main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps78218ddcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps78218ddcr: viewers · Ray
package.json tps78218ddcr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps78218ddcr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps78218ddcr · Ray
tps78218ddcr-etched.fit.json tps78218ddcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps78218ddcr-etched.glb tps78218ddcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps78218ddcr-etched.step tps78218ddcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps78218ddcr.glb Publish 0.1.0 · Ray
tps78218ddcr.kicad_mod Publish 0.1.0 · Ray
tps78218ddcr.kicad_sym Publish 0.1.0 · Ray
tps78218ddcr.lbr Publish 0.1.0 · Ray
tps78218ddcr.step Publish 0.1.0 · Ray

TPS78218DDCR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-5

TPS78218DDCR from Texas Instruments, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Input pin. For stable operation, place a small, 0.1-µF capacitor from this pin to ground; typical input capacitor = 1.0 µF. Tie back both input and output capacitor grounds to the IC ground, with no significant impedance between them.
2 GND power_in Ground pin. Tie all ground pins to ground for proper operation.
3 EN input Enable pin. Drive this pin over 1.2 V to turn on the regulator. Drive this pin below 0.4 V to put the regulator into shutdown mode, reducing operating current to 18 nA typical.
4 GND power_in Ground pin. Tie all ground pins to ground for proper operation.
5 OUT output Regulated output voltage pin. A small (1-μF) ceramic capacitor is needed from this pin to ground to assure stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TPS78218DDCR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps78218ddcr-etched.step / tps78218ddcr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps78218ddcr.step / tps78218ddcr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 6d5284ff468719a7, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF