TPS77301DGKR

by adom

Texas Instruments Linear Voltage Regulators (LDO), VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

← Commit history

Publish 0.1.0

Ray ·99448e6553 ·2h ago

15 files changed +4188

README.md+83 docs/hero.pngdocs/tps77301dgkr-datasheet.pdfpackage.json+219 page.json+225 tps77301dgkr-etched.glbtps77301dgkr-hero.glbtps77301dgkr-hero.overlay.json+260 tps77301dgkr.glbtps77301dgkr.kicad_mod+198 tps77301dgkr.kicad_sym+45 tps77301dgkr.lbr+130 tps77301dgkr.step+3026 viewers/footprint.html+1 viewers/symbol.html+1

README.mdadded+83

@@ -0,0 +1,83 @@+# TPS77301DGKR++**Texas Instruments** · Linear Voltage Regulators (LDO) · VSSOP-8++TPS77301DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FB/SENSE | input | Feedback input for the adjustable device, which must connect to an external feedback resistor divider, and sense input for fixed options, which must connect to the regulator output as short as possible. |+| 2 | RESET | output | Open-drain, active-low reset output that goes high-impedance after a 220-ms delay once OUT reaches 95% of its regulated voltage and requires a pullup resistor. |+| 3 | EN | input | Enable input where a logic low enables the regulator and a logic high shuts it down. |+| 4 | GND | power_in | Regulator ground (signal ground for the output capacitor return). |+| 5 | IN | power_in | Input voltage supply to the PMOS pass element; the datasheet pages provided do not state an input voltage limit for this pin. |+| 6 | IN | power_in | Input voltage supply to the PMOS pass element; the datasheet pages provided do not state an input voltage limit for this pin. |+| 7 | OUT | power_out | Regulated output voltage that requires an output capacitor to GND of at least 1 µF with ESR within Figures 19 and 21, or at least 10 µF for low-ESR capacitors meeting Figures 18 and 20. |+| 8 | OUT | power_out | Regulated output voltage that requires an output capacitor to GND of at least 1 µF with ESR within Figures 19 and 21, or at least 10 µF for low-ESR capacitors meeting Figures 18 and 20. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8 |+| Category | Power Supply Chip |+| Pins | 8 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Adjustable output voltage accuracy (multiplier of VO) | VO | 0.98 |  | 1.02 | VO (multiplier) | 1.5 V ≤ VO ≤ 5.5 V | 7 |+| Output voltage line regulation (ΔVO/VO) |  |  |  | 0.05 | %/V | VO + 1 V < VI ≤ 10 V | 7 |+| Quiescent current (GND current) |  |  |  | 125 | µA |  | 7 |+| Standby current |  |  |  | 3 | µA | EN = VI | 8 |+| FB input current |  |  |  | 1 | µA | FB = 1.5 V | 8 |+| High level enable input voltage |  | 2 |  |  | V |  | 8 |+| Enable input current |  | -1 |  | 1 | µA |  | 8 |+| RESET trip threshold voltage |  | 92 |  | 98 | %VO | VO decreasing | 8 |+| Minimum input voltage for valid RESET |  |  |  | 1.1 | V | I(RESET) = 300 µA | 8 |+| RESET output low voltage |  |  | 0.15 | 0.4 | V | VI = 2.7 V, I(RESET) = 1 mA | 8 |+| RESET leakage current |  |  |  | 1 | µA | V(RESET) = 5 V | 8 |+| RESET hysteresis voltage |  |  | 0.5 |  | %VO | Measured at VO | 8 |+| Load regulation |  |  | 1 |  | mV | TJ = 25°C | 7 |+| Output voltage line regulation (ΔVO/VO) |  |  | 0.005 |  | %/V | VO + 1 V < VI ≤ 10 V, TJ = 25°C | 7 |+| Quiescent current (GND current) |  |  | 92 |  | µA | TJ = 25°C | 7 |+| Peak output current |  |  | 400 |  | mA | 2 ms pulse width, 50% duty cycle | 7 |+| Thermal shutdown junction temperature |  |  | 144 |  | °C |  | 7 |+| Standby current |  |  | 1 |  | µA | EN = VI, TJ = 25°C | 7 |+| RESET time-out delay |  |  | 220 |  | ms |  | 8 |+| Input voltage | VI | 2.7 |  | 10 | V |  | 6 |+| Output voltage range | VO | 1.5 |  | 5.5 | V |  | 6 |+| Output current | IO | 0 |  | 250 | mA | see Note 1 | 6 |+| Operating virtual junction temperature | TJ | -40 |  | 125 | °C | see Note 1 | 6 |+| Input voltage range | VI | -0.3 |  | 13.5 | V |  | 6 |+| Voltage range at EN |  | -0.3 |  | 16.5 | V |  | 6 |+| Maximum RESET voltage (TPS773xx) |  |  |  | 16.5 | V |  | 6 |+| Output voltage (OUT, FB) | VO |  |  | 5.5 | V |  | 6 |+| Operating virtual junction temperature range | TJ | -40 |  | 125 | °C |  | 6 |+| Storage temperature range | Tstg | -65 |  | 150 | °C |  | 6 |+| ESD rating, HBM |  |  |  | 2 | kV | HBM | 6 |+| Junction-to-ambient thermal resistance (DGK) | θJA |  | 266.2 |  | °C/W | 0 CFM air flow | 6 |+| Junction-to-case thermal resistance (DGK) | θJC |  | 3.84 |  | °C/W | 0 CFM air flow | 6 |++## CAD (KiCad official)++- Symbol: `TPS77301DGKR`+- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`+- 3D model: VSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `tps77301dgkr-etched.step` / `tps77301dgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps77301dgkr.step` / `tps77301dgkr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps773.pdf) (26 pp, sha256 `e831bc9de40e35b4`, retrieved 2026-11-06, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps77301dgkr-datasheet.pdf)

docs/hero.pngadded

⋯ 1 unchanged line ⋯

docs/tps77301dgkr-datasheet.pdfadded

⋯ 1 unchanged line ⋯

package.jsonadded+219

@@ -0,0 +1,219 @@+{+  "slug": "tps77301dgkr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Linear Voltage Regulators (LDO), VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power supply chip",+    "tps77301dgkr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps77301dgkr.kicad_sym",+    "tps77301dgkr.kicad_mod",+    "tps77301dgkr.glb",+    "tps77301dgkr.step",+    "tps77301dgkr.lbr",+    "docs/hero.png",+    "docs/tps77301dgkr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "tps77301dgkr-hero.glb",+    "tps77301dgkr-hero.overlay.json",+    "tps77301dgkr-etched.glb"+  ],+  "component": {+    "mpn": "TPS77301DGKR",+    "manufacturer": "Texas Instruments",+    "package": "VSSOP-8",+    "pin_count": 8,+    "category": "Power Supply Chip",+    "subcategory": "Linear Voltage Regulators (LDO)",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps773.pdf",+    "parts": {+      "symbol": "tps77301dgkr.kicad_sym",+      "footprint": "tps77301dgkr.kicad_mod",+      "model_3d": "tps77301dgkr-hero.glb",+      "model_3d_plain": "tps77301dgkr-etched.glb",+      "model_3d_step": "tps77301dgkr-etched.step",+      "model_3d_step_plain": "tps77301dgkr.step",+      "lbr": "tps77301dgkr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2863174",+      "digikey": "296-50560-2-ND",+      "mouser": "595-TPS77301DGKR"+    },+    "distributor_check": {+      "checked_at": "2026-11-06T00:47:06Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-50560-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TPS77301DGKR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "FB/SENSE",+        "type": "input",+        "description": "Feedback input for the adjustable device, which must connect to an external feedback resistor divider, and sense input for fixed options, which must connect to the regulator output as short as possible."+      },+      {+        "number": "2",+        "name": "RESET",+        "type": "output",+        "description": "Open-drain, active-low reset output that goes high-impedance after a 220-ms delay once OUT reaches 95% of its regulated voltage and requires a pullup resistor."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Enable input where a logic low enables the regulator and a logic high shuts it down."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Regulator ground (signal ground for the output capacitor return)."+      },+      {+        "number": "5",+        "name": "IN",+        "type": "power_in",+        "description": "Input voltage supply to the PMOS pass element; the datasheet pages provided do not state an input voltage limit for this pin."+      },+      {+        "number": "6",+        "name": "IN",+        "type": "power_in",+        "description": "Input voltage supply to the PMOS pass element; the datasheet pages provided do not state an input voltage limit for this pin."+      },+      {+        "number": "7",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output voltage that requires an output capacitor to GND of at least 1 µF with ESR within Figures 19 and 21, or at least 10 µF for low-ESR capacitors meeting Figures 18 and 20."+      },+      {+        "number": "8",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output voltage that requires an output capacitor to GND of at least 1 µF with ESR within Figures 19 and 21, or at least 10 µF for low-ESR capacitors meeting Figures 18 and 20."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The pin table on page 4 covers the TPS773xx DGK package, which includes TPS77301DGKR (adjustable, 1.; The datasheet labels IN as 'I' and OUT as 'O'. I mapped them to KiCad power_in and power_out because; The datasheet shows the DGK package as MSOP, while the TI package addendum lists it as VSSOP (DGK), "+        ],+        "pages_sent": 12,+        "cost_usd": 0.0648,+        "at": "2026-11-06T00:46:39"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps773.pdf",+        "pages": 26,+        "sha256": "e831bc9de40e35b4",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "tps77301dgkr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.9,+          3.0,+          1.35+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "0af17c38f7022ea10ff245f82773c9b00d4163a407490c6b2d91869a0861df56",+        "checked": "2026-11-06",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps77301dgkr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.9,+          3.0,+          1.35+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "66939dbe678db69b9235adf711b52230f961c323dbd9c09f82a2926c71566591",+        "checked": "2026-11-06",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ],+    "package_dims": {+      "package_code": "DGK",+      "E1": {+        "nom_mm": 3.0,+        "range_mm": null+      },+      "E": {+        "nom_mm": 4.9,+        "range_mm": null+      },+      "e": {+        "nom_mm": 0.65,+        "range_mm": null+      },+      "source": "TI package designator DGK (no drawing in the datasheet)",+      "model_check": {+        "file": "tps77301dgkr.step",+        "verdict": "SKIP",+        "reasons": [+          "the datasheet dimensions give no height or body size to compare"+        ],+        "by": "factory/package_fit.py"+      }+    }+  }+}

page.jsonadded+225

@@ -0,0 +1,225 @@+{+  "slug": "tps77301dgkr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Linear Voltage Regulators (LDO), VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power supply chip",+    "tps77301dgkr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps77301dgkr.kicad_sym",+    "tps77301dgkr.kicad_mod",+    "tps77301dgkr.glb",+    "tps77301dgkr.step",+    "tps77301dgkr.lbr",+    "docs/hero.png",+    "docs/tps77301dgkr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "tps77301dgkr-hero.glb",+    "tps77301dgkr-hero.overlay.json",+    "tps77301dgkr-etched.glb"+  ],+  "component": {+    "mpn": "TPS77301DGKR",+    "manufacturer": "Texas Instruments",+    "package": "VSSOP-8",+    "pin_count": 8,+    "category": "Power Supply Chip",+    "subcategory": "Linear Voltage Regulators (LDO)",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps773.pdf",+    "parts": {+      "symbol": "tps77301dgkr.kicad_sym",+      "footprint": "tps77301dgkr.kicad_mod",+      "model_3d": "tps77301dgkr-hero.glb",+      "model_3d_plain": "tps77301dgkr-etched.glb",+      "model_3d_step": "tps77301dgkr-etched.step",+      "model_3d_step_plain": "tps77301dgkr.step",+      "lbr": "tps77301dgkr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2863174",+      "digikey": "296-50560-2-ND",+      "mouser": "595-TPS77301DGKR"+    },+    "distributor_check": {+      "checked_at": "2026-11-06T00:47:06Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-50560-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TPS77301DGKR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "FB/SENSE",+        "type": "input",+        "description": "Feedback input for the adjustable device, which must connect to an external feedback resistor divider, and sense input for fixed options, which must connect to the regulator output as short as possible."+      },+      {+        "number": "2",+        "name": "RESET",+        "type": "output",+        "description": "Open-drain, active-low reset output that goes high-impedance after a 220-ms delay once OUT reaches 95% of its regulated voltage and requires a pullup resistor."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Enable input where a logic low enables the regulator and a logic high shuts it down."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Regulator ground (signal ground for the output capacitor return)."+      },+      {+        "number": "5",+        "name": "IN",+        "type": "power_in",+        "description": "Input voltage supply to the PMOS pass element; the datasheet pages provided do not state an input voltage limit for this pin."+      },+      {+        "number": "6",+        "name": "IN",+        "type": "power_in",+        "description": "Input voltage supply to the PMOS pass element; the datasheet pages provided do not state an input voltage limit for this pin."+      },+      {+        "number": "7",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output voltage that requires an output capacitor to GND of at least 1 µF with ESR within Figures 19 and 21, or at least 10 µF for low-ESR capacitors meeting Figures 18 and 20."+      },+      {+        "number": "8",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output voltage that requires an output capacitor to GND of at least 1 µF with ESR within Figures 19 and 21, or at least 10 µF for low-ESR capacitors meeting Figures 18 and 20."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The pin table on page 4 covers the TPS773xx DGK package, which includes TPS77301DGKR (adjustable, 1.; The datasheet labels IN as 'I' and OUT as 'O'. I mapped them to KiCad power_in and power_out because; The datasheet shows the DGK package as MSOP, while the TI package addendum lists it as VSSOP (DGK), "+        ],+        "pages_sent": 12,+        "cost_usd": 0.0648,+        "at": "2026-11-06T00:46:39"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps773.pdf",+        "pages": 26,+        "sha256": "e831bc9de40e35b4",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "tps77301dgkr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.9,+          3,+          1.35+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "0af17c38f7022ea10ff245f82773c9b00d4163a407490c6b2d91869a0861df56",+        "checked": "2026-11-06",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps77301dgkr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.9,+          3,+          1.35+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "66939dbe678db69b9235adf711b52230f961c323dbd9c09f82a2926c71566591",+        "checked": "2026-11-06",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ],+    "package_dims": {+      "package_code": "DGK",+      "E1": {+        "nom_mm": 3,+        "range_mm": null+      },+      "E": {+        "nom_mm": 4.9,+        "range_mm": null+      },+      "e": {+        "nom_mm": 0.65,+        "range_mm": null+      },+      "source": "TI package designator DGK (no drawing in the datasheet)",+      "model_check": {+        "file": "tps77301dgkr.step",+        "verdict": "SKIP",+        "reasons": [+          "the datasheet dimensions give no height or body size to compare"+        ],+        "by": "factory/package_fit.py"+      }+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file

tps77301dgkr-etched.glbadded

⋯ 1 unchanged line ⋯

tps77301dgkr-hero.glbadded

⋯ 1 unchanged line ⋯

tps77301dgkr-hero.overlay.jsonadded+260

@@ -0,0 +1,260 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "TPS77301DGKR",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 8,+      "span_mm": 5.85,+      "dash_mm": 0.1462,+      "gap_mm": 0.0878,+      "pad_stroke_mm": 0.0351+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 8,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.468,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -2.45,+      2.45,+      -1.135,+      1.135+    ],+    "pads_bbox_mm": [+      -2.925,+      2.925,+      -1.225,+      1.225+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "tps77301dgkr-etched.glb",+    "glb_sha256": "3696343bf94b48c81cefcc1f2a9f1e9a2560d73c7ce4819baad22cdec8c6d7f1",+    "footprint": "tps77301dgkr.kicad_mod",+    "footprint_sha256": "958b5dc3c3e6c00400790581a09c1fd08dc24234c624472792e3ea0ab6f893dc",+    "pins": "page.json component.pins",+    "pins_sha256": "17c2a664ae702f94abad7da84999903e9532265b1bd06af4728f33387bbf10a6"+  },+  "generator": "adom-wiki 1.8.11 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "FB/SENSE",+      "x": -3.025,+      "y": -0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "2",+      "text": "RESET",+      "x": -3.025,+      "y": -0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "3",+      "text": "EN",+      "x": -3.025,+      "y": 0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "4",+      "text": "GND",+      "x": -3.025,+      "y": 0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "5",+      "text": "IN",+      "x": 3.025,+      "y": 0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "6",+      "text": "IN",+      "x": 3.025,+      "y": 0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "7",+      "text": "OUT",+      "x": 3.025,+      "y": -0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "8",+      "text": "OUT",+      "x": 3.025,+      "y": -0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.1125,+        -0.975+      ],+      "size_mm": [+        1.625,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.1125,+        -0.325+      ],+      "size_mm": [+        1.625,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.1125,+        0.325+      ],+      "size_mm": [+        1.625,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.1125,+        0.975+      ],+      "size_mm": [+        1.625,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        2.1125,+        0.975+      ],+      "size_mm": [+        1.625,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        2.1125,+        0.325+      ],+      "size_mm": [+        1.625,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        2.1125,+        -0.325+      ],+      "size_mm": [+        1.625,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        2.1125,+        -0.975+      ],+      "size_mm": [+        1.625,+        0.5+      ],+      "rot": 0.0+    }+  ]+}

