main
Ray
tps780300250drvr: specified limits as data (metadata.characteristics, 28 rows from the datasheet)
1ab6642
TPS780300250DRVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)
TPS780300250DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulated output voltage pin; a 1-μF ceramic capacitor from this pin to ground is required to assure stability. |
| 2 | N/C | unconnected | Not connected. |
| 3 | VSET | input | Voltage select pin for fixed voltage versions; drive below 0.4 V to select preset output voltage high or drive over 1.2 V to select preset output voltage low. |
| 4 | EN | input | Enable pin; drive over 1.2 V to turn on the regulator or drive below 0.4 V to put the regulator into shutdown mode, reducing operating current to 18 nA typical. |
| 5 | GND | power_in | Ground pin; tie all ground pins to ground for proper operation. |
| 6 | IN | input | Input pin; a 0.1-μF to 1.0-μF low equivalent series resistance capacitor is required from this pin to ground to assure stability, with typical input capacitor 1.0 μF. |
| 7 | Thermal Pad | power_in | Exposed thermal pad (SON package only); the package thermal pad must be soldered to the printed circuit board for thermal and mechanical performance and connected to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.2 | 5.5 | V | 5 | ||
| DC output accuracy (nominal) | VOUT | -2 | 1 | 2 | % | Nominal TJ = 25°C, VSET = high/low | 5 |
| DC output accuracy (over VIN, IOUT, temperature) | VOUT | -3 | 2 | 3 | % | Over VIN, IOUT, temperature; VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, 0 mA ≤ IOUT ≤ 150 mA, VSET = high/low | 5 |
| Line regulation | ΔVOUT(ΔVIN) | -1 | 1 | % | VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 5 mA | 5 | |
| Load regulation | ΔVOUT(ΔIOUT) | -2 | 2 | % | 0 mA ≤ IOUT ≤ 150 mA | 5 | |
| Dropout voltage | VDO | 250 | mV | VIN = 95% VOUT(nom), IOUT = 150 mA | 5 | ||
| VSET/EN high input threshold | VHI | 1.2 | V | VSET high (output VOUT(LO) selected) or EN high (enabled) | 5 | ||
| VSET/EN low input threshold | VLO | 0 | 0.4 | V | VSET low (output VOUT(HI) selected) or EN low (disabled) | 5 | |
| Output current limit | ICL | 150 | 230 | 400 | mA | VOUT = 0.90 × VOUT(nom) | 5 |
| Ground pin current | IGND | 420 | 800 | nA | IOUT = 0 mA (max 800 nA up to 100°C per footnote 6) | 5 | |
| Shutdown current (IGND) | ISHDN | 18 | 130 | nA | VEN ≤ 0.4 V, 2.2 V ≤ VIN < 5.5 V, TJ = –40°C to 100°C | 5 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Input voltage | VIN | 2.2 | 5.5 | V | 4 | ||
| Output voltage | VOUT | 1.8 | 4.2 | V | 4 | ||
| Enable voltage | VEN | 0 | V | Maximum is VIN | 4 | ||
| Output current | IOUT | 0 | 150 | mA | 4 | ||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Input voltage | VIN | -0.3 | 6 | V | 4 | ||
| Enable and VSET voltage | VEN, VVSET | -0.3 | V | Maximum is VIN + 0.3 V or +6.0 V, whichever is less | 4 | ||
| Output voltage | VOUT | -0.3 | V | Maximum is VIN + 0.3 V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 65.9 | °C/W | DRV (6-pin WSON) package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 87.3 | °C/W | DRV (6-pin WSON) package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 35.4 | °C/W | DRV (6-pin WSON) package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 1.7 | °C/W | DRV (6-pin WSON) package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 35.8 | °C/W | DRV (6-pin WSON) package | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 6.1 | °C/W | DRV (6-pin WSON) package | 4 |
CAD (KiCad official)
- Symbol:
TPS780300250DRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps780300250drvr-etched.step/tps780300250drvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps780300250drvr.step/tps780300250drvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
57e586ec3cc7155d, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS780300250DRVR
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)
