component
TPS77618DR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS77618DR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
TPS77618DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; the datasheet lists it as the device ground and the PowerPAD/tab should be soldered to the ground plane for heat sinking. |
| 2 | EN | input | Negative-polarity enable input; applying a TTL high shuts the regulator down, and EN should be tied to ground if shutdown is not used, with an absolute maximum of +16.5 V. |
| 3 | IN | power_in | Input voltage pin; the absolute maximum input voltage range is -0.3 V to +13.5 V. |
| 4 | IN | power_in | Input voltage pin (second IN pin, internally connected to pin 3); the absolute maximum input voltage range is -0.3 V to +13.5 V. |
| 5 | OUT | power_out | Regulated output voltage; the output requires a capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω connected between OUT and GND. |
| 6 | OUT | power_out | Regulated output voltage (second OUT pin, internally connected to pin 5); the output requires a capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω connected between OUT and GND. |
| 7 | FB/NC | unconnected | Feedback input for the adjustable version only; on the fixed-voltage version (TPS77618) this pin is not internally connected. |
| 8 | RESET/PG | output | On TPS776xx devices this is an open-drain power-good (PG) output that needs a pullup resistor, with a maximum voltage of 16.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS77618DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps77618dr-etched.step/tps77618dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps77618dr.step/tps77618dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
8829e2a477a2c896, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).