if shutdown is not used."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin, with an input voltage range of 1.7 V to 6.0 V; place a 0.1 µF to 1 µF (nominal recommended value or larger) ceramic capacitor from IN to GND as close to the device as possible."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected to board ground; the thermal pad is electrically connected to this pin."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output with up to 1 A output current; a minimum of 0.47 µF effective capacitance to ground is required for stability, and a 1 µF or larger ceramic capacitor is recommended for best transient response, placed as close to the pin as possible."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No-connect pin on the fixed-voltage version that is not internally connected; connect to ground for best thermal performance or leave floating."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package mismatch: the hint says TO-252-4, but the datasheet defines the KVU package as 5-pin TO-252 ; Variant ambiguity: the datasheet device nomenclature says '01' denotes adjustable and does not expli; The thermal pad on the TO-252 package is not a numbered pin in the datasheet and is therefore omitte"
        ],
        "pages_sent": 46,
        "cost_usd": 0.1809,
        "at": "2026-11-10T10:31:33"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps785-q1",
        "pages": 46,
        "sha256": "8d1b76473f2a1cce",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps78511qkvurq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.9,
          6.5,
          2.32
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d85360b3e2359b76856869bda844e512876c2223b4cf36e7a7e1581f227bec7e",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps78511qkvurq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.9,
          6.5,
          2.32
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b7bd104b863beba03dfa4f25b64b3c3fa4213f23868e945a6ed44a48bdbd4fdb",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}