TPS780300250DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulated output voltage pin; a 1-μF ceramic capacitor from this pin to ground is required to assure stability. |
| 2 | N/C | unconnected | Not connected. |
| 3 | VSET | input | Voltage select pin for fixed voltage versions; drive below 0.4 V to select preset output voltage high or drive over 1.2 V to select preset output voltage low. |
| 4 | EN | input | Enable pin; drive over 1.2 V to turn on the regulator or drive below 0.4 V to put the regulator into shutdown mode, reducing operating current to 18 nA typical. |
| 5 | GND | power_in | Ground pin; tie all ground pins to ground for proper operation. |
| 6 | IN | input | Input pin; a 0.1-μF to 1.0-μF low equivalent series resistance capacitor is required from this pin to ground to assure stability, with typical input capacitor 1.0 μF. |
| 7 | Thermal Pad | power_in | Exposed thermal pad (SON package only); the package thermal pad must be soldered to the printed circuit board for thermal and mechanical performance and connected to ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.2 | | 5.5 | V | | 5 |
| DC output accuracy (nominal) | VOUT | -2 | 1 | 2 | % | Nominal TJ = 25°C, VSET = high/low | 5 |
| DC output accuracy (over VIN, IOUT, temperature) | VOUT | -3 | 2 | 3 | % | Over VIN, IOUT, temperature; VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, 0 mA ≤ IOUT ≤ 150 mA, VSET = high/low | 5 |
| Line regulation | ΔVOUT(ΔVIN) | -1 | | 1 | % | VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 5 mA | 5 |
| Load regulation | ΔVOUT(ΔIOUT) | -2 | | 2 | % | 0 mA ≤ IOUT ≤ 150 mA | 5 |
| Dropout voltage | VDO | | | 250 | mV | VIN = 95% VOUT(nom), IOUT = 150 mA | 5 |
| VSET/EN high input threshold | VHI | 1.2 | | | V | VSET high (output VOUT(LO) selected) or EN high (enabled) | 5 |
| VSET/EN low input threshold | VLO | 0 | | 0.4 | V | VSET low (output VOUT(HI) selected) or EN low (disabled) | 5 |
| Output current limit | ICL | 150 | 230 | 400 | mA | VOUT = 0.90 × VOUT(nom) | 5 |
| Ground pin current | IGND | | 420 | 800 | nA | IOUT = 0 mA (max 800 nA up to 100°C per footnote 6) | 5 |
| Shutdown current (IGND) | ISHDN | | 18 | 130 | nA | VEN ≤ 0.4 V, 2.2 V ≤ VIN < 5.5 V, TJ = –40°C to 100°C | 5 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 5 |
| Input voltage | VIN | 2.2 | | 5.5 | V | | 4 |
| Output voltage | VOUT | 1.8 | | 4.2 | V | | 4 |
| Enable voltage | VEN | 0 | | | V | Maximum is VIN | 4 |
| Output current | IOUT | 0 | | 150 | mA | | 4 |
| Junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Input voltage | VIN | -0.3 | | 6 | V | | 4 |
| Enable and VSET voltage | VEN, VVSET | -0.3 | | | V | Maximum is VIN + 0.3 V or +6.0 V, whichever is less | 4 |
| Output voltage | VOUT | -0.3 | | | V | Maximum is VIN + 0.3 V | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 65.9 | | °C/W | DRV (6-pin WSON) package | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 87.3 | | °C/W | DRV (6-pin WSON) package | 4 |
| Junction-to-board thermal resistance | RθJB | | 35.4 | | °C/W | DRV (6-pin WSON) package | 4 |
| Junction-to-top characterization parameter | ψJT | | 1.7 | | °C/W | DRV (6-pin WSON) package | 4 |
| Junction-to-board characterization parameter | ψJB | | 35.8 | | °C/W | DRV (6-pin WSON) package | 4 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 6.1 | | °C/W | DRV (6-pin WSON) package | 4 |
## CAD (KiCad official)
- Symbol: `TPS780300250DRVR`
- Footprint: `Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm`
- 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `tps780300250drvr-etched.step` / `tps780300250drvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps780300250drvr.step` / `tps780300250drvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps780) (43 pp, sha256 `57e586ec3cc7155d`, retrieved 2026-09-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps780300250drvr-datasheet.pdf)