Generated by kicad-footprint-generator · KiCad file format 20260206
TPS77715DR
Texas Instruments · Linear Voltage Regulators (LDO) · SOIC-8
TPS77715DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground pin for the SOIC package. |
| 2 | EN | input | Enable input; applying a TTL high signal shuts down the regulator and reduces quiescent current, and EN should be tied to ground if shutdown is not used. |
| 3 | IN | power_in | Input voltage pin; pins 3 and 4 are both IN and are connected together on the package. |
| 4 | IN | power_in | Input voltage pin; pins 3 and 4 are both IN and are connected together on the package. |
| 5 | OUT | power_out | Regulated output voltage; pins 5 and 6 are both OUT and require an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω to GND. |
| 6 | OUT | power_out | Regulated output voltage; pins 5 and 6 are both OUT and require an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω to GND. |
| 7 | FB/NC | unconnected | Feedback input for the adjustable version; no connect for fixed-output options such as TPS77715. |
| 8 | RESET | output | Open-drain RESET output that initiates a reset in microcomputer or microprocessor systems on an undervoltage condition of the regulated output, with a 200 ms delay. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VO | 1.47 | 1.53 | V | TJ = −40°C to 125°C, 2.7 V < VIN < 10 V, 10 µA to 750 mA load | 7 | |
| Output current limit | 1.2 | 1.7 | 2 | A | VO = 0 V | 7 | |
| Trip threshold voltage | 92 | 98 | %VO | VO decreasing | 7 | ||
| Output low voltage (RESET) | 0.15 | 0.4 | V | VI = 2.7 V, IO(RESET) = 1 mA | 7 | ||
| Quiescent current (GND current) | 125 | µA | IO = 750 mA | 7 | |||
| Minimum input voltage for valid RESET | 1.1 | V | IO(RESET) = 300 µA | 7 | |||
| Load regulation | 3 | mV | 7 | ||||
| Standby current | 1 | µA | EN = VI, TJ = 25°C, 2.7 V < VI < 10 V | 7 | |||
| Standby current | 10 | µA | EN = VI, 2.7 V < VI < 10 V | 7 | |||
| Leakage current (RESET) | 1 | µA | V(RESET) = 5 V | 7 | |||
| Input current (EN) | -1 | 0 | 1 | µA | EN = 0 V | 8 | |
| Input current (EN) | -1 | 1 | µA | EN = VI | 8 | ||
| High level enable input voltage | 1.7 | V | 7 | ||||
| Low level enable input voltage | 0.9 | V | 7 | ||||
| Input voltage | VI | 2.7 | 10 | V | 6 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 6 | ||
| Output capacitor minimum recommended capacitance | Co | 10 | µF | 15 | |||
| Output capacitor ESR | ESR | 50 | mΩ | 15 | |||
| Output capacitor ESR | ESR | 1.5 | Ω | 15 | |||
| Input voltage | VI | -0.3 | 13.5 | V | 6 | ||
| Voltage range at EN | VEN | -0.3 | 16.5 | V | 6 | ||
| Maximum RESET voltage (TPS777xx) | 16.5 | V | 6 | ||||
| Output voltage (OUT, FB) | VO | 7 | V | 6 | |||
| Operating junction temperature range | TJ | -40 | 125 | °C | 6 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 6 | ||
| ESD rating, HBM | 2 | kV | HBM | 6 | |||
| Derating factor above TA = 25°C (D package) | 5.68 | mW/°C | D package, 0 CFM | 6 |
CAD (KiCad official)
- Symbol:
TPS77715DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps77715dr-etched.step/tps77715dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps77715dr.step/tps77715dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
3e029275f39c3e72, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).