main
Ray
Publish 0.1.0
1d1a871
TPS78415QDBVRQ1
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS78415QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin, with a VIN range of 1.65 V to 6.0 V; place the input capacitor as close to the device input as possible. |
| 2 | GND | power_in | Ground pin that must be connected to ground on the board. |
| 3 | EN | input | Active-high enable pin with a VEN range of 0 to 6 V; do not float this pin, and connect it to IN if the enable function is not used. |
| 4 | NC | unconnected | No-connect pin that is not internally connected; connect to ground for best thermal performance or leave floating. |
| 5 | OUT | power_out | Regulated output pin requiring at least 0.47 µF effective capacitance to ground for stability, with 1 µF or larger ceramic recommended for best transient response. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ground current, IOUT = 0 mA, TJ = 25 °C | IGND | 15 | 25 | 30 | µA | IOUT = 0 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; TJ = 25°C | 7 |
| Ground current, IOUT = 0 mA, -40°C ≤ TJ ≤ 85°C | IGND | 33 | µA | IOUT = 0 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C | 7 | ||
| Ground current, IOUT = 0 mA, -40°C ≤ TJ ≤ 150°C | IGND | 40 | µA | IOUT = 0 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C | 7 | ||
| Ground current, IOUT = 500 µA, TJ = 25 °C | IGND | 33 | 43 | µA | IOUT = 500 µA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; TJ = 25°C | 7 | |
| Ground current, IOUT = 500 µA, -40°C ≤ TJ ≤ 85°C | IGND | 45 | µA | IOUT = 500 µA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C | 7 | ||
| Ground current, IOUT = 500 µA, -40°C ≤ TJ ≤ 150°C | IGND | 48 | µA | IOUT = 500 µA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C | 7 | ||
| Output voltage accuracy, TJ = 25 °C | VOUT | -0.5 | 0.5 | % | 1 mA ≤ IOUT ≤ 300 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; TJ = 25°C | 7 | |
| Output voltage accuracy, -40°C ≤ TJ ≤ 85°C | VOUT | -1 | 1 | % | 1 mA ≤ IOUT ≤ 300 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C | 7 | |
| Output voltage accuracy, -40°C ≤ TJ ≤ 150°C | VOUT | -1.7 | 1.7 | % | 1 mA ≤ IOUT ≤ 300 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C | 7 | |
| Load regulation, -40°C ≤ TJ ≤ 85°C | VOUT | -5 | 5 | mV | 0.1 mA ≤ IOUT ≤ 300 mA; -40°C ≤ TJ ≤ 85°C | 7 | |
| Load regulation, -40°C ≤ TJ ≤ 150°C | VOUT | -5 | 10 | mV | 0.1 mA ≤ IOUT ≤ 300 mA; -40°C ≤ TJ ≤ 150°C | 7 | |
| Shutdown current, TJ = 25 °C | ISHDN | 0.01 | 0.05 | µA | VEN ≤ 0.3 V; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; TJ = 25°C | 7 | |
| Shutdown current, -40°C ≤ TJ ≤ 85°C | ISHDN | 0.25 | µA | VEN ≤ 0.3 V; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C | 7 | ||
| Shutdown current, -40°C ≤ TJ ≤ 150°C | ISHDN | 3 | µA | VEN ≤ 0.3 V; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C | 7 | ||
| Output current limit | ICL | 320 | 420 | mA | VIN = VOUT(nom) + 1 V; VOUT = 0.9 x VOUT(nom) | 7 | |
| Dropout voltage, 1.5 V ≤ VOUT < 1.8 V | VDO | 175 | mV | IOUT = 300 mA; VOUT = 0.95 x VOUT(nom); 1.5 V ≤ VOUT < 1.8 V | 7 | ||
| UVLO threshold, VIN rising | VUVLO | 1.32 | 1.42 | 1.6 | V | VIN rising | 7 |
| UVLO threshold, VIN falling | VUVLO | 1.17 | 1.29 | 1.42 | V | VIN falling | 7 |
| Start-up time | tSTR | 280 | 500 | 780 | µs | From EN low-to-high transition to VOUT = VOUT(nom) x 95% | 7 |
| EN pin logic high voltage | VEN(HI) | 0.85 | V | 8 | |||
| EN pin logic low voltage | VEN(LOW) | 0.425 | V | 8 | |||
| Enable pin current | IEN | 10 | nA | VIN = VEN = 6.0 V | 8 | ||