tps77301dgkr.glbadded

⋯ 1 unchanged line ⋯

tps77301dgkr.kicad_modadded+198

@@ -0,0 +1,198 @@+(footprint "VSSOP-8_3x3mm_P0.65mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "VSSOP, 8 Pin (https://www.jedec.org/standards-documents/docs/mo-187-f)")+	(tags "VSSOP SO JEDEC-MO-187-AA Texas_DGK0008A")+	(property "Reference" "REF**"+		(at 0 -2.45 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "VSSOP-8_3x3mm_P0.65mm"+		(at 0 2.45 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/gullwing"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -1.61 -1.61)+		(end 1.61 -1.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -1.61 -1.485)+		(end -1.61 -1.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -1.61 1.61)+		(end -1.61 1.485)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 1.61 -1.61)+		(end 1.61 -1.485)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 1.61 1.485)+		(end 1.61 1.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 1.61 1.61)+		(end -1.61 1.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -2.16 -1.49)+			(xy -2.4 -1.82)+			(xy -1.92 -1.82)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -0.75 -1.5)+			(xy 1.5 -1.5)+			(xy 1.5 1.5)+			(xy -1.5 1.5)+			(xy -1.5 -0.75)+		)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 0.75 0.75)+				(thickness 0.11)+			)+		)+	)+	(pad "1" smd roundrect+		(at -2.1125 -0.975)+		(size 1.625 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -2.1125 -0.325)+		(size 1.625 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -2.1125 0.325)+		(size 1.625 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -2.1125 0.975)+		(size 1.625 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at 2.1125 0.975)+		(size 1.625 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at 2.1125 0.325)+		(size 1.625 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at 2.1125 -0.325)+		(size 1.625 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at 2.1125 -0.975)+		(size 1.625 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/VSSOP-8_3x3mm_P0.65mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+	(fp_poly+		(pts (xy -3.18 -1.48) (xy -1.75 -1.48) (xy -1.75 -1.75) (xy 1.75 -1.75) (xy 1.75 -1.48) (xy 3.18 -1.48) (xy 3.18 1.48) (xy 1.75 1.48) (xy 1.75 1.75) (xy -1.75 1.75) (xy -1.75 1.48) (xy -3.18 1.48))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	)+)

tps77301dgkr.kicad_symadded+45

@@ -0,0 +1,45 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "TPS77301DGKR" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 7.62 0) (effects (font (size 1.27 1.27))))+    (property "Value" "TPS77301DGKR" (at 0 -10.16 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "TPS77301DGKR_0_1"+    (rectangle (start -12.70 5.08) (end 12.70 -7.62)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "TPS77301DGKR_1_1"+    (pin input line (at -17.78 2.54 0) (length 5.08)+      (name "FB/SENSE" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at -17.78 0.00 0) (length 5.08)+      (name "RESET" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -2.54 0) (length 5.08)+      (name "EN" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -5.08 0) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin power_out line (at 17.78 2.54 180) (length 5.08)+      (name "OUT" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin power_out line (at 17.78 0.00 180) (length 5.08)+      (name "OUT" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 -2.54 180) (length 5.08)+      (name "IN" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 -5.08 180) (length 5.08)+      (name "IN" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    )+  )+)

tps77301dgkr.lbradded+130

@@ -0,0 +1,130 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="VSSOP-8_3x3mm_P0.65mm">+  <description>VSSOP-8, 3 x 3 mm, 0.65 mm pitch</description>+  <smd name="1" x="-2.1125" y="0.9750" dx="1.6250" dy="0.5000" layer="1" roundness="50"/>+  <smd name="2" x="-2.1125" y="0.3250" dx="1.6250" dy="0.5000" layer="1" roundness="50"/>+  <smd name="3" x="-2.1125" y="-0.3250" dx="1.6250" dy="0.5000" layer="1" roundness="50"/>+  <smd name="4" x="-2.1125" y="-0.9750" dx="1.6250" dy="0.5000" layer="1" roundness="50"/>+  <smd name="5" x="2.1125" y="-0.9750" dx="1.6250" dy="0.5000" layer="1" roundness="50"/>+  <smd name="6" x="2.1125" y="-0.3250" dx="1.6250" dy="0.5000" layer="1" roundness="50"/>+  <smd name="7" x="2.1125" y="0.3250" dx="1.6250" dy="0.5000" layer="1" roundness="50"/>+  <smd name="8" x="2.1125" y="0.9750" dx="1.6250" dy="0.5000" layer="1" roundness="50"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.1600" y="1.4900"/>+    <vertex x="-2.4000" y="1.8200"/>+    <vertex x="-1.9200" y="1.8200"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.7500" y="1.5000"/>+    <vertex x="1.5000" y="1.5000"/>+    <vertex x="1.5000" y="-1.5000"/>+    <vertex x="-1.5000" y="-1.5000"/>+    <vertex x="-1.5000" y="0.7500"/>+  </polygon>+  <wire x1="-1.6100" y1="1.6100" x2="1.6100" y2="1.6100" width="0.1200" layer="21"/>+  <wire x1="-1.6100" y1="1.4850" x2="-1.6100" y2="1.6100" width="0.1200" layer="21"/>+  <wire x1="-1.6100" y1="-1.6100" x2="-1.6100" y2="-1.4850" width="0.1200" layer="21"/>+  <wire x1="1.6100" y1="1.6100" x2="1.6100" y2="1.4850" width="0.1200" layer="21"/>+  <wire x1="1.6100" y1="-1.4850" x2="1.6100" y2="-1.6100" width="0.1200" layer="21"/>+  <wire x1="1.6100" y1="-1.6100" x2="-1.6100" y2="-1.6100" width="0.1200" layer="21"/>+  <text x="0" y="2.388" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-2.388" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="TPS77301DGKR">+  <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>+  <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="5.08" width="0.254" layer="94"/>+  <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="FB/SENSE" x="-17.78" y="2.54" length="middle" direction="in"/>+  <pin name="RESET" x="-17.78" y="0" length="middle" direction="out"/>+  <pin name="EN" x="-17.78" y="-2.54" length="middle" direction="in"/>+  <pin name="GND" x="-17.78" y="-5.08" length="middle" direction="pwr"/>+  <pin name="OUT" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>+  <pin name="OUT@2" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+  <pin name="IN" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+  <pin name="IN@2" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="TPS77301DGKR" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="TPS77301DGKR" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="VSSOP-8_3x3mm_P0.65mm">+      <connects>+        <connect gate="G$1" pin="FB/SENSE" pad="1"/>+        <connect gate="G$1" pin="RESET" pad="2"/>+        <connect gate="G$1" pin="EN" pad="3"/>+        <connect gate="G$1" pin="GND" pad="4"/>+        <connect gate="G$1" pin="OUT" pad="8"/>+        <connect gate="G$1" pin="OUT@2" pad="7"/>+        <connect gate="G$1" pin="IN" pad="6"/>+        <connect gate="G$1" pin="IN@2" pad="5"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

