component
TPS77433DGKR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS77433DGKR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSSOP-8
TPS77433DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB/SENSE | input | Feedback input for the adjustable device and sense input for the fixed-output options; on fixed options it must be connected to the regulator output as short as possible and kept away from noise pickup. |
| 2 | PG | output | Open-drain, active-high power-good output that goes high-impedance when Vout reaches 82% of the regulated voltage and low-impedance when Vout falls below 82%, and requires a pullup resistor. |
| 3 | EN | input | Enable input: a logic low enables the regulator and a logic high puts the device into shutdown. |
| 4 | GND | power_in | Regulator ground (signal ground, also the return for the output capacitor). |
| 5 | IN | power_in | Regulator input voltage pin; the datasheet pages provided do not state the input voltage limits for this pin. |
| 6 | IN | power_in | Regulator input voltage pin (second input pin, internally tied to pin 5); the datasheet pages provided do not state the input voltage limits for this pin. |
| 7 | OUT | power_out | Regulated output voltage; requires an output capacitor to GND of at least 1 µF with ESR within the stability region of Figures 19 and 21, or at least 10 µF with ESR within Figures 18 and 20. |
| 8 | OUT | power_out | Regulated output voltage (second output pin, internally tied to pin 7); requires the same output capacitor as pin 7 for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS77433DGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tps77433dgkr-etched.step/tps77433dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps77433dgkr.step/tps77433dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
ea56bf7919f0accf, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).