| Input voltage | VIN | 1.65 | 6 | V | 6 | ||
| Output voltage, fixed option | VOUT | 0.65 | 5 | V | Fixed output | 6 | |
| Input capacitor | CIN | 0.1 | 1 | µF | 6 | ||
| Output capacitor | COUT | 1 | 200 | µF | 6 | ||
| Output capacitor ESR | COUT,ESR | 0.001 | 1 | Ω | 6 | ||
| Output current | IOUT | 0 | 300 | mA | 6 | ||
| Enable voltage | VEN | 0 | 6 | V | 6 | ||
| Junction temperature (operating) | TJ | -40 | 150 | °C | 6 | ||
| Supply voltage | VIN | -0.3 | 6.5 | V | 5 | ||
| Enable voltage | VEN | -0.3 | 6.5 | V | 5 | ||
| Output voltage | VOUT | -0.3 | V | VIN + 0.3 V or 6.5 V, whichever is smaller | 5 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 170.8 | °C/W | DBV (SOT-23) 5-pin; footnote 3: 1s0p JEDEC 51-3 value 277.3 °C/W | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 93.1 | °C/W | DBV (SOT-23) 5-pin | 6 | ||
| Junction-to-board thermal resistance | RθJB | 10.2 | °C/W | DBV (SOT-23) 5-pin | 6 | ||
| Junction-to-top characterization parameter | ψJT | 17.5 | °C/W | DBV (SOT-23) 5-pin | 6 | ||
| Junction-to-board characterization parameter | ψJB | 40 | °C/W | DBV (SOT-23) 5-pin | 6 | ||
| Short-circuit current limit, VOUT = 0 V | ISC | 162.5 | mA | VOUT = 0 V | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | copper ground plane on the layer directly underneath the LDO circuitry and FB pin to minimize any undesirable | 37 |
CAD (KiCad official)
- Symbol:
TPS78415QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps78415qdbvrq1-etched.step/tps78415qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps78415qdbvrq1.step/tps78415qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
0c6f0cf1abccc5c1, retrieved 2026-11-11, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS78415QDBVRQ1
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS78415QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin, with a VIN range of 1.65 V to 6.0 V; place the input capacitor as close to the device input as possible. |
| 2 | GND | power_in | Ground pin that must be connected to ground on the board. |
| 3 | EN | input | Active-high enable pin with a VEN range of 0 to 6 V; do not float this pin, and connect it to IN if the enable function is not used. |
| 4 | NC | unconnected | No-connect pin that is not internally connected; connect to ground for best thermal performance or leave floating. |
| 5 | OUT | power_out | Regulated output pin requiring at least 0.47 µF effective capacitance to ground for stability, with 1 µF or larger ceramic recommended for best transient response. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ground current, IOUT = 0 mA, TJ = 25 °C | IGND | 15 | 25 | 30 | µA | IOUT = 0 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; TJ = 25°C | 7 |
| Ground current, IOUT = 0 mA, -40°C ≤ TJ ≤ 85°C | IGND | | | 33 | µA | IOUT = 0 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C | 7 |
| Ground current, IOUT = 0 mA, -40°C ≤ TJ ≤ 150°C | IGND | | | 40 | µA | IOUT = 0 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C | 7 |
| Ground current, IOUT = 500 µA, TJ = 25 °C | IGND | | 33 | 43 | µA | IOUT = 500 µA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; TJ = 25°C | 7 |
| Ground current, IOUT = 500 µA, -40°C ≤ TJ ≤ 85°C | IGND | | | 45 | µA | IOUT = 500 µA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C | 7 |
| Ground current, IOUT = 500 µA, -40°C ≤ TJ ≤ 150°C | IGND | | | 48 | µA | IOUT = 500 µA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C | 7 |
| Output voltage accuracy, TJ = 25 °C | VOUT | -0.5 | | 0.5 | % | 1 mA ≤ IOUT ≤ 300 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; TJ = 25°C | 7 |