tps77301dgkr.stepadded+3026

@@ -0,0 +1,3026 @@+ISO-10303-21;+HEADER;+/* VSSOP-8_3x3mm_P0.65mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of VSSOP-8_3x3mm_P0.65mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'VSSOP-8_3x3mm_P0.65mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('VSSOP-8_3x3mm_P0.65mm','VSSOP-8_3x3mm_P0.65mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#2802);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#43,#96,#109,#128,#141,#186,#231,#244,#257,#266,#281,#345,#356,#375,#400,#418,#439,#457,#478,#496,#517,#527,#539,#560,#578,#599,#617,#638,#656,#677,#694,#709,#724,#735,#759,#805,#819,#833,#847,#893,#913,#944,#1015,#1031,#1084,#1095,#1155,#1171,#1224,#1235,#1295,#1311,#1364,#1372,#1430,#1446,#1494,#1559,#1575,#1623,#1633,#1693,#1709,#1762,#1773,#1833,#1849,#1902,#1913,#1973,#1989,#2040,#2050,#2062,#2074,#2086,#2120,#2130,#2142,#2154,#2166,#2176,#2186,#2194,#2204,#2215,#2225,#2235,#2245,#2255,#2265,#2274,#2284,#2294,#2304,#2314,#2324,#2334,#2344,#2352,#2362,#2372,#2382,#2392,#2402,#2412,#2422,#2430,#2440,#2450,#2460,#2470,#2480,#2490,#2498,#2509,#2518,#2528,#2538,#2548,#2558,#2567,#2577,#2587,#2596,#2606,#2616,#2626,#2636,#2644,#2654,#2664,#2673,#2683,#2693,#2703,#2713,#2721,#2731,#2741,#2750,#2760,#2770,#2780,#2790,#2798));+#17=ADVANCED_FACE('',(#18),#42,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#34,#39));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-1.251111990816,1.402223981632,0.25));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(1.251111990816,1.402223981632,0.25));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(1.,1.110223024625E-16,0.));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#24,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(1.3,1.5,0.71));+#33=B_SPLINE_CURVE_WITH_KNOTS('',1,(#25,#32),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#34=ORIENTED_EDGE('',*,*,#35,.F.);+#35=EDGE_CURVE('',#36,#31,#38,.T.);+#36=VERTEX_POINT('',#37);+#37=CARTESIAN_POINT('',(-1.3,1.5,0.71));+#38=LINE('',#37,#27);+#39=ORIENTED_EDGE('',*,*,#40,.F.);+#40=EDGE_CURVE('',#22,#36,#41,.T.);+#41=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#37),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#42=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#37),(#25,#32)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.6),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=ADVANCED_FACE('',(#44),#93,.F.);+#44=FACE_BOUND('',#45,.T.);+#45=EDGE_LOOP('',(#20,#46,#53,#60,#67,#74,#81,#88));+#46=ORIENTED_EDGE('',*,*,#47,.T.);+#47=EDGE_CURVE('',#24,#48,#50,.T.);+#48=VERTEX_POINT('',#49);+#49=CARTESIAN_POINT('',(1.402223981632,1.251111990816,0.25));+#50=LINE('',#25,#51);+#51=VECTOR('',#52,1.);+#52=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#53=ORIENTED_EDGE('',*,*,#54,.T.);+#54=EDGE_CURVE('',#48,#55,#57,.T.);+#55=VERTEX_POINT('',#56);+#56=CARTESIAN_POINT('',(1.402223981632,-1.251111990816,0.25));+#57=LINE('',#49,#58);+#58=VECTOR('',#59,1.);+#59=DIRECTION('',(1.110223024625E-16,-1.,0.));+#60=ORIENTED_EDGE('',*,*,#61,.T.);+#61=EDGE_CURVE('',#55,#62,#64,.T.);+#62=VERTEX_POINT('',#63);+#63=CARTESIAN_POINT('',(1.251111990816,-1.402223981632,0.25));+#64=LINE('',#56,#65);+#65=VECTOR('',#66,1.);+#66=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#67=ORIENTED_EDGE('',*,*,#68,.T.);+#68=EDGE_CURVE('',#62,#69,#71,.T.);+#69=VERTEX_POINT('',#70);+#70=CARTESIAN_POINT('',(-1.251111990816,-1.402223981632,0.25));+#71=LINE('',#63,#72);+#72=VECTOR('',#73,1.);+#73=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#74=ORIENTED_EDGE('',*,*,#75,.T.);+#75=EDGE_CURVE('',#69,#76,#78,.T.);+#76=VERTEX_POINT('',#77);+#77=CARTESIAN_POINT('',(-1.402223981632,-1.251111990816,0.25));+#78=LINE('',#70,#79);+#79=VECTOR('',#80,1.);+#80=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#81=ORIENTED_EDGE('',*,*,#82,.T.);+#82=EDGE_CURVE('',#76,#83,#85,.T.);+#83=VERTEX_POINT('',#84);+#84=CARTESIAN_POINT('',(-1.402223981632,1.251111990816,0.25));+#85=LINE('',#77,#86);+#86=VECTOR('',#87,1.);+#87=DIRECTION('',(-1.110223024625E-16,1.,0.));+#88=ORIENTED_EDGE('',*,*,#89,.T.);+#89=EDGE_CURVE('',#83,#22,#90,.T.);+#90=LINE('',#84,#91);+#91=VECTOR('',#92,1.);+#92=DIRECTION('',(0.707106781187,0.707106781187,0.));+#93=PLANE('',#94);+#94=AXIS2_PLACEMENT_3D('',#23,#13,#95);+#95=DIRECTION('',(0.66575703279,-0.746168595754,0.));+#96=ADVANCED_FACE('',(#97),#108,.F.);+#97=FACE_BOUND('',#98,.F.);+#98=EDGE_LOOP('',(#46,#99,#104,#107));+#99=ORIENTED_EDGE('',*,*,#100,.T.);+#100=EDGE_CURVE('',#48,#101,#103,.T.);+#101=VERTEX_POINT('',#102);+#102=CARTESIAN_POINT('',(1.5,1.3,0.71));+#103=B_SPLINE_CURVE_WITH_KNOTS('',1,(#49,#102),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#104=ORIENTED_EDGE('',*,*,#105,.F.);+#105=EDGE_CURVE('',#31,#101,#106,.T.);+#106=LINE('',#32,#51);+#107=ORIENTED_EDGE('',*,*,#30,.F.);+#108=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#25,#32),(#49,#102)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.282842712475),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#109=ADVANCED_FACE('',(#110),#126,.F.);+#110=FACE_BOUND('',#111,.F.);+#111=EDGE_LOOP('',(#112,#113,#118,#123));+#112=ORIENTED_EDGE('',*,*,#35,.T.);+#113=ORIENTED_EDGE('',*,*,#114,.T.);+#114=EDGE_CURVE('',#31,#115,#117,.T.);+#115=VERTEX_POINT('',#116);+#116=CARTESIAN_POINT('',(1.3,1.5,0.89));+#117=B_SPLINE_CURVE_WITH_KNOTS('',1,(#32,#116),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#118=ORIENTED_EDGE('',*,*,#119,.F.);+#119=EDGE_CURVE('',#120,#115,#122,.T.);+#120=VERTEX_POINT('',#121);+#121=CARTESIAN_POINT('',(-1.3,1.5,0.89));+#122=LINE('',#121,#27);+#123=ORIENTED_EDGE('',*,*,#124,.F.);+#124=EDGE_CURVE('',#36,#120,#125,.T.);+#125=B_SPLINE_CURVE_WITH_KNOTS('',1,(#37,#121),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#126=PLANE('',#127);+#127=AXIS2_PLACEMENT_3D('',#121,#59,#28);+#128=ADVANCED_FACE('',(#129),#140,.F.);+#129=FACE_BOUND('',#130,.F.);+#130=EDGE_LOOP('',(#88,#131,#132,#137));+#131=ORIENTED_EDGE('',*,*,#40,.T.);+#132=ORIENTED_EDGE('',*,*,#133,.F.);+#133=EDGE_CURVE('',#134,#36,#136,.T.);+#134=VERTEX_POINT('',#135);+#135=CARTESIAN_POINT('',(-1.5,1.3,0.71));+#136=LINE('',#135,#91);+#137=ORIENTED_EDGE('',*,*,#138,.F.);+#138=EDGE_CURVE('',#83,#134,#139,.T.);+#139=B_SPLINE_CURVE_WITH_KNOTS('',1,(#84,#135),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#140=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#84,#135),(#23,#37)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.282842712475),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#141=ADVANCED_FACE('',(#142),#185,.F.);+#142=FACE_BOUND('',#143,.F.);+#143=EDGE_LOOP('',(#81,#144,#145,#151,#155,#159,#163,#167,#171,#175,#179,#182));+#144=ORIENTED_EDGE('',*,*,#138,.T.);+#145=ORIENTED_EDGE('',*,*,#146,.F.);+#146=EDGE_CURVE('',#147,#134,#149,.T.);+#147=VERTEX_POINT('',#148);+#148=CARTESIAN_POINT('',(-1.5,1.135,0.71));+#149=LINE('',#150,#86);+#150=CARTESIAN_POINT('',(-1.5,-1.3,0.71));+#151=ORIENTED_EDGE('',*,*,#152,.F.);+#152=EDGE_CURVE('',#153,#147,#149,.T.);+#153=VERTEX_POINT('',#154);+#154=CARTESIAN_POINT('',(-1.5,0.815,0.71));+#155=ORIENTED_EDGE('',*,*,#156,.F.);+#156=EDGE_CURVE('',#157,#153,#149,.T.);+#157=VERTEX_POINT('',#158);+#158=CARTESIAN_POINT('',(-1.5,0.485,0.71));+#159=ORIENTED_EDGE('',*,*,#160,.F.);+#160=EDGE_CURVE('',#161,#157,#149,.T.);+#161=VERTEX_POINT('',#162);+#162=CARTESIAN_POINT('',(-1.5,0.165,0.71));+#163=ORIENTED_EDGE('',*,*,#164,.F.);+#164=EDGE_CURVE('',#165,#161,#149,.T.);+#165=VERTEX_POINT('',#166);+#166=CARTESIAN_POINT('',(-1.5,-0.165,0.71));+#167=ORIENTED_EDGE('',*,*,#168,.F.);+#168=EDGE_CURVE('',#169,#165,#149,.T.);+#169=VERTEX_POINT('',#170);+#170=CARTESIAN_POINT('',(-1.5,-0.485,0.71));+#171=ORIENTED_EDGE('',*,*,#172,.F.);+#172=EDGE_CURVE('',#173,#169,#149,.T.);+#173=VERTEX_POINT('',#174);+#174=CARTESIAN_POINT('',(-1.5,-0.815,0.71));+#175=ORIENTED_EDGE('',*,*,#176,.F.);+#176=EDGE_CURVE('',#177,#173,#149,.T.);+#177=VERTEX_POINT('',#178);+#178=CARTESIAN_POINT('',(-1.5,-1.135,0.71));+#179=ORIENTED_EDGE('',*,*,#180,.F.);+#180=EDGE_CURVE('',#181,#177,#149,.T.);+#181=VERTEX_POINT('',#150);+#182=ORIENTED_EDGE('',*,*,#183,.F.);+#183=EDGE_CURVE('',#76,#181,#184,.T.);+#184=B_SPLINE_CURVE_WITH_KNOTS('',1,(#77,#150),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#185=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#77,#150),(#84,#135)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.6),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#186=ADVANCED_FACE('',(#187),#230,.F.);+#187=FACE_BOUND('',#188,.F.);+#188=EDGE_LOOP('',(#53,#189,#194,#199,#203,#207,#211,#215,#219,#223,#227,#229));+#189=ORIENTED_EDGE('',*,*,#190,.T.);+#190=EDGE_CURVE('',#55,#191,#193,.T.);+#191=VERTEX_POINT('',#192);+#192=CARTESIAN_POINT('',(1.5,-1.3,0.71));+#193=B_SPLINE_CURVE_WITH_KNOTS('',1,(#56,#192),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#194=ORIENTED_EDGE('',*,*,#195,.F.);+#195=EDGE_CURVE('',#196,#191,#198,.T.);+#196=VERTEX_POINT('',#197);+#197=CARTESIAN_POINT('',(1.5,-1.135,0.71));+#198=LINE('',#102,#58);+#199=ORIENTED_EDGE('',*,*,#200,.F.);+#200=EDGE_CURVE('',#201,#196,#198,.T.);+#201=VERTEX_POINT('',#202);+#202=CARTESIAN_POINT('',(1.5,-0.815,0.71));+#203=ORIENTED_EDGE('',*,*,#204,.F.);+#204=EDGE_CURVE('',#205,#201,#198,.T.);+#205=VERTEX_POINT('',#206);+#206=CARTESIAN_POINT('',(1.5,-0.485,0.71));+#207=ORIENTED_EDGE('',*,*,#208,.F.);+#208=EDGE_CURVE('',#209,#205,#198,.T.);+#209=VERTEX_POINT('',#210);+#210=CARTESIAN_POINT('',(1.5,-0.165,0.71));+#211=ORIENTED_EDGE('',*,*,#212,.F.);+#212=EDGE_CURVE('',#213,#209,#198,.T.);+#213=VERTEX_POINT('',#214);+#214=CARTESIAN_POINT('',(1.5,0.165,0.71));+#215=ORIENTED_EDGE('',*,*,#216,.F.);+#216=EDGE_CURVE('',#217,#213,#198,.T.);+#217=VERTEX_POINT('',#218);+#218=CARTESIAN_POINT('',(1.5,0.485,0.71));+#219=ORIENTED_EDGE('',*,*,#220,.F.);+#220=EDGE_CURVE('',#221,#217,#198,.T.);+#221=VERTEX_POINT('',#222);+#222=CARTESIAN_POINT('',(1.5,0.815,0.71));+#223=ORIENTED_EDGE('',*,*,#224,.F.);+#224=EDGE_CURVE('',#225,#221,#198,.T.);+#225=VERTEX_POINT('',#226);+#226=CARTESIAN_POINT('',(1.5,1.135,0.71));+#227=ORIENTED_EDGE('',*,*,#228,.F.);+#228=EDGE_CURVE('',#101,#225,#198,.T.);+#229=ORIENTED_EDGE('',*,*,#100,.F.);+#230=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#49,#102),(#56,#192)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.6),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#231=ADVANCED_FACE('',(#232),#243,.F.);+#232=FACE_BOUND('',#233,.F.);+#233=EDGE_LOOP('',(#74,#234,#235,#240));+#234=ORIENTED_EDGE('',*,*,#183,.T.);+#235=ORIENTED_EDGE('',*,*,#236,.F.);+#236=EDGE_CURVE('',#237,#181,#239,.T.);+#237=VERTEX_POINT('',#238);+#238=CARTESIAN_POINT('',(-1.3,-1.5,0.71));+#239=LINE('',#238,#79);+#240=ORIENTED_EDGE('',*,*,#241,.F.);+#241=EDGE_CURVE('',#69,#237,#242,.T.);+#242=B_SPLINE_CURVE_WITH_KNOTS('',1,(#70,#238),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#243=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#70,#238),(#77,#150)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.282842712475),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#244=ADVANCED_FACE('',(#245),#256,.F.);+#245=FACE_BOUND('',#246,.F.);+#246=EDGE_LOOP('',(#60,#247,#252,#