| Output voltage accuracy, -40°C ≤ TJ ≤ 85°C | VOUT | -1 | | 1 | % | 1 mA ≤ IOUT ≤ 300 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C | 7 |
| Output voltage accuracy, -40°C ≤ TJ ≤ 150°C | VOUT | -1.7 | | 1.7 | % | 1 mA ≤ IOUT ≤ 300 mA; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C | 7 |
| Load regulation, -40°C ≤ TJ ≤ 85°C | VOUT | -5 | | 5 | mV | 0.1 mA ≤ IOUT ≤ 300 mA; -40°C ≤ TJ ≤ 85°C | 7 |
| Load regulation, -40°C ≤ TJ ≤ 150°C | VOUT | -5 | | 10 | mV | 0.1 mA ≤ IOUT ≤ 300 mA; -40°C ≤ TJ ≤ 150°C | 7 |
| Shutdown current, TJ = 25 °C | ISHDN | | 0.01 | 0.05 | µA | VEN ≤ 0.3 V; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; TJ = 25°C | 7 |
| Shutdown current, -40°C ≤ TJ ≤ 85°C | ISHDN | | | 0.25 | µA | VEN ≤ 0.3 V; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C | 7 |
| Shutdown current, -40°C ≤ TJ ≤ 150°C | ISHDN | | | 3 | µA | VEN ≤ 0.3 V; VOUT(nom) + 0.5 V or 1.65 V (whichever greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C | 7 |
| Output current limit | ICL | 320 | 420 | | mA | VIN = VOUT(nom) + 1 V; VOUT = 0.9 x VOUT(nom) | 7 |
| Dropout voltage, 1.5 V ≤ VOUT < 1.8 V | VDO | | | 175 | mV | IOUT = 300 mA; VOUT = 0.95 x VOUT(nom); 1.5 V ≤ VOUT < 1.8 V | 7 |
| UVLO threshold, VIN rising | VUVLO | 1.32 | 1.42 | 1.6 | V | VIN rising | 7 |
| UVLO threshold, VIN falling | VUVLO | 1.17 | 1.29 | 1.42 | V | VIN falling | 7 |
| Start-up time | tSTR | 280 | 500 | 780 | µs | From EN low-to-high transition to VOUT = VOUT(nom) x 95% | 7 |
| EN pin logic high voltage | VEN(HI) | 0.85 | | | V | | 8 |
| EN pin logic low voltage | VEN(LOW) | | | 0.425 | V | | 8 |
| Enable pin current | IEN | | | 10 | nA | VIN = VEN = 6.0 V | 8 |
| Input voltage | VIN | 1.65 | | 6 | V | | 6 |
| Output voltage, fixed option | VOUT | 0.65 | | 5 | V | Fixed output | 6 |
| Input capacitor | CIN | 0.1 | | 1 | µF | | 6 |
| Output capacitor | COUT | 1 | | 200 | µF | | 6 |
| Output capacitor ESR | COUT,ESR | 0.001 | | 1 | Ω | | 6 |
| Output current | IOUT | 0 | | 300 | mA | | 6 |
| Enable voltage | VEN | 0 | | 6 | V | | 6 |
| Junction temperature (operating) | TJ | -40 | | 150 | °C | | 6 |
| Supply voltage | VIN | -0.3 | | 6.5 | V | | 5 |
| Enable voltage | VEN | -0.3 | | 6.5 | V | | 5 |
| Output voltage | VOUT | -0.3 | | | V | VIN + 0.3 V or 6.5 V, whichever is smaller | 5 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 170.8 | | °C/W | DBV (SOT-23) 5-pin; footnote 3: 1s0p JEDEC 51-3 value 277.3 °C/W | 6 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 93.1 | | °C/W | DBV (SOT-23) 5-pin | 6 |
| Junction-to-board thermal resistance | RθJB | | 10.2 | | °C/W | DBV (SOT-23) 5-pin | 6 |
| Junction-to-top characterization parameter | ψJT | | 17.5 | | °C/W | DBV (SOT-23) 5-pin | 6 |
| Junction-to-board characterization parameter | ψJB | | 40 | | °C/W | DBV (SOT-23) 5-pin | 6 |
| Short-circuit current limit, VOUT = 0 V | ISC | | 162.5 | | mA | VOUT = 0 V | 7 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | copper ground plane on the layer directly underneath the LDO circuitry and FB pin to minimize any undesirable | 37 |
## CAD (KiCad official)
- Symbol: `TPS78415QDBVRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tps78415qdbvrq1-etched.step` / `tps78415qdbvrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps78415qdbvrq1.step` / `tps78415qdbvrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps784-q1) (56 pp, sha256 `0c6f0cf1abccc5c1`, retrieved 2026-11-11, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps78415qdbvrq1-datasheet.pdf)