255));+#247=ORIENTED_EDGE('',*,*,#248,.T.);+#248=EDGE_CURVE('',#62,#249,#251,.T.);+#249=VERTEX_POINT('',#250);+#250=CARTESIAN_POINT('',(1.3,-1.5,0.71));+#251=B_SPLINE_CURVE_WITH_KNOTS('',1,(#63,#250),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#252=ORIENTED_EDGE('',*,*,#253,.F.);+#253=EDGE_CURVE('',#191,#249,#254,.T.);+#254=LINE('',#192,#65);+#255=ORIENTED_EDGE('',*,*,#190,.F.);+#256=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#56,#192),(#63,#250)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.282842712475),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#257=ADVANCED_FACE('',(#258),#265,.F.);+#258=FACE_BOUND('',#259,.F.);+#259=EDGE_LOOP('',(#67,#260,#261,#264));+#260=ORIENTED_EDGE('',*,*,#241,.T.);+#261=ORIENTED_EDGE('',*,*,#262,.F.);+#262=EDGE_CURVE('',#249,#237,#263,.T.);+#263=LINE('',#250,#72);+#264=ORIENTED_EDGE('',*,*,#248,.F.);+#265=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#63,#250),(#70,#238)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.6),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#266=ADVANCED_FACE('',(#267),#279,.F.);+#267=FACE_BOUND('',#268,.F.);+#268=EDGE_LOOP('',(#269,#270,#275,#278));+#269=ORIENTED_EDGE('',*,*,#105,.T.);+#270=ORIENTED_EDGE('',*,*,#271,.T.);+#271=EDGE_CURVE('',#101,#272,#274,.T.);+#272=VERTEX_POINT('',#273);+#273=CARTESIAN_POINT('',(1.5,1.3,0.89));+#274=B_SPLINE_CURVE_WITH_KNOTS('',1,(#102,#273),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#275=ORIENTED_EDGE('',*,*,#276,.F.);+#276=EDGE_CURVE('',#115,#272,#277,.T.);+#277=LINE('',#116,#51);+#278=ORIENTED_EDGE('',*,*,#114,.F.);+#279=PLANE('',#280);+#280=AXIS2_PLACEMENT_3D('',#116,#66,#52);+#281=ADVANCED_FACE('',(#282),#340,.F.);+#282=FACE_BOUND('',#283,.F.);+#283=EDGE_LOOP('',(#284,#289,#290,#291,#296,#302,#307,#312,#317,#322,#328,#336));+#284=ORIENTED_EDGE('',*,*,#285,.T.);+#285=EDGE_CURVE('',#286,#120,#288,.T.);+#286=VERTEX_POINT('',#287);+#287=CARTESIAN_POINT('',(-1.5,1.3,0.89));+#288=LINE('',#287,#91);+#289=ORIENTED_EDGE('',*,*,#119,.T.);+#290=ORIENTED_EDGE('',*,*,#276,.T.);+#291=ORIENTED_EDGE('',*,*,#292,.T.);+#292=EDGE_CURVE('',#272,#293,#295,.T.);+#293=VERTEX_POINT('',#294);+#294=CARTESIAN_POINT('',(1.5,1.135,0.89));+#295=LINE('',#273,#58);+#296=ORIENTED_EDGE('',*,*,#297,.T.);+#297=EDGE_CURVE('',#293,#298,#300,.T.);+#298=VERTEX_POINT('',#299);+#299=CARTESIAN_POINT('',(1.45,1.135,0.89));+#300=LINE('',#301,#72);+#301=CARTESIAN_POINT('',(1.55,1.135,0.89));+#302=ORIENTED_EDGE('',*,*,#303,.F.);+#303=EDGE_CURVE('',#304,#298,#306,.T.);+#304=VERTEX_POINT('',#305);+#305=CARTESIAN_POINT('',(1.45,1.275,0.89));+#306=LINE('',#305,#58);+#307=ORIENTED_EDGE('',*,*,#308,.F.);+#308=EDGE_CURVE('',#309,#304,#311,.T.);+#309=VERTEX_POINT('',#310);+#310=CARTESIAN_POINT('',(1.275,1.45,0.89));+#311=LINE('',#310,#51);+#312=ORIENTED_EDGE('',*,*,#313,.F.);+#313=EDGE_CURVE('',#314,#309,#316,.T.);+#314=VERTEX_POINT('',#315);+#315=CARTESIAN_POINT('',(-1.275,1.45,0.89));+#316=LINE('',#315,#27);+#317=ORIENTED_EDGE('',*,*,#318,.F.);+#318=EDGE_CURVE('',#319,#314,#321,.T.);+#319=VERTEX_POINT('',#320);+#320=CARTESIAN_POINT('',(-1.45,1.275,0.89));+#321=LINE('',#320,#91);+#322=ORIENTED_EDGE('',*,*,#323,.F.);+#323=EDGE_CURVE('',#324,#319,#326,.T.);+#324=VERTEX_POINT('',#325);+#325=CARTESIAN_POINT('',(-1.45,1.135,0.89));+#326=LINE('',#327,#86);+#327=CARTESIAN_POINT('',(-1.45,-1.275,0.89));+#328=ORIENTED_EDGE('',*,*,#329,.F.);+#329=EDGE_CURVE('',#330,#324,#332,.T.);+#330=VERTEX_POINT('',#331);+#331=CARTESIAN_POINT('',(-1.5,1.135,0.89));+#332=LINE('',#333,#334);+#333=CARTESIAN_POINT('',(-1.55,1.135,0.89));+#334=VECTOR('',#335,1.);+#335=DIRECTION('',(1.,-1.144237745222E-17,0.));+#336=ORIENTED_EDGE('',*,*,#337,.T.);+#337=EDGE_CURVE('',#330,#286,#338,.T.);+#338=LINE('',#339,#86);+#339=CARTESIAN_POINT('',(-1.5,-1.3,0.89));+#340=PLANE('',#341);+#341=AXIS2_PLACEMENT_3D('',#342,#343,#344);+#342=CARTESIAN_POINT('',(-1.527474198549E-16,1.475,0.89));+#343=DIRECTION('',(7.836802885032E-18,-1.835079379475E-17,-1.));+#344=DIRECTION('',(1.,1.199334786602E-16,7.836802885032E-18));+#345=ADVANCED_FACE('',(#346),#354,.F.);+#346=FACE_BOUND('',#347,.F.);+#347=EDGE_LOOP('',(#348,#349,#350,#351));+#348=ORIENTED_EDGE('',*,*,#133,.T.);+#349=ORIENTED_EDGE('',*,*,#124,.T.);+#350=ORIENTED_EDGE('',*,*,#285,.F.);+#351=ORIENTED_EDGE('',*,*,#352,.F.);+#352=EDGE_CURVE('',#134,#286,#353,.T.);+#353=B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#287),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#354=PLANE('',#355);+#355=AXIS2_PLACEMENT_3D('',#287,#52,#92);+#356=ADVANCED_FACE('',(#357),#373,.F.);+#357=FACE_BOUND('',#358,.F.);+#358=EDGE_LOOP('',(#359,#363,#364,#371));+#359=ORIENTED_EDGE('',*,*,#360,.F.);+#360=EDGE_CURVE('',#181,#361,#362,.T.);+#361=VERTEX_POINT('',#339);+#362=B_SPLINE_CURVE_WITH_KNOTS('',1,(#150,#339),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#363=ORIENTED_EDGE('',*,*,#180,.T.);+#364=ORIENTED_EDGE('',*,*,#365,.T.);+#365=EDGE_CURVE('',#177,#366,#368,.T.);+#366=VERTEX_POINT('',#367);+#367=CARTESIAN_POINT('',(-1.5,-1.135,0.89));+#368=LINE('',#369,#370);+#369=CARTESIAN_POINT('',(-1.5,-1.135,0.627447714064));+#370=VECTOR('',#13,1.);+#371=ORIENTED_EDGE('',*,*,#372,.F.);+#372=EDGE_CURVE('',#361,#366,#338,.T.);+#373=PLANE('',#374);+#374=AXIS2_PLACEMENT_3D('',#339,#28,#87);+#375=ADVANCED_FACE('',(#376),#398,.F.);+#376=FACE_BOUND('',#377,.F.);+#377=EDGE_LOOP('',(#378,#386,#387,#393));+#378=ORIENTED_EDGE('',*,*,#379,.F.);+#379=EDGE_CURVE('',#177,#380,#382,.T.);+#380=VERTEX_POINT('',#381);+#381=CARTESIAN_POINT('',(-1.55,-1.135,0.71));+#382=LINE('',#383,#384);+#383=CARTESIAN_POINT('',(-1.4,-1.135,0.71));+#384=VECTOR('',#385,1.);+#385=DIRECTION('',(-1.,1.144237745222E-17,0.));+#386=ORIENTED_EDGE('',*,*,#176,.T.);+#387=ORIENTED_EDGE('',*,*,#388,.T.);+#388=EDGE_CURVE('',#173,#389,#391,.T.);+#389=VERTEX_POINT('',#390);+#390=CARTESIAN_POINT('',(-1.55,-0.815,0.71));+#391=LINE('',#392,#384);+#392=CARTESIAN_POINT('',(-1.4,-0.815,0.71));+#393=ORIENTED_EDGE('',*,*,#394,.F.);+#394=EDGE_CURVE('',#380,#389,#395,.T.);+#395=LINE('',#381,#396);+#396=VECTOR('',#397,1.);+#397=DIRECTION('',(1.144237745222E-17,1.,0.));+#398=PLANE('',#399);+#399=AXIS2_PLACEMENT_3D('',#383,#13,#385);+#400=ADVANCED_FACE('',(#401),#373,.F.);+#401=FACE_BOUND('',#402,.F.);+#402=EDGE_LOOP('',(#403,#409,#410,#416));+#403=ORIENTED_EDGE('',*,*,#404,.F.);+#404=EDGE_CURVE('',#173,#405,#407,.T.);+#405=VERTEX_POINT('',#406);+#406=CARTESIAN_POINT('',(-1.5,-0.815,0.89));+#407=LINE('',#408,#370);+#408=CARTESIAN_POINT('',(-1.5,-0.815,0.627447714064));+#409=ORIENTED_EDGE('',*,*,#172,.T.);+#410=ORIENTED_EDGE('',*,*,#411,.T.);+#411=EDGE_CURVE('',#169,#412,#414,.T.);+#412=VERTEX_POINT('',#413);+#413=CARTESIAN_POINT('',(-1.5,-0.485,0.89));+#414=LINE('',#415,#370);+#415=CARTESIAN_POINT('',(-1.5,-0.485,0.627447714064));+#416=ORIENTED_EDGE('',*,*,#417,.F.);+#417=EDGE_CURVE('',#405,#412,#338,.T.);+#418=ADVANCED_FACE('',(#419),#437,.F.);+#419=FACE_BOUND('',#420,.F.);+#420=EDGE_LOOP('',(#421,#427,#428,#434));+#421=ORIENTED_EDGE('',*,*,#422,.F.);+#422=EDGE_CURVE('',#169,#423,#425,.T.);+#423=VERTEX_POINT('',#424);+#424=CARTESIAN_POINT('',(-1.55,-0.485,0.71));+#425=LINE('',#426,#384);+#426=CARTESIAN_POINT('',(-1.4,-0.485,0.71));+#427=ORIENTED_EDGE('',*,*,#168,.T.);+#428=ORIENTED_EDGE('',*,*,#429,.T.);+#429=EDGE_CURVE('',#165,#430,#432,.T.);+#430=VERTEX_POINT('',#431);+#431=CARTESIAN_POINT('',(-1.55,-0.165,0.71));+#432=LINE('',#433,#384);+#433=CARTESIAN_POINT('',(-1.4,-0.165,0.71));+#434=ORIENTED_EDGE('',*,*,#435,.F.);+#435=EDGE_CURVE('',#423,#430,#436,.T.);+#436=LINE('',#424,#396);+#437=PLANE('',#438);+#438=AXIS2_PLACEMENT_3D('',#426,#13,#385);+#439=ADVANCED_FACE('',(#440),#373,.F.);+#440=FACE_BOUND('',#441,.F.);+#441=EDGE_LOOP('',(#442,#448,#449,#455));+#442=ORIENTED_EDGE('',*,*,#443,.F.);+#443=EDGE_CURVE('',#165,#444,#446,.T.);+#444=VERTEX_POINT('',#445);+#445=CARTESIAN_POINT('',(-1.5,-0.165,0.89));+#446=LINE('',#447,#370);+#447=CARTESIAN_POINT('',(-1.5,-0.165,0.627447714064));+#448=ORIENTED_EDGE('',*,*,#164,.T.);+#449=ORIENTED_EDGE('',*,*,#450,.T.);+#450=EDGE_CURVE('',#161,#451,#453,.T.);+#451=VERTEX_POINT('',#452);+#452=CARTESIAN_POINT('',(-1.5,0.165,0.89));+#453=LINE('',#454,#370);+#454=CARTESIAN_POINT('',(-1.5,0.165,0.627447714064));+#455=ORIENTED_EDGE('',*,*,#456,.F.);+#456=EDGE_CURVE('',#444,#451,#338,.T.);+#457=ADVANCED_FACE('',(#458),#476,.F.);+#458=FACE_BOUND('',#459,.F.);+#459=EDGE_LOOP('',(#460,#466,#467,#473));+#460=ORIENTED_EDGE('',*,*,#461,.F.);+#461=EDGE_CURVE('',#161,#462,#464,.T.);+#462=VERTEX_POINT('',#463);+#463=CARTESIAN_POINT('',(-1.55,0.165,0.71));+#464=LINE('',#465,#384);+#465=CARTESIAN_POINT('',(-1.4,0.165,0.71));+#466=ORIENTED_EDGE('',*,*,#160,.T.);+#467=ORIENTED_EDGE('',*,*,#468,.T.);+#468=EDGE_CURVE('',#157,#469,#471,.T.);+#469=VERTEX_POINT('',#470);+#470=CARTESIAN_POINT('',(-1.55,0.485,0.71));+#471=LINE('',#472,#384);+#472=CARTESIAN_POINT('',(-1.4,0.485,0.71));+#473=ORIENTED_EDGE('',*,*,#474,.F.);+#474=EDGE_CURVE('',#462,#469,#475,.T.);+#475=LINE('',#463,#396);+#476=PLANE('',#477);+#477=AXIS2_PLACEMENT_3D('',#465,#13,#385);+#478=ADVANCED_FACE('',(#479),#373,.F.);+#479=FACE_BOUND('',#480,.F.);+#480=EDGE_LOOP('',(#481,#487,#488,#494));+#481=ORIENTED_EDGE('',*,*,#482,.F.);+#482=EDGE_CURVE('',#157,#483,#485,.T.);+#483=VERTEX_POINT('',#484);+#484=CARTESIAN_POINT('',(-1.5,0.485,0.89));+#485=LINE('',#486,#370);+#486=CARTESIAN_POINT('',(-1.5,0.485,0.627447714064));+#487=ORIENTED_EDGE('',*,*,#156,.T.);+#488=ORIENTED_EDGE('',*,*,#489,.T.);+#489=EDGE_CURVE('',#153,#490,#492,.T.);+#490=VERTEX_POINT('',#491);+#491=CARTESIAN_POINT('',(-1.5,0.815,0.89));+#492=LINE('',#493,#370);+#493=CARTESIAN_POINT('',(-1.5,0.815,0.627447714064));+#494=ORIENTED_EDGE('',*,*,#495,.F.);+#495=EDGE_CURVE('',#483,#490,#338,.T.);+#496=ADVANCED_FACE('',(#497),#515,.F.);+#497=FACE_BOUND('',#498,.F.);+#498=EDGE_LOOP('',(#499,#505,#506,#512));+#499=ORIENTED_EDGE('',*,*,#500,.F.);+#500=EDGE_CURVE('',#153,#501,#503,.T.);+#501=VERTEX_POINT('',#502);+#502=CARTESIAN_POINT('',(-1.55,0.815,0.71));+#503=LINE('',#504,#384);+#504=CARTESIAN_POINT('',(-1.4,0.815,0.71));+#505=ORIENTED_EDGE('',*,*,#152,.T.);+#506=ORIENTED_EDGE('',*,*,#507,.T.);+#507=EDGE_CURVE('',#147,#508,#510,.T.);+#508=VERTEX_POINT('',#509);+#509=CARTESIAN_POINT('',(-1.55,1.135,0.71));+#510=LINE('',#511,#384);+#511=CARTESIAN_POINT('',(-1.4,1.135,0.71));+#512=ORIENTED_EDGE('',*,*,#513,.F.);+#513=EDGE_CURVE('',#501,#508,#514,.T.);+#514=LINE('',#502,#396);+#515=PLANE('',#516);+#516=AXIS2_PLACEMENT_3D('',#504,#13,#385);+#517=ADVANCED_FACE('',(#518),#373,.F.);+#518=FACE_BOUND('',#519,.F.);+#519=EDGE_LOOP('',(#520,#524,#525,#526));+#520=ORIENTED_EDGE('',*,*,#521,.F.);+#521=EDGE_CURVE('',#147,#330,#522,.T.);+#522=LINE('',#523,#370);+#523=CARTESIAN_POINT('',(-1.5,1.135,0.627447714064));+#524=ORIENTED_EDGE('',*,*,#146,.T.);+#525=ORIENTED_EDGE('',*,*,#352,.T.);+#526=ORIENTED_EDGE('',*,*,#337,.F.);+#527=ADVANCED_FACE('',(#528),#537,.F.);+#528=FACE_BOUND('',#529,.F.);+#529=EDGE_LOOP('',(#530,#531,#532,#536));+#530=ORIENTED_EDGE('',*,*,#271,.F.);+#531=ORIENTED_EDGE('',*,*,#228,.T.);+#532=ORIENTED_EDGE('',*,*,#533,.T.);+#533=EDGE_CURVE('',#225,#293,#534,.T.);+#534=LINE('',#535,#370);+#535=CARTESIAN_POINT('',(1.5,1.135,0.627447714064));+#536=ORIENTED_EDGE('',*,*,#292,.F.);+#537=PLANE('',#538);+#538=AXIS2_PLACEMENT_3D('',#273,#73,#59);+#539=ADVANCED_FACE('',(#540),#558,.F.);+#540=FACE_BOUND('',#541,.F.);+#541=EDGE_LOOP('',(#542,#548,#549,#555));+#542=ORIENTED_EDGE('',*,*,#543,.F.);+#543=EDGE_CURVE('',#225,#544,#546,.T.);+#544=VERTEX_POINT('',#545);+#545=CARTESIAN_POINT('',(1.55,1.135,0.71));+#546=LINE('',#547,#27);+#547=CARTESIAN_POINT('',(1.4,1.135,0.71));+#548=ORIENTED_EDGE('',*,*,#224,.T.);+#549=ORIENTED_EDGE('',*,*,#550,.T.);+#550=EDGE_CURVE('',#221,#551,#553,.T.);+#551=VERTEX_POINT('',#552);+#552=CARTESIAN_POINT('',(1.55,0.815,0.71));+#553=LINE('',#554,#27);+#554=CARTESIAN_POINT('',(1.4,0.815,0.71));+#555=ORIENTED_EDGE('',*,*,#556,.F.);+#556=EDGE_CURVE('',#544,#551,#557,.T.);+#557=LINE('',#545,#58);+#558=PLANE('',#559);+#559=AXIS2_PLACEMENT_3D('',#547,#13,#28);+#560=ADVANCED_FACE('',(#561),#537,.F.);+#561=FACE_BOUND('',#562,.F.);+#562=EDGE_LOOP('',(#563,#569,#570,#576));+#563=ORIENTED_EDGE('',*,*,#564,.F.);+#564=EDGE_CURVE('',#221,#565,#567,.T.);+#565=VERTEX_POINT('',#566);+#566=CARTESIAN_POINT('',(1.5,0.815,0.89));+#567=LINE('',#568,#370);+#568=CARTESIAN_POINT('',(1.5,0.815,0.627447714064));+#569=ORIENTED_EDGE('',*,*,#220,.T.);+#570=ORIENTED_EDGE('',*,*,#571,.T.);+#571=EDGE_CURVE('',#217,#572,#574,.T.);+#572=VERTEX_POINT('',#573);+#573=CARTESIAN_POINT('',(1.5,0.485,0.89));+#574=LINE('',#575,#370);+#575=CARTESIAN_POINT('',(1.5,0.485,0.627447714064));+#576=ORIENTED_EDGE('',*,*,#577,.F.);+#577=EDGE_CURVE('',#565,#572,#295,.T.);+#578=ADVANCED_FACE('',(#579),#597,.F.);+#579=FACE_BOUND('',#580,.F.);+#580=EDGE_LOOP('',(#581,#587,#588,#594));+#581=ORIENTED_EDGE('',*,*,#582,.F.);+#582=EDGE_CURVE('',#217,#583,#585,.T.);+#583=VERTEX_POINT('',#584);+#584=CARTESIAN_POINT('',(1.55,0.485,0.71));+#585=LINE('',#586,#27);+#586=CARTESIAN_POINT('',(1.4,0.485,0.71));+#587=ORIENTED_EDGE('',*,*,#216,.T.);+#588=ORIENTED_EDGE('',*,*,#589,.T.);+#589=EDGE_CURVE('',#213,#590,#592,.T.);+#590=VERTEX_POINT('',#591);+#591=CARTESIAN_POINT('',(1.55,0.165,0.71));+#592=LINE('',#593,#27);+#593=CARTESIAN_POINT('',(1.4,0.165,0.71));+#594=ORIENTED_EDGE('',*,*,#595,.F.);+#595=EDGE_CURVE('',#583,#590,#596,.T.);+#596=LINE('',#584,#58);+#597=PLANE('',#598);+#598=AXIS2_PLACEMENT_3D('',#586,#13,#28);+#599=ADVANCED_FACE('',(#600),#537,.F.);+#600=FACE_BOUND('',#601,.F.);+#601=EDGE_LOOP('',(#602,#608,#609,#615));+#602=ORIENTED_EDGE('',*,*,#603,.F.);+#603=EDGE_CURVE('',#213,#604,#606,.T.);+#604=VERTEX_POINT('',#605);+#605=CARTESIAN_POINT('',(1.5,0.165,0.89));+#606=LINE('',#607,#370);+#607=CARTESIAN_POINT('',(1.5,0.165,0.627447714064));+#608=ORIENTED_EDGE('',*,*,#212,.T.);+#609=ORIENTED_EDGE('',*,*,#610,.T.);+#610=EDGE_CURVE('',#209,#611,#613,.T.);+#611=VERTEX_POINT('',#612);+#612=CARTESIAN_POINT('',(1.5,-0.165,0.89));+#613=LINE('',#614,#370);+#614=CARTESIAN_POINT('',(1.5,-0.165,0.627447714064));+#615=ORIENTED_EDGE('',*,*,#616,.F.);+#616=EDGE_CURVE('',#604,#611,#295,.T.);+#617=ADVANCED_FACE('',(#618),#636,.F.);+#618=FACE_BOUND('',#619,.F.);+#619=EDGE_LOOP('',(#620,#626,#627,#633));+#620=ORIENTED_EDGE('',*,*,#621,.F.);+#621=EDGE_CURVE('',#209,#622,#624,.T.);+#622=VERTEX_POINT('',#623);+#623=CARTESIAN_POINT('',(1.55,-0.165,0.71));+#624=LINE('',#625,#27);+#625=CARTESIAN_POINT('',(1.4,-0.165,0.71));+#626=ORIENTED_EDGE('',*,*,#208,.T.);+#627=ORIENTED_EDGE('',*,*,#628,.T.);+#628=EDGE_CURVE('',#205,#629,#631,.T.);+#629=VERTEX_POINT('',#630);+#630=CARTESIAN_POINT('',(1.55,-0.485,0.71));+#631=LINE('',#632,#27);+#632=CARTESIAN_POINT('',(1.4,-0.485,0.71));+#633=ORIENTED_EDGE('',*,*,#634,.F.);+#634=EDGE_CURVE('',#622,#629,#635,.T.);+#635=LINE('',#623,#58);+#636=PLANE('',#637);+#637=AXIS2_PLACEMENT_3D('',#625,#13,#28);+#638=ADVANCED_FACE('',(#639),#537,.F.);+#639=FACE_BOUND('',#640,.F.);+#640=EDGE_LOOP('',(#641,#647,#648,#654));+#641=ORIENTED_EDGE('',*,*,#642,.F.);+#642=EDGE_CURVE('',#205,#643,#645,.T.);+#643=VERTEX_POINT('',#644);+#644=CARTESIAN_POINT('',(1.5,-0.485,0.89));+#645=LINE('',#646,#370);+#646=CARTESIAN_POINT('',(1.5,-0.485,0.627447714064));+#647=ORIENTED_EDGE('',*,*,#204,.T.);+#648=ORIENTED_EDGE('',*,*,#649,.T.);+#649=EDGE_CURVE('',#201,#650,#652,.T.);+#650=VERTEX_POINT('',#651);+#651=CARTESIAN_POINT('',(1.5,-0.815,0.89));+#652=LINE('',#653,#370);+#653=CARTESIAN_POINT('',(1.5,-0.815,0.627447714064));+#654=ORIENTED_EDGE('',*,*,#655,.F.);+#655=EDGE_CURVE('',#643,#650,#295,.T.);+#656=ADVANCED_FACE('',(#657),#675,.F.);+#657=FACE_BOUND('',#658,.F.);+#658=EDGE_LOOP('',(#659,#665,#666,#672));+#659=ORIENTED_EDGE('',*,*,#660,.F.);+#660=EDGE_CURVE('',#201,#661,#663,.T.);+#661=VERTEX_POINT('',#662);+#662=CARTESIAN_POINT('',(1.55,-0.815,0.71));+#663=LINE('',#664,#27);+#664=CARTESIAN_POINT('',(1.4,-0.815,0.71));+#665=ORIENTED_EDGE('',*,*,#200,.T.);+#666=ORIENTED_EDGE('',*,*,#667,.T.);+#667=EDGE_CURVE('',#196,#668,#670,.T.);+#668=VERTEX_POINT('',#669);+#669=CARTESIAN_POINT('',(1.55,-1.135,0.71));+#670=LINE('',#671,#27);+#671=CARTESIAN_POINT('',(1.4,-1.135,0.71));+#672=ORIENTED_EDGE('',*,*,#673,.F.);+#673=EDGE_CURVE('',#661,#668,#674,.T.);+#674=LINE('',#662,#58);+#675=PLANE('',#676);+#676=AXIS2_PLACEMENT_3D('',#664,#13,#28);+#677=ADVANCED_FACE('',(#678),#537,.F.);+#678=FACE_BOUND('',#679,.F.);+#679=EDGE_LOOP('',(#680,#686,#687,#692));+#680=ORIENTED_EDGE('',*,*,#681,.F.);+#681=EDGE_CURVE('',#196,#682,#684,.T.);+#682=VERTEX_POINT('',#683);+#683=CARTESIAN_POINT('',(1.5,-1.135,0.89));+#684=LINE('',#685,#370);+#685=CARTESIAN_POINT('',(1.5,-1.135,0.627447714064));+#686=ORIENTED_EDGE('',*,*,#195,.T.);+#687=ORIENTED_EDGE('',*,*,#688,.T.);+#688=EDGE_CURVE('',#191,#689,#691,.T.);+#689=VERTEX_POINT('',#690);+#690=CARTESIAN_POINT('',(1.5,-1.3,0.89));+#691=B_SPLINE_CURVE_WITH_KNOTS('',1,(#192,#690),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#692=ORIENTED_EDGE('',*,*,#693,.F.);+#693=EDGE_CURVE('',#682,#689,#295,.T.);+#694=ADVANCED_FACE('',(#695),#707,.F.);+#695=FACE_BOUND('',#696,.F.);+#696=EDGE_LOOP('',(#697,#698,#699,#704));+#697=ORIENTED_EDGE('',*,*,#236,.T.);+#698=ORIENTED_EDGE('',*,*,#360,.T.);+#699=ORIENTED_EDGE('',*,*,#700,.F.);+#700=EDGE_CURVE('',#701,#361,#703,.T.);+#701=VERTEX_POINT('',#702);+#702=CARTESIAN_POINT('',(-1.3,-1.5,0.89));+#703=LINE('',#702,#79);+#704=ORIENTED_EDGE('',*,*,#705,.F.);+#705=EDGE_CURVE('',#237,#701,#706,.T.);+#706=B_SPLINE_CURVE_WITH_KNOTS('',1,(#238,#702),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#707=PLANE('',#708);+#708=AXIS2_PLACEMENT_3D('',#702,#92,#80);+#709=ADVANCED_FACE('',(#710),#722,.F.);+#710=FACE_BOUND('',#711,.F.);+#711=EDGE_LOOP('',(#712,#713,#718,#721));+#712=ORIENTED_EDGE('',*,*,#253,.T.);+#713=ORIENTED_EDGE('',*,*,#714,.T.);+#714=EDGE_CURVE('',#249,#715,#717,.T.);+#715=VERTEX_POINT('',#716);+#716=CARTESIAN_POINT('',(1.3,-1.5,0.89));+#717=B_SPLINE_CURVE_WITH_KNOTS('',1,(#250,#716),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#718=ORIENTED_EDGE('',*,*,#719,.F.);+#719=EDGE_CURVE('',#689,#715,#720,.T.);+#720=LINE('',#690,#65);+#721=ORIENTED_EDGE('',*,*,#688,.F.);+#722=PLANE('',#723);+#723=AXIS2_PLACEMENT_3D('',#690,#80,#66);+#724=ADVANCED_FACE('',(#725),#733,.F.);+#725=FACE_BOUND('',#726,.F.);+#726=EDGE_LOOP('',(#727,#728,#729,#732));+#727=ORIENTED_EDGE('',*,*,#262,.T.);+#728=ORIENTED_EDGE('',*,*,#705,.T.);+#729=ORIENTED_EDGE('',*,*,#730,.F.);+#730=EDGE_CURVE('',#715,#701,#731,.T.);+#731=LINE('',#716,#72);+#732=ORIENTED_EDGE('',*,*,#714,.F.);+#733=PLANE('',#734);+#734=AXIS2_PLACEMENT_3D('',#716,#87,#73);+#735=ADVANCED_FACE('',(#736),#756,.F.);+#736=FACE_BOUND('',#737,.F.);+#737=EDGE_LOOP('',(#738,#743,#747,#749,#750,#754));+#738=ORIENTED_EDGE('',*,*,#739,.F.);+#739=EDGE_CURVE('',#740,#490,#742,.T.);+#740=VERTEX_POINT('',#741);+#741=CARTESIAN_POINT('',(-1.55,0.815,0.89));+#742=LINE('',#741,#334);+#743=ORIENTED_EDGE('',*,*,#744,.T.);+#744=EDGE_CURVE('',#740,#745,#746,.T.);+#745=VERTEX_POINT('',#333);+#746=LINE('',#741,#396);+#747=ORIENTED_EDGE('',*,*,#748,.T.);+#748=EDGE_CURVE('',#745,#330,#332,.T.);+#749=ORIENTED_EDGE('',*,*,#329,.T.);+#750=ORIENTED_EDGE('',*,*,#751,.F.);+#751=EDGE_CURVE('',#752,#324,#326,.T.);+#752=VERTEX_POINT('',#753);+#753=CARTESIAN_POINT('',(-1.45,0.815,0.89));+#754=ORIENTED_EDGE('',*,*,#755,.F.);+#755=EDGE_CURVE('',#490,#752,#742,.T.);+#756=PLANE('',#757);+#757=AXIS2_PLACEMENT_3D('',#741,#758,#335);+#758=DIRECTION('',(0.,0.,-1.));+#759=ADVANCED_FACE('',(#760),#804,.F.);+#760=FACE_BOUND('',#761,.F.);+#761=EDGE_LOOP('',(#762,#767,#771,#775,#779,#783,#787,#789,#790,#791,#796,#801));+#762=ORIENTED_EDGE('',*,*,#763,.T.);+#763=EDGE_CURVE('',#764,#765,#326,.T.);+#764=VERTEX_POINT('',#327);+#765=VERTEX_POINT('',#766);+#766=CARTESIAN_POINT('',(-1.45,-1.135,0.89));+#767=ORIENTED_EDGE('',*,*,#768,.T.);+#768=EDGE_CURVE('',#765,#769,#326,.T.);+#769=VERTEX_POINT('',#770);+#770=CARTESIAN_POINT('',(-1.45,-0.815,0.89));+#771=ORIENTED_EDGE('',*,*,#772,.T.);+#772=EDGE_CURVE('',#769,#773,#326,.T.);+#773=VERTEX_POINT('',#774);+#774=CARTESIAN_POINT('',(-1.45,-0.485,0.89));+#775=ORIENTED_EDGE('',*,*,#776,.T.);+#776=EDGE_CURVE('',#773,#777,#326,.T.);+#777=VERTEX_POINT('',#778);+#778=CARTESIAN_POINT('',(-1.45,-0.165,0.89));+#779=ORIENTED_EDGE('',*,*,#780,.T.);+#780=EDGE_CURVE('',#777,#781,#326,.T.);+#781=VERTEX_POINT('',#782);+#782=CARTESIAN_POINT('',(-1.45,0.165,0.89));+#783=ORIENTED_EDGE('',*,*,#784,.T.);+#784=EDGE_CURVE('',#781,#785,#326,.T.);+#785=VERTEX_POINT('',#786);+#786=CARTESIAN_POINT('',(-1.45,0.485,0.89));+#787=ORIENTED_EDGE('',*,*,#788,.T.);+#788=EDGE_CURVE('',#785,#752,#326,.T.);+#789=ORIENTED_EDGE('',*,*,#751,.T.);+#790=ORIENTED_EDGE('',*,*,#323,.T.);+#791=ORIENTED_EDGE('',*,*,#792,.T.);+#792=EDGE_CURVE('',#319,#793,#795,.T.);+#793=VERTEX_POINT('',#794);+#794=CARTESIAN_POINT('',(-1.352223981632,1.226111990816,1.35));+#795=B_SPLINE_CURVE_WITH_KNOTS('',1,(#320,#794),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#796=ORIENTED_EDGE('',*,*,#797,.F.);+#797=EDGE_CURVE('',#798,#793,#800,.T.);+#798=VERTEX_POINT('',#799);+#799=CARTESIAN_POINT('',(-1.352223981632,-1.226111990816,1.35));+#800=LINE('',#799,#86);+#801=ORIENTED_EDGE('',*,*,#802,.F.);+#802=EDGE_CURVE('',#764,#798,#803,.T.);+#803=B_SPLINE_CURVE_WITH_KNOTS('',1,(#327,#799),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#804=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#327,#799),(#320,#794)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.55),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#805=ADVANCED_FACE('',(#806),#818,.F.);+#806=FACE_BOUND('',#807,.F.);+#807=EDGE_LOOP('',(#808,#809,#814,#817));+#808=ORIENTED_EDGE('',*,*,#318,.T.);+#809=ORIENTED_EDGE('',*,*,#810,.T.);+#810=EDGE_CURVE('',#314,#811,#813,.T.);+#811=VERTEX_POINT('',#812);+#812=CARTESIAN_POINT('',(-1.226111990816,1.352223981632,1.35));+#813=B_SPLINE_CURVE_WITH_KNOTS('',1,(#315,#812),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#814=ORIENTED_EDGE('',*,*,#815,.F.);+#815=EDGE_CURVE('',#793,#811,#816,.T.);+#816=LINE('',#794,#91);+#817=ORIENTED_EDGE('',*,*,#792,.F.);+#818=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#320,#794),(#315,#812)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#819=ADVANCED_FACE('',(#820),#832,.F.);+#820=FACE_BOUND('',#821,.F.);+#821=EDGE_LOOP('',(#822,#823,#828,#831));+#822=ORIENTED_EDGE('',*,*,#313,.T.);+#823=ORIENTED_EDGE('',*,*,#824,.T.);+#824=EDGE_CURVE('',#309,#825,#827,.T.);+#825=VERTEX_POINT('',#826);+#826=CARTESIAN_POINT('',(1.226111990816,1.352223981632,1.35));+#827=B_SPLINE_CURVE_WITH_KNOTS('',1,(#310,#826),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#828=ORIENTED_EDGE('',*,*,#829,.F.);+#829=EDGE_CURVE('',#811,#825,#830,.T.);+#830=LINE('',#812,#27);+#831=ORIENTED_EDGE('',*,*,#810,.F.);+#832=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#315,#812),(#310,#826)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.55),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#833=ADVANCED_FACE('',(#834),#846,.F.);+#834=FACE_BOUND('',#835,.F.);+#835=EDGE_LOOP('',(#836,#837,#842,#845));+#836=ORIENTED_EDGE('',*,*,#308,.T.);+#837=ORIENTED_EDGE('',*,*,#838,.T.);+#838=EDGE_CURVE('',#304,#839,#841,.T.);+#839=VERTEX_POINT('',#840);+#840=CARTESIAN_POINT('',(1.352223981632,1.226111990816,1.35));+#841=B_SPLINE_CURVE_WITH_KNOTS('',1,(#305,#840),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#842=ORIENTED_EDGE('',*,*,#843,.F.);+#843=EDGE_CURVE('',#825,#839,#844,.T.);+#844=LINE('',#826,#51);+#845=ORIENTED_EDGE('',*,*,#824,.F.);+#846=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#310,#826),(#305,#840)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#847=ADVANCED_FACE('',(#848),#892,.F.);+#848=FACE_BOUND('',#849,.F.);+#849=EDGE_LOOP('',(#850,#851,#855,#859,#863,#867,#871,#875,#879,#883,#888,#891));+#850=ORIENTED_EDGE('',*,*,#303,.T.);+#851=ORIENTED_EDGE('',*,*,#852,.T.);+#852=EDGE_CURVE('',#298,#853,#306,.T.);+#853=VERTEX_POINT('',#854);+#854=CARTESIAN_POINT('',(1.45,0.815,0.89));+#855=ORIENTED_EDGE('',*,*,#856,.T.);+#856=EDGE_CURVE('',#853,#857,#306,.T.);+#857=VERTEX_POINT('',#858);+#858=CARTESIAN_POINT('',(1.45,0.485,0.89));+#859=ORIENTED_EDGE('',*,*,#860,.T.);+#860=EDGE_CURVE('',#857,#861,#306,.T.);+#861=VERTEX_POINT('',#862);+#862=CARTESIAN_POINT('',(1.45,0.165,0.89));+#863=ORIENTED_EDGE('',*,*,#864,.T.);+#864=EDGE_CURVE('',#861,#865,#306,.T.);+#865=VERTEX_POINT('',#866);+#866=CARTESIAN_POINT('',(1.45,-0.165,0.89));+#867=ORIENTED_EDGE('',*,*,#868,.T.);+#868=EDGE_CURVE('',#865,#869,#306,.T.);+#869=VERTEX_POINT('',#870);+#870=CARTESIAN_POINT('',(1.45,-0.485,0.89));+#871=ORIENTED_EDGE('',*,*,#872,.T.);+#872=EDGE_CURVE('',#869,#873,#306,.T.);+#873=VERTEX_POINT('',#874);+#874=CARTESIAN_POINT('',(1.45,-0.815,0.89));+#875=ORIENTED_EDGE('',*,*,#876,.T.);+#876=EDGE_CURVE('',#873,#877,#306,.T.);+#877=VERTEX_POINT('',#878);+#878=CARTESIAN_POINT('',(1.45,-1.135,0.89));+#879=ORIENTED_EDGE('',*,*,#880,.T.);+#880=EDGE_CURVE('',#877,#881,#306,.T.);+#881=VERTEX_POINT('',#882);+#882=CARTESIAN_POINT('',(1.45,-1.275,0.89));+#883=ORIENTED_EDGE('',*,*,#884,.T.);+#884=EDGE_CURVE('',#881,#885,#887,.T.);+#885=VERTEX_POINT('',#886);+#886=CARTESIAN_POINT('',(1.352223981632,-1.226111990816,1.35));+#887=B_SPLINE_CURVE_WITH_KNOTS('',1,(#882,#886),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#888=ORIENTED_EDGE('',*,*,#889,.F.);+#889=EDGE_CURVE('',#839,#885,#890,.T.);+#890=LINE('',#840,#58);+#891=ORIENTED_EDGE('',*,*,#838,.F.);+#892=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#305,#840),(#882,#886)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.55),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#893=ADVANCED_FACE('',(#894),#911,.F.);+#894=FACE_BOUND('',#895,.F.);+#895=EDGE_LOOP('',(#896,#899,#904,#907,#909,#910));+#896=ORIENTED_EDGE('',*,*,#897,.F.);+#897=EDGE_CURVE('',#898,#293,#300,.T.);+#898=VERTEX_POINT('',#301);+#899=ORIENTED_EDGE('',*,*,#900,.T.);+#900=EDGE_CURVE('',#898,#901,#903,.T.);+#901=VERTEX_POINT('',#902);+#902=CARTESIAN_POINT('',(1.55,0.815,0.89));+#903=LINE('',#301,#58);+#904=ORIENTED_EDGE('',*,*,#905,.T.);+#905=EDGE_CURVE('',#901,#565,#906,.T.);+#906=LINE('',#902,#72);+#907=ORIENTED_EDGE('',*,*,#908,.T.);+#908=EDGE_CURVE('',#565,#853,#906,.T.);+#909=ORIENTED_EDGE('',*,*,#852,.F.);+#910=ORIENTED_EDGE('',*,*,#297,.F.);+#911=PLANE('',#912);+#912=AXIS2_PLACEMENT_3D('',#301,#758,#73);+#913=ADVANCED_FACE('',(#914),#340,.F.);+#914=FACE_BOUND('',#915,.F.);+#915=EDGE_LOOP('',(#916,#917,#921,#922,#927,#932,#935,#936,#940,#941,#942,#943));+#916=ORIENTED_EDGE('',*,*,#372,.T.);+#917=ORIENTED_EDGE('',*,*,#918,.T.);+#918=EDGE_CURVE('',#366,#765,#919,.T.);+#919=LINE('',#920,#334);+#920=CARTESIAN_POINT('',(-1.55,-1.135,0.89));+#921=ORIENTED_EDGE('',*,*,#763,.F.);+#922=ORIENTED_EDGE('',*,*,#923,.F.);+#923=EDGE_CURVE('',#924,#764,#926,.T.);+#924=VERTEX_POINT('',#925);+#925=CARTESIAN_POINT('',(-1.275,-1.45,0.89));+#926=LINE('',#925,#79);+#927=ORIENTED_EDGE('',*,*,#928,.F.);+#928=EDGE_CURVE('',#929,#924,#931,.T.);+#929=VERTEX_POINT('',#930);+#930=CARTESIAN_POINT('',(1.275,-1.45,0.89));+#931=LINE('',#930,#72);+#932=ORIENTED_EDGE('',*,*,#933,.F.);+#933=EDGE_CURVE('',#881,#929,#934,.T.);+#934=LINE('',#882,#65);+#935=ORIENTED_EDGE('',*,*,#880,.F.);+#936=ORIENTED_EDGE('',*,*,#937,.F.);+#937=EDGE_CURVE('',#682,#877,#938,.T.);+#938=LINE('',#939,#72);+#939=CARTESIAN_POINT('',(1.55,-1.135,0.89));+#940=ORIENTED_EDGE('',*,*,#693,.T.);+#941=ORIENTED_EDGE('',*,*,#719,.T.);+#942=ORIENTED_EDGE('',*,*,#730,.T.);+#943=ORIENTED_EDGE('',*,*,#700,.T.);+#944=ADVANCED_FACE('',(#945),#1012,.F.);+#945=FACE_BOUND('',#946,.F.);+#946=EDGE_LOOP('',(#947,#948,#949,#957,#964,#973,#978,#983,#988,#996,#1003,#1010));+#947=ORIENTED_EDGE('',*,*,#365,.F.);+#948=ORIENTED_EDGE('',*,*,#379,.T.);+#949=ORIENTED_EDGE('',*,*,#950,.T.);+#950=EDGE_CURVE('',#380,#951,#953,.T.);+#951=VERTEX_POINT('',#952);+#952=CARTESIAN_POINT('',(-1.599240387651,-1.135,0.668682408883));+#953=CIRCLE('',#954,5.E-02);+#954=AXIS2_PLACEMENT_3D('',#955,#956,#13);+#955=CARTESIAN_POINT('',(-1.55,-1.135,0.66));+#956=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#957=ORIENTED_EDGE('',*,*,#958,.T.);+#958=EDGE_CURVE('',#951,#959,#961,.T.);+#959=VERTEX_POINT('',#960);+#960=CARTESIAN_POINT('',(-1.679314818512,-1.135,0.190060919137));+#961=LINE('',#952,#962);+#962=VECTOR('',#963,1.);+#963=DIRECTION('',(-0.16500884159,1.888093448421E-18,-0.986292087668));+#964=ORIENTED_EDGE('',*,*,#965,.T.);+#965=EDGE_CURVE('',#959,#966,#968,.T.);+#966=VERTEX_POINT('',#967);+#967=CARTESIAN_POINT('',(-1.905820601705,-1.135,-1.110223024625E-16));+#968=CIRCLE('',#969,0.23);+#969=AXIS2_PLACEMENT_3D('',#970,#971,#972);+#970=CARTESIAN_POINT('',(-1.905820601705,-1.135,0.23));+#971=DIRECTION('',(1.144237745222E-17,1.,1.925929944387E-33));+#972=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#973=ORIENTED_EDGE('',*,*,#974,.T.);+#974=EDGE_CURVE('',#966,#975,#977,.T.);+#975=VERTEX_POINT('',#976);+#976=CARTESIAN_POINT('',(-2.45,-1.135,-1.110223024625E-16));+#977=LINE('',#967,#384);+#978=ORIENTED_EDGE('',*,*,#979,.T.);+#979=EDGE_CURVE('',#975,#980,#982,.T.);+#980=VERTEX_POINT('',#981);+#981=CARTESIAN_POINT('',(-2.45,-1.135,0.18));+#982=LINE('',#976,#370);+#983=ORIENTED_EDGE('',*,*,#984,.T.);+#984=EDGE_CURVE('',#980,#985,#987,.T.);+#985=VERTEX_POINT('',#986);+#986=CARTESIAN_POINT('',(-1.905820601705,-1.135,0.18));+#987=LINE('',#981,#334);+#988=ORIENTED_EDGE('',*,*,#989,.T.);+#989=EDGE_CURVE('',#985,#990,#992,.T.);+#990=VERTEX_POINT('',#991);+#991=CARTESIAN_POINT('',(-1.856580214054,-1.135,0.221317591117));+#992=CIRCLE('',#993,5.E-02);+#993=AXIS2_PLACEMENT_3D('',#970,#994,#995);+#994=DIRECTION('',(-1.144237745222E-17,-1.,2.189528850508E-47));+#995=DIRECTION('',(-4.440892098501E-15,5.081436361562E-32,-1.));+#996=ORIENTED_EDGE('',*,*,#997,.T.);+#997=EDGE_CURVE('',#990,#998,#1000,.T.);+#998=VERTEX_POINT('',#999);+#999=CARTESIAN_POINT('',(-1.776505783193,-1.135,0.699939080863));+#1000=LINE('',#991,#1001);+#1001=VECTOR('',#1002,1.);+#1002=DIRECTION('',(0.16500884159,-1.888093448421E-18,0.986292087668));+#1003=ORIENTED_EDGE('',*,*,#1004,.T.);+#1004=EDGE_CURVE('',#998,#1005,#1006,.T.);+#1005=VERTEX_POINT('',#920);+#1006=CIRCLE('',#1007,0.23);+#1007=AXIS2_PLACEMENT_3D('',#955,#1008,#1009);+#1008=DIRECTION('',(1.144237745222E-17,1.,-3.851859888774E-34));+#1009=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#1010=ORIENTED_EDGE('',*,*,#1011,.T.);+#1011=EDGE_CURVE('',#1005,#366,#919,.T.);+#1012=PLANE('',#1013);+#1013=AXIS2_PLACEMENT_3D('',#1014,#397,#13);+#1014=CARTESIAN_POINT('',(-1.866683009871,-1.135,0.364895428128));+#1015=ADVANCED_FACE('',(#1016),#1030,.F.);+#1016=FACE_BOUND('',#1017,.F.);+#1017=EDGE_LOOP('',(#1018,#1019,#1026,#1029));+#1018=ORIENTED_EDGE('',*,*,#394,.T.);+#1019=ORIENTED_EDGE('',*,*,#1020,.T.);+#1020=EDGE_CURVE('',#389,#1021,#1023,.T.);+#1021=VERTEX_POINT('',#1022);+#1022=CARTESIAN_POINT('',(-1.599240387651,-0.815,0.668682408883));+#1023=CIRCLE('',#1024,5.E-02);+#1024=AXIS2_PLACEMENT_3D('',#1025,#956,#13);+#1025=CARTESIAN_POINT('',(-1.55,-0.815,0.66));+#1026=ORIENTED_EDGE('',*,*,#1027,.F.);+#1027=EDGE_CURVE('',#951,#1021,#1028,.T.);+#1028=LINE('',#952,#396);+#1029=ORIENTED_EDGE('',*,*,#950,.F.);+#1030=CYLINDRICAL_SURFACE('',#954,5.E-02);+#1031=ADVANCED_FACE('',(#1032),#1081,.T.);+#1032=FACE_BOUND('',#1033,.T.);+#1033=EDGE_LOOP('',(#403,#387,#1019,#1034,#1039,#1046,#1051,#1056,#1061,#1067,#1072,#1078));+#1034=ORIENTED_EDGE('',*,*,#1035,.T.);+#1035=EDGE_CURVE('',#1021,#1036,#1038,.T.);+#1036=VERTEX_POINT('',#1037);+#1037=CARTESIAN_POINT('',(-1.679314818512,-0.815,0.190060919137));+#1038=LINE('',#1022,#962);+#1039=ORIENTED_EDGE('',*,*,#1040,.T.);+#1040=EDGE_CURVE('',#1036,#1041,#1043,.T.);+#1041=VERTEX_POINT('',#1042);+#1042=CARTESIAN_POINT('',(-1.905820601705,-0.815,-1.110223024625E-16));+#1043=CIRCLE('',#1044,0.23);+#1044=AXIS2_PLACEMENT_3D('',#1045,#971,#972);+#1045=CARTESIAN_POINT('',(-1.905820601705,-0.815,0.23));+#1046=ORIENTED_EDGE('',*,*,#1047,.T.);+#1047=EDGE_CURVE('',#1041,#1048,#1050,.T.);+#1048=VERTEX_POINT('',#1049);+#1049=CARTESIAN_POINT('',(-2.45,-0.815,-1.110223024625E-16));+#1050=LINE('',#1042,#384);+#1051=ORIENTED_EDGE('',*,*,#1052,.T.);+#1052=EDGE_CURVE('',#1048,#1053,#1055,.T.);+#1053=VERTEX_POINT('',#1054);+#1054=CARTESIAN_POINT('',(-2.45,-0.815,0.18));+#1055=LINE('',#1049,#370);+#1056=ORIENTED_EDGE('',*,*,#1057,.T.);+#1057=EDGE_CURVE('',#1053,#1058,#1060,.T.);+#1058=VERTEX_POINT('',#1059);+#1059=CARTESIAN_POINT('',(-1.905820601705,-0.815,0.18));+#1060=LINE('',#1054,#334);+#1061=ORIENTED_EDGE('',*,*,#1062,.T.);+#1062=EDGE_CURVE('',#1058,#1063,#1065,.T.);+#1063=VERTEX_POINT('',#1064);+#1064=CARTESIAN_POINT('',(-1.856580214054,-0.815,0.221317591117));+#1065=CIRCLE('',#1066,5.E-02);+#1066=AXIS2_PLACEMENT_3D('',#1045,#994,#995);+#1067=ORIENTED_EDGE('',*,*,#1068,.T.);+#1068=EDGE_CURVE('',#1063,#1069,#1071,.T.);+#1069=VERTEX_POINT('',#1070);+#1070=CARTESIAN_POINT('',(-1.776505783193,-0.815,0.699939080863));+#1071=LINE('',#1064,#1001);+#1072=ORIENTED_EDGE('',*,*,#1073,.T.);+#1073=EDGE_CURVE('',#1069,#1074,#1076,.T.);+#1074=VERTEX_POINT('',#1075);+#1075=CARTESIAN_POINT('',(-1.55,-0.815,0.89));+#1076=CIRCLE('',#1077,0.23);+#1077=AXIS2_PLACEMENT_3D('',#1025,#1008,#1009);+#1078=ORIENTED_EDGE('',*,*,#1079,.T.);+#1079=EDGE_CURVE('',#1074,#405,#1080,.T.);+#1080=LINE('',#1075,#334);+#1081=PLANE('',#1082);+#1082=AXIS2_PLACEMENT_3D('',#1083,#397,#13);+#1083=CARTESIAN_POINT('',(-1.866683009871,-0.815,0.364895428128));+#1084=ADVANCED_FACE('',(#1085),#340,.F.);+#1085=FACE_BOUND('',#1086,.F.);+#1086=EDGE_LOOP('',(#1087,#1088,#1092,#1093));+#1087=ORIENTED_EDGE('',*,*,#417,.T.);+#1088=ORIENTED_EDGE('',*,*,#1089,.T.);+#1089=EDGE_CURVE('',#412,#773,#1090,.T.);+#1090=LINE('',#1091,#334);+#1091=CARTESIAN_POINT('',(-1.55,-0.485,0.89));+#1092=ORIENTED_EDGE('',*,*,#772,.F.);+#1093=ORIENTED_EDGE('',*,*,#1094,.F.);+#1094=EDGE_CURVE('',#405,#769,#1080,.T.);+#1095=ADVANCED_FACE('',(#1096),#1152,.F.);+#1096=FACE_BOUND('',#1097,.F.);+#1097=EDGE_LOOP('',(#1098,#1099,#1100,#1107,#1112,#1119,#1124,#1129,#1134,#1140,#1145,#1150));+#1098=ORIENTED_EDGE('',*,*,#411,.F.);+#1099=ORIENTED_EDGE('',*,*,#422,.T.);+#1100=ORIENTED_EDGE('',*,*,#1101,.T.);+#1101=EDGE_CURVE('',#423,#1102,#1104,.T.);+#1102=VERTEX_POINT('',#1103);+#1103=CARTESIAN_POINT('',(-1.599240387651,-0.485,0.668682408883));+#1104=CIRCLE('',#1105,5.E-02);+#1105=AXIS2_PLACEMENT_3D('',#1106,#956,#13);+#1106=CARTESIAN_POINT('',(-1.55,-0.485,0.66));+#1107=ORIENTED_EDGE('',*,*,#1108,.T.);+#1108=EDGE_CURVE('',#1102,#1109,#1111,.T.);+#1109=VERTEX_POINT('',#1110);+#1110=CARTESIAN_POINT('',(-1.679314818512,-0.485,0.190060919137));+#1111=LINE('',#1103,#962);+#1112=ORIENTED_EDGE('',*,*,#1113,.T.);+#1113=EDGE_CURVE('',#1109,#1114,#1116,.T.);+#1114=VERTEX_POINT('',#1115);+#1115=CARTESIAN_POINT('',(-1.905820601705,-0.485,-1.110223024625E-16));+#1116=CIRCLE('',#1117,0.23);+#1117=AXIS2_PLACEMENT_3D('',#1118,#971,#972);+#1118=CARTESIAN_POINT('',(-1.905820601705,-0.485,0.23));+#1119=ORIENTED_EDGE('',*,*,#1120,.T.);+#1120=EDGE_CURVE('',#1114,#1121,#1123,.T.);+#1121=VERTEX_POINT('',#1122);+#1122=CARTESIAN_POINT('',(-2.45,-0.485,-1.110223024625E-16));+#1123=LINE('',#1115,#384);+#1124=ORIENTED_EDGE('',*,*,#1125,.T.);+#1125=EDGE_CURVE('',#1121,#1126,#1128,.T.);+#1126=VERTEX_POINT('',#1127);+#1127=CARTESIAN_POINT('',(-2.45,-0.485,0.18));+#1128=LINE('',#1122,#370);+#1129=ORIENTED_EDGE('',*,*,#1130,.T.);+#1130=EDGE_CURVE('',#1126,#1131,#1133,.T.);+#1131=VERTEX_POINT('',#1132);+#1132=CARTESIAN_POINT('',(-1.905820601705,-0.485,0.18));+#1133=LINE('',#1127,#334);+#1134=ORIENTED_EDGE('',*,*,#1135,.T.);+#1135=EDGE_CURVE('',#1131,#1136,#1138,.T.);+#1136=VERTEX_POINT('',#1137);+#1137=CARTESIAN_POINT('',(-1.856580214054,-0.485,0.221317591117));+#1138=CIRCLE('',#1139,5.E-02);+#1139=AXIS2_PLACEMENT_3D('',#1118,#994,#995);+#1140=ORIENTED_EDGE('',*,*,#1141,.T.);+#1141=EDGE_CURVE('',#1136,#1142,#1144,.T.);+#1142=VERTEX_POINT('',#1143);+#1143=CARTESIAN_POINT('',(-1.776505783193,-0.485,0.699939080863));+#1144=LINE('',#1137,#1001);+#1145=ORIENTED_EDGE('',*,*,#1146,.T.);+#1146=EDGE_CURVE('',#1142,#1147,#1148,.T.);+#1147=VERTEX_POINT('',#1091);+#1148=CIRCLE('',#1149,0.23);+#1149=AXIS2_PLACEMENT_3D('',#1106,#1008,#1009);+#1150=ORIENTED_EDGE('',*,*,#1151,.T.);+#1151=EDGE_CURVE('',#1147,#412,#1090,.T.);+#1152=PLANE('',#1153);+#1153=AXIS2_PLACEMENT_3D('',#1154,#397,#13);+#1154=CARTESIAN_POINT('',(-1.866683009871,-0.485,0.364895428128));+#1155=ADVANCED_FACE('',(#1156),#1170,.F.);+#1156=FACE_BOUND('',#1157,.F.);+#1157=EDGE_LOOP('',(#1158,#1159,#1166,#1169));+#1158=ORIENTED_EDGE('',*,*,#435,.T.);+#1159=ORIENTED_EDGE('',*,*,#1160,.T.);+#1160=EDGE_CURVE('',#430,#1161,#1163,.T.);+#1161=VERTEX_POINT('',#1162);+#1162=CARTESIAN_POINT('',(-1.599240387651,-0.165,0.668682408883));+#1163=CIRCLE('',#1164,5.E-02);+#1164=AXIS2_PLACEMENT_3D('',#1165,#956,#13);+#1165=CARTESIAN_POINT('',(-1.55,-0.165,0.66));+#1166=ORIENTED_EDGE('',*,*,#1167,.F.);+#1167=EDGE_CURVE('',#1102,#1161,#1168,.T.);+#1168=LINE('',#1103,#396);+#1169=ORIENTED_EDGE('',*,*,#1101,.F.);+#1170=CYLINDRICAL_SURFACE('',#1105,5.E-02);+#1171=ADVANCED_FACE('',(#1172),#1221,.T.);+#1172=FACE_BOUND('',#1173,.T.);+#1173=EDGE_LOOP('',(#442,#428,#1159,#1174,#1179,#1186,#1191,#1196,#1201,#1207,#1212,#1218));+#1174=ORIENTED_EDGE('',*,*,#1175,.T.);+#1175=EDGE_CURVE('',#1161,#1176,#1178,.T.);+#1176=VERTEX_POINT('',#1177);+#1177=CARTESIAN_POINT('',(-1.679314818512,-0.165,0.190060919137));+#1178=LINE('',#1162,#962);+#1179=ORIENTED_EDGE('',*,*,#1180,.T.);+#1180=EDGE_CURVE('',#1176,#1181,#1183,.T.);+#1181=VERTEX_POINT('',#1182);+#1182=CARTESIAN_POINT('',(-1.905820601705,-0.165,-1.110223024625E-16));+#1183=CIRCLE('',#1184,0.23);+#1184=AXIS2_PLACEMENT_3D('',#1185,#971,#972);+#1185=CARTESIAN_POINT('',(-1.905820601705,-0.165,0.23));+#1186=ORIENTED_EDGE('',*,*,#1187,.T.);+#1187=EDGE_CURVE('',#1181,#1188,#1190,.T.);+#1188=VERTEX_POINT('',#1189);+#1189=CARTESIAN_POINT('',(-2.45,-0.165,-1.110223024625E-16));+#1190=LINE('',#1182,#384);+#1191=ORIENTED_EDGE('',*,*,#1192,.T.);+#1192=EDGE_CURVE('',#1188,#1193,#1195,.T.);+#1193=VERTEX_POINT('',#1194);+#1194=CARTESIAN_POINT('',(-2.45,-0.165,0.18));+#1195=LINE('',#1189,#370);+#1196=ORIENTED_EDGE('',*,*,#1197,.T.);+#1197=EDGE_CURVE('',#1193,#1198,#1200,.T.);+#1198=VERTEX_POINT('',#1199);+#1199=CARTESIAN_POINT('',(-1.905820601705,-0.165,0.18));+#1200=LINE('',#1194,#334);+#1201=ORIENTED_EDGE('',*,*,#1202,.T.);+#1202=EDGE_CURVE('',#1198,#1203,#1205,.T.);+#1203=VERTEX_POINT('',#1204);+#1204=CARTESIAN_POINT('',(-1.856580214054,-0.165,0.221317591117));+#1205=CIRCLE('',#1206,5.E-02);+#1206=AXIS2_PLACEMENT_3D('',#1185,#994,#995);+#1207=ORIENTED_EDGE('',*,*,#1208,.T.);+#1208=EDGE_CURVE('',#1203,#1209,#1211,.T.);+#1209=VERTEX_POINT('',#1210);+#1210=CARTESIAN_POINT('',(-1.776505783193,-0.165,0.699939080863));+#1211=LINE('',#1204,#1001);+#1212=ORIENTED_EDGE('',*,*,#1213,.T.);+#1213=EDGE_CURVE('',#1209,#1214,#1216,.T.);+#1214=VERTEX_POINT('',#1215);+#1215=CARTESIAN_POINT('',(-1.55,-0.165,0.89));+#1216=CIRCLE('',#1217,0.23);+#1217=AXIS2_PLACEMENT_3D('',#1165,#1008,#1009);+#1218=ORIENTED_EDGE('',*,*,#1219,.T.);+#1219=EDGE_CURVE('',#1214,#444,#1220,.T.);+#1220=LINE('',#1215,#334);+#1221=PLANE('',#1222);+#1222=AXIS2_PLACEMENT_3D('',#1223,#397,#13);+#1223=CARTESIAN_POINT('',(-1.866683009871,-0.165,0.364895428128));+#1224=ADVANCED_FACE('',(#1225),#340,.F.);+#1225=FACE_BOUND('',#1226,.F.);+#1226=EDGE_LOOP('',(#1227,#1228,#1232,#1233));+#1227=ORIENTED_EDGE('',*,*,#456,.T.);+#1228=ORIENTED_EDGE('',*,*,#1229,.T.);+#1229=EDGE_CURVE('',#451,#781,#1230,.T.);+#1230=LINE('',#1231,#334);+#1231=CARTESIAN_POINT('',(-1.55,0.165,0.89));+#1232=ORIENTED_EDGE('',*,*,#780,.F.);+#1233=ORIENTED_EDGE('',*,*,#1234,.F.);+#1234=EDGE_CURVE('',#444,#777,#1220,.T.);+#1235=ADVANCED_FACE('',(#1236),#1292,.F.);+#1236=FACE_BOUND('',#1237,.F.);+#1237=EDGE_LOOP('',(#1238,#1239,#1240,#1247,#1252,#1259,#1264,#1269,#1274,#1280,#1285,#1290));+#1238=ORIENTED_EDGE('',*,*,#450,.F.);+#1239=ORIENTED_EDGE('',*,*,#461,.T.);+#1240=ORIENTED_EDGE('',*,*,#1241,.T.);+#1241=EDGE_CURVE('',#462,#1242,#1244,.T.);+#1242=VERTEX_POINT('',#1243);+#1243=CARTESIAN_POINT('',(-1.599240387651,0.165,0.668682408883));+#1244=CIRCLE('',#1245,5.E-02);+#1245=AXIS2_PLACEMENT_3D('',#1246,#956,#13);+#1246=CARTESIAN_POINT('',(-1.55,0.165,0.66));+#1247=ORIENTED_EDGE('',*,*,#1248,.T.);+#1248=EDGE_CURVE('',#1242,#1249,#1251,.T.);+#1249=VERTEX_POINT('',#1250);+#1250=CARTESIAN_POINT('',(-1.679314818512,0.165,0.190060919137));+#1251=LINE('',#1243,#962);+#1252=ORIENTED_EDGE('',*,*,#1253,.T.);+#1253=EDGE_CURVE('',#1249,#1254,#1256,.T.);+#1254=VERTEX_POINT('',#1255);+#1255=CARTESIAN_POINT('',(-1.905820601705,0.165,-1.110223024625E-16));+#1256=CIRCLE('',#1257,0.23);+#1257=AXIS2_PLACEMENT_3D('',#1258,#971,#972);+#1258=CARTESIAN_POINT('',(-1.905820601705,0.165,0.23));+#1259=ORIENTED_EDGE('',*,*,#1260,.T.);+#1260=EDGE_CURVE('',#1254,#1261,#1263,.T.);+#1261=VERTEX_POINT('',#1262);+#1262=CARTESIAN_POINT('',(-2.45,0.165,-1.110223024625E-16));+#1263=LINE('',#1255,#384);+#1264=ORIENTED_EDGE('',*,*,#1265,.T.);+#1265=EDGE_CURVE('',#1261,#1266,#1268,.T.);+#1266=VERTEX_POINT('',#1267);+#1267=CARTESIAN_POINT('',(-2.45,0.165,0.18));+#1268=LINE('',#1262,#370);+#1269=ORIENTED_EDGE('',*,*,#1270,.T.);+#1270=EDGE_CURVE('',#1266,#1271,#1273,.T.);+#1271=VERTEX_POINT('',#1272);+#1272=CARTESIAN_POINT('',(-1.905820601705,0.165,0.18));+#1273=LINE('',#1267,#334);+#1274=ORIENTED_EDGE('',*,*,#1275,.T.);+#1275=EDGE_CURVE('',#1271,#1276,#1278,.T.);+#1276=VERTEX_POINT('',#1277);+#1277=CARTESIAN_POINT('',(-1.856580214054,0.165,0.221317591117));+#1278=CIRCLE('',#1279,5.E-02);+#1279=AXIS2_PLACEMENT_3D('',#1258,#994,#995);+#1280=ORIENTED_EDGE('',*,*,#1281,.T.);+#1281=EDGE_CURVE('',#1276,#1282,#1284,.T.);+#1282=VERTEX_POINT('',#1283);+#1283=CARTESIAN_POINT('',(-1.776505783193,0.165,0.699939080863));+#1284=LINE('',#1277,#1001);+#1285=ORIENTED_EDGE('',*,*,#1286,.T.);+#1286=EDGE_CURVE('',#1282,#1287,#1288,.T.);+#1287=VERTEX_POINT('',#1231);+#1288=CIRCLE('',#1289,0.23);+#1289=AXIS2_PLACEMENT_3D('',#1246,#1008,#1009);+#1290=ORIENTED_EDGE('',*,*,#1291,.T.);+#1291=EDGE_CURVE('',#1287,#451,#1230,.T.);+#1292=PLANE('',#1293);+#1293=AXIS2_PLACEMENT_3D('',#1294,#397,#13);+#1294=CARTESIAN_POINT('',(-1.866683009871,0.165,0.364895428128));+#1295=ADVANCED_FACE('',(#1296),#1310,.F.);+#1296=FACE_BOUND('',#1297,.F.);+#1297=EDGE_LOOP('',(#1298,#1299,#1306,#1309));+#1298=ORIENTED_EDGE('',*,*,#474,.T.);+#1299=ORIENTED_EDGE('',*,*,#1300,.T.);+#1300=EDGE_CURVE('',#469,#1301,#1303,.T.);+#1301=VERTEX_POINT('',#1302);+#1302=CARTESIAN_POINT('',(-1.599240387651,0.485,0.668682408883));+#1303=CIRCLE('',#1304,5.E-02);+#1304=AXIS2_PLACEMENT_3D('',#1305,#956,#13);+#1305=CARTESIAN_POINT('',(-1.55,0.485,0.66));+#1306=ORIENTED_EDGE('',*,*,#1307,.F.);+#1307=EDGE_CURVE('',#1242,#1301,#1308,.T.);+#1308=LINE('',#1243,#396);+#1309=ORIENTED_EDGE('',*,*,#1241,.F.);+#1310=CYLINDRICAL_SURFACE('',#1245,5.E-02);+#1311=ADVANCED_FACE('',(#1312),#1361,.T.);+#1312=FACE_BOUND('',#1313,.T.);+#1313=EDGE_LOOP('',(#481,#467,#1299,#1314,#1319,#1326,#1331,#1336,#1341,#1347,#1352,#1358));+#1314=ORIENTED_EDGE('',*,*,#1315,.T.);+#1315=EDGE_CURVE('',#1301,#1316,#1318,.T.);+#1316=VERTEX_POINT('',#1317);+#1317=CARTESIAN_POINT('',(-1.679314818512,0.485,0.190060919137));+#1318=LINE('',#1302,#962);+#1319=ORIENTED_EDGE('',*,*,#1320,.T.);+#1320=EDGE_CURVE('',#1316,#1321,#1323,.T.);+#1321=VERTEX_POINT('',#1322);+#1322=CARTESIAN_POINT('',(-1.905820601705,0.485,-1.110223024625E-16));+#1323=CIRCLE('',#1324,0.23);+#1324=AXIS2_PLACEMENT_3D('',#1325,#971,#972);+#1325=CARTESIAN_POINT('',(-1.905820601705,0.485,0.23));+#1326=ORIENTED_EDGE('',*,*,#1327,.T.);+#1327=EDGE_CURVE('',#1321,#1328,#1330,.T.);+#1328=VERTEX_POINT('',#1329);+#1329=CARTESIAN_POINT('',(-2.45,0.485,-1.110223024625E-16));+#1330=LINE('',#1322,#384);+#1331=ORIENTED_EDGE('',*,*,#1332,.T.);+#1332=EDGE_CURVE('',#1328,#1333,#1335,.T.);+#1333=VERTEX_POINT('',#1334);+#1334=CARTESIAN_POINT('',(-2.45,0.485,0.18));+#1335=LINE('',#1329,#370);+#1336=ORIENTED_EDGE('',*,*,#1337,.T.);+#1337=EDGE_CURVE('',#1333,#1338,#1340,.T.);+#1338=VERTEX_POINT('',#1339);+#1339=CARTESIAN_POINT('',(-1.905820601705,0.485,0.18));+#1340=LINE('',#1334,#334);+#1341=ORIENTED_EDGE('',*,*,#1342,.T.);+#1342=EDGE_CURVE('',#1338,#1343,#1345,.T.);+#1343=VERTEX_POINT('',#1344);+#1344=CARTESIAN_POINT('',(-1.856580214054,0.485,0.221317591117));+#1345=CIRCLE('',#1346,5.E-02);+#1346=AXIS2_PLACEMENT_3D('',#1325,#994,#995);+#1347=ORIENTED_EDGE('',*,*,#1348,.T.);+#1348=EDGE_CURVE('',#1343,#1349,#1351,.T.);+#1349=VERTEX_POINT('',#1350);+#1350=CARTESIAN_POINT('',(-1.776505783193,0.485,0.699939080863));+#1351=LINE('',#1344,#1001);+#1352=ORIENTED_EDGE('',*,*,#1353,.T.);+#1353=EDGE_CURVE('',#1349,#1354,#1356,.T.);+#1354=VERTEX_POINT('',#1355);+#1355=CARTESIAN_POINT('',(-1.55,0.485,0.89));+#1356=CIRCLE('',#1357,0.23);+#1357=AXIS2_PLACEMENT_3D('',#1305,#1008,#1009);+#1358=ORIENTED_EDGE('',*,*,#1359,.T.);+#1359=EDGE_CURVE('',#1354,#483,#1360,.T.);+#1360=LINE('',#1355,#334);+#1361=PLANE('',#1362);+#1362=AXIS2_PLACEMENT_3D('',#1363,#397,#13);+#1363=CARTESIAN_POINT('',(-1.866683009871,0.485,0.364895428128));+#1364=ADVANCED_FACE('',(#1365),#340,.F.);+#1365=FACE_BOUND('',#1366,.F.);+#1366=EDGE_LOOP('',(#1367,#1368,#1369,#1370));+#1367=ORIENTED_EDGE('',*,*,#495,.T.);+#1368=ORIENTED_EDGE('',*,*,#755,.T.);+#1369=ORIENTED_EDGE('',*,*,#788,.F.);+#1370=ORIENTED_EDGE('',*,*,#1371,.F.);+#1371=EDGE_CURVE('',#483,#785,#1360,.T.);+#1372=ADVANCED_FACE('',(#1373),#1427,.F.);+#1373=FACE_BOUND('',#1374,.F.);+#1374=EDGE_LOOP('',(#1375,#1376,#1377,#1384,#1389,#1396,#1401,#1406,#1411,#1417,#1422,#1426));+#1375=ORIENTED_EDGE('',*,*,#489,.F.);+#1376=ORIENTED_EDGE('',*,*,#500,.T.);+#1377=ORIENTED_EDGE('',*,*,#1378,.T.);+#1378=EDGE_CURVE('',#501,#1379,#1381,.T.);+#1379=VERTEX_POINT('',#1380);+#1380=CARTESIAN_POINT('',(-1.599240387651,0.815,0.668682408883));+#1381=CIRCLE('',#1382,5.E-02);+#1382=AXIS2_PLACEMENT_3D('',#1383,#956,#13);+#1383=CARTESIAN_POINT('',(-1.55,0.815,0.66));+#1384=ORIENTED_EDGE('',*,*,#1385,.T.);+#1385=EDGE_CURVE('',#1379,#1386,#1388,.T.);+#1386=VERTEX_POINT('',#1387);+#1387=CARTESIAN_POINT('',(-1.679314818512,0.815,0.190060919137));+#1388=LINE('',#1380,#962);+#1389=ORIENTED_EDGE('',*,*,#1390,.T.);+#1390=EDGE_CURVE('',#1386,#1391,#1393,.T.);+#1391=VERTEX_POINT('',#1392);+#1392=CARTESIAN_POINT('',(-1.905820601705,0.815,-1.110223024625E-16));+#1393=CIRCLE('',#1394,0.23);+#1394=AXIS2_PLACEMENT_3D('',#1395,#971,#972);+#1395=CARTESIAN_POINT('',(-1.905820601705,0.815,0.23));+#1396=ORIENTED_EDGE('',*,*,#1397,.T.);+#1397=EDGE_CURVE('',#1391,#1398,#1400,.T.);+#1398=VERTEX_POINT('',#1399);+#1399=CARTESIAN_POINT('',(-2.45,0.815,-1.110223024625E-16));+#1400=LINE('',#1392,#384);+#1401=ORIENTED_EDGE('',*,*,#1402,.T.);+#1402=EDGE_CURVE('',#1398,#1403,#1405,.T.);+#1403=VERTEX_POINT('',#1404);+#1404=CARTESIAN_POINT('',(-2.45,0.815,0.18));+#1405=LINE('',#1399,#370);+#1406=ORIENTED_EDGE('',*,*,#1407,.T.);+#1407=EDGE_CURVE('',#1403,#1408,#1410,.T.);+#1408=VERTEX_POINT('',#1409);+#1409=CARTESIAN_POINT('',(-1.905820601705,0.815,0.18));+#1410=LINE('',#1404,#334);+#1411=ORIENTED_EDGE('',*,*,#1412,.T.);+#1412=EDGE_CURVE('',#1408,#1413,#1415,.T.);+#1413=VERTEX_POINT('',#1414);+#1414=CARTESIAN_POINT('',(-1.856580214054,0.815,0.221317591117));+#1415=CIRCLE('',#1416,5.E-02);+#1416=AXIS2_PLACEMENT_3D('',#1395,#994,#995);+#1417=ORIENTED_EDGE('',*,*,#1418,.T.);+#1418=EDGE_CURVE('',#1413,#1419,#1421,.T.);+#1419=VERTEX_POINT('',#1420);+#1420=CARTESIAN_POINT('',(-1.776505783193,0.815,0.699939080863));+#1421=LINE('',#1414,#1001);+#1422=ORIENTED_EDGE('',*,*,#1423,.T.);+#1423=EDGE_CURVE('',#1419,#740,#1424,.T.);+#1424=CIRCLE('',#1425,0.23);+#1425=AXIS2_PLACEMENT_3D('',#1383,#1008,#1009);+#1426=ORIENTED_EDGE('',*,*,#739,.T.);+#1427=PLANE('',#1428);+#1428=AXIS2_PLACEMENT_3D('',#1429,#397,#13);+#1429=CARTESIAN_POINT('',(-1.866683009871,0.815,0.364895428128));+#1430=ADVANCED_FACE('',(#1431),#1445,.F.);+#1431=FACE_BOUND('',#1432,.F.);+#1432=EDGE_LOOP('',(#1433,#1434,#1441,#1444));+#1433=ORIENTED_EDGE('',*,*,#513,.T.);+#1434=ORIENTED_EDGE('',*,*,#1435,.T.);+#1435=EDGE_CURVE('',#508,#1436,#1438,.T.);+#1436=VERTEX_POINT('',#1437);+#1437=CARTESIAN_POINT('',(-1.599240387651,1.135,0.668682408883));+#1438=CIRCLE('',#1439,5.E-02);+#1439=AXIS2_PLACEMENT_3D('',#1440,#956,#13);+#1440=CARTESIAN_POINT('',(-1.55,1.135,0.66));+#1441=ORIENTED_EDGE('',*,*,#1442,.F.);+#1442=EDGE_CURVE('',#1379,#1436,#1443,.T.);+#1443=LINE('',#1380,#396);+#1444=ORIENTED_EDGE('',*,*,#1378,.F.);+#1445=CYLINDRICAL_SURFACE('',#1382,5.E-02);+#1446=ADVANCED_FACE('',(#1447),#1491,.T.);+#1447=FACE_BOUND('',#1448,.T.);+#1448=EDGE_LOOP('',(#520,#506,#1434,#1449,#1454,#1461,#1466,#1471,#1476,#1482,#1487,#747));+#1449=ORIENTED_EDGE('',*,*,#1450,.T.);+#1450=EDGE_CURVE('',#1436,#1451,#1453,.T.);+#1451=VERTEX_POINT('',#1452);+#1452=CARTESIAN_POINT('',(-1.679314818512,1.135,0.190060919137));+#1453=LINE('',#1437,#962);+#1454=ORIENTED_EDGE('',*,*,#1455,.T.);+#1455=EDGE_CURVE('',#1451,#1456,#1458,.T.);+#1456=VERTEX_POINT('',#1457);+#1457=CARTESIAN_POINT('',(-1.905820601705,1.135,-1.110223024625E-16));+#1458=CIRCLE('',#1459,0.23);+#1459=AXIS2_PLACEMENT_3D('',#1460,#971,#972);+#1460=CARTESIAN_POINT('',(-1.905820601705,1.135,0.23));+#1461=ORIENTED_EDGE('',*,*,#1462,.T.);+#1462=EDGE_CURVE('',#1456,#1463,#1465,.T.);+#1463=VERTEX_POINT('',#1464);+#1464=CARTESIAN_POINT('',(-2.45,1.135,-1.110223024625E-16));+#1465=LINE('',#1457,#384);+#1466=ORIENTED_EDGE('',*,*,#1467,.T.);+#1467=EDGE_CURVE('',#1463,#1468,#1470,.T.);+#1468=VERTEX_POINT('',#1469);+#1469=CARTESIAN_POINT('',(-2.45,1.135,0.18));+#1470=LINE('',#1464,#370);+#1471=ORIENTED_EDGE('',*,*,#1472,.T.);+#1472=EDGE_CURVE('',#1468,#1473,#1475,.T.);+#1473=VERTEX_POINT('',#1474);+#1474=CARTESIAN_POINT('',(-1.905820601705,1.135,0.18));+#1475=LINE('',#1469,#334);+#1476=ORIENTED_EDGE('',*,*,#1477,.T.);+#1477=EDGE_CURVE('',#1473,#1478,#1480,.T.);+#1478=VERTEX_POINT('',#1479);+#1479=CARTESIAN_POINT('',(-1.856580214054,1.135,0.221317591117));+#1480=CIRCLE('',#1481,5.E-02);+#1481=AXIS2_PLACEMENT_3D('',#1460,#994,#995);+#1482=ORIENTED_EDGE('',*,*,#1483,.T.);+#1483=EDGE_CURVE('',#1478,#1484,#1486,.T.);+#1484=VERTEX_POINT('',#1485);+#1485=CARTESIAN_POINT('',(-1.776505783193,1.135,0.699939080863));+#1486=LINE('',#1479,#1001);+#1487=ORIENTED_EDGE('',*,*,#1488,.T.);+#1488=EDGE_CURVE('',#1484,#745,#1489,.T.);+#1489=CIRCLE('',#1490,0.23);+#1490=AXIS2_PLACEMENT_3D('',#1440,#1008,#1009);+#1491=PLANE('',#1492);+#1492=AXIS2_PLACEMENT_3D('',#1493,#397,#13);+#1493=CARTESIAN_POINT('',(-1.866683009871,1.135,0.364895428128));+#1494=ADVANCED_FACE('',(#1495),#1556,.F.);+#1495=FACE_BOUND('',#1496,.F.);+#1496=EDGE_LOOP('',(#1497,#1498,#1499,#1506,#1513,#1521,#1526,#1531,#1536,#1543,#1550,#1555));+#1497=ORIENTED_EDGE('',*,*,#533,.F.);+#1498=ORIENTED_EDGE('',*,*,#543,.T.);+#1499=ORIENTED_EDGE('',*,*,#1500,.T.);+#1500=EDGE_CURVE('',#544,#1501,#1503,.T.);+#1501=VERTEX_POINT('',#1502);+#1502=CARTESIAN_POINT('',(1.599240387651,1.135,0.668682408883));+#1503=CIRCLE('',#1504,5.E-02);+#1504=AXIS2_PLACEMENT_3D('',#1505,#87,#13);+#1505=CARTESIAN_POINT('',(1.55,1.135,0.66));+#1506=ORIENTED_EDGE('',*,*,#1507,.T.);+#1507=EDGE_CURVE('',#1501,#1508,#1510,.T.);+#1508=VERTEX_POINT('',#1509);+#1509=CARTESIAN_POINT('',(1.679314818512,1.135,0.190060919137));+#1510=LINE('',#1502,#1511);+#1511=VECTOR('',#1512,1.);+#1512=DIRECTION('',(0.16500884159,1.831966151994E-17,-0.986292087668));+#1513=ORIENTED_EDGE('',*,*,#1514,.T.);+#1514=EDGE_CURVE('',#1508,#1515,#1517,.T.);+#1515=VERTEX_POINT('',#1516);+#1516=CARTESIAN_POINT('',(1.905820601705,1.135,-1.110223024625E-16));+#1517=CIRCLE('',#1518,0.23);+#1518=AXIS2_PLACEMENT_3D('',#1519,#59,#1520);+#1519=CARTESIAN_POINT('',(1.905820601705,1.135,0.23));+#1520=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#1521=ORIENTED_EDGE('',*,*,#1522,.T.);+#1522=EDGE_CURVE('',#1515,#1523,#1525,.T.);+#1523=VERTEX_POINT('',#1524);+#1524=CARTESIAN_POINT('',(2.45,1.135,-1.110223024625E-16));+#1525=LINE('',#1516,#27);+#1526=ORIENTED_EDGE('',*,*,#1527,.T.);+#1527=EDGE_CURVE('',#1523,#1528,#1530,.T.);+#1528=VERTEX_POINT('',#1529);+#1529=CARTESIAN_POINT('',(2.45,1.135,0.18));+#1530=LINE('',#1524,#370);+#1531=ORIENTED_EDGE('',*,*,#1532,.T.);+#1532=EDGE_CURVE('',#1528,#1533,#1535,.T.);+#1533=VERTEX_POINT('',#1534);+#1534=CARTESIAN_POINT('',(1.905820601705,1.135,0.18));+#1535=LINE('',#1529,#72);+#1536=ORIENTED_EDGE('',*,*,#1537,.T.);+#1537=EDGE_CURVE('',#1533,#1538,#1540,.T.);+#1538=VERTEX_POINT('',#1539);+#1539=CARTESIAN_POINT('',(1.856580214054,1.135,0.221317591117));+#1540=CIRCLE('',#1541,5.E-02);+#1541=AXIS2_PLACEMENT_3D('',#1519,#87,#1542);+#1542=DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.));+#1543=ORIENTED_EDGE('',*,*,#1544,.T.);+#1544=EDGE_CURVE('',#1538,#1545,#1547,.T.);+#1545=VERTEX_POINT('',#1546);+#1546=CARTESIAN_POINT('',(1.776505783193,1.135,0.699939080863));+#1547=LINE('',#1539,#1548);+#1548=VECTOR('',#1549,1.);+#1549=DIRECTION('',(-0.16500884159,-1.831966151994E-17,0.986292087668));+#1550=ORIENTED_EDGE('',*,*,#1551,.T.);+#1551=EDGE_CURVE('',#1545,#898,#1552,.T.);+#1552=CIRCLE('',#1553,0.23);+#1553=AXIS2_PLACEMENT_3D('',#1505,#59,#1554);+#1554=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#1555=ORIENTED_EDGE('',*,*,#897,.T.);+#1556=PLANE('',#1557);+#1557=AXIS2_PLACEMENT_3D('',#1558,#59,#13);+#1558=CARTESIAN_POINT('',(1.866683009871,1.135,0.364895428128));+#1559=ADVANCED_FACE('',(#1560),#1574,.F.);+#1560=FACE_BOUND('',#1561,.F.);+#1561=EDGE_LOOP('',(#1562,#1563,#1570,#1573));+#1562=ORIENTED_EDGE('',*,*,#556,.T.);+#1563=ORIENTED_EDGE('',*,*,#1564,.T.);+#1564=EDGE_CURVE('',#551,#1565,#1567,.T.);+#1565=VERTEX_POINT('',#1566);+#1566=CARTESIAN_POINT('',(1.599240387651,0.815,0.668682408883));+#1567=CIRCLE('',#1568,5.E-02);+#1568=AXIS2_PLACEMENT_3D('',#1569,#87,#13);+#1569=CARTESIAN_POINT('',(1.55,0.815,0.66));+#1570=ORIENTED_EDGE('',*,*,#1571,.F.);+#1571=EDGE_CURVE('',#1501,#1565,#1572,.T.);+#1572=LINE('',#1502,#58);+#1573=ORIENTED_EDGE('',*,*,#1500,.F.);+#1574=CYLINDRICAL_SURFACE('',#1504,5.E-02);+#1575=ADVANCED_FACE('',(#1576),#1620,.T.);+#1576=FACE_BOUND('',#1577,.T.);+#1577=EDGE_LOOP('',(#563,#549,#1563,#1578,#1583,#1590,#1595,#1600,#1605,#1611,#1616,#904));+#1578=ORIENTED_EDGE('',*,*,#1579,.T.);+#1579=EDGE_CURVE('',#1565,#1580,#1582,.T.);+#1580=VERTEX_POINT('',#1581);+#1581=CARTESIAN_POINT('',(1.679314818512,0.815,0.190060919137));+#1582=LINE('',#1566,#1511);+#1583=ORIENTED_EDGE('',*,*,#1584,.T.);+#1584=EDGE_CURVE('',#1580,#1585,#1587,.T.);+#1585=VERTEX_POINT('',#1586);+#1586=CARTESIAN_POINT('',(1.905820601705,0.815,-1.110223024625E-16));+#1587=CIRCLE('',#1588,0.23);+#1588=AXIS2_PLACEMENT_3D('',#1589,#59,#1520);+#1589=CARTESIAN_POINT('',(1.905820601705,0.815,0.23));+#1590=ORIENTED_EDGE('',*,*,#1591,.T.);+#1591=EDGE_CURVE('',#1585,#1592,#1594,.T.);+#1592=VERTEX_POINT('',#1593);+#1593=CARTESIAN_POINT('',(2.45,0.815,-1.110223024625E-16));+#1594=LINE('',#1586,#27);+#1595=ORIENTED_EDGE('',*,*,#1596,.T.);+#1596=EDGE_CURVE('',#1592,#1597,#1599,.T.);+#1597=VERTEX_POINT('',#1598);+#1598=CARTESIAN_POINT('',(2.45,0.815,0.18));+#1599=LINE('',#1593,#370);+#1600=ORIENTED_EDGE('',*,*,#1601,.T.);+#1601=EDGE_CURVE('',#1597,#1602,#1604,.T.);+#1602=VERTEX_POINT('',#1603);+#1603=CARTESIAN_POINT('',(1.905820601705,0.815,0.18));+#1604=LINE('',#1598,#72);+#1605=ORIENTED_EDGE('',*,*,#1606,.T.);+#1606=EDGE_CURVE('',#1602,#1607,#1609,.T.);+#1607=VERTEX_POINT('',#1608);+#1608=CARTESIAN_POINT('',(1.856580214054,0.815,0.221317591117));+#1609=CIRCLE('',#1610,5.E-02);+#1610=AXIS2_PLACEMENT_3D('',#1589,#87,#1542);+#1611=ORIENTED_EDGE('',*,*,#1612,.T.);+#1612=EDGE_CURVE('',#1607,#1613,#1615,.T.);+#1613=VERTEX_POINT('',#1614);+#1614=CARTESIAN_POINT('',(1.776505783193,0.815,0.699939080863));+#1615=LINE('',#1608,#1548);+#1616=ORIENTED_EDGE('',*,*,#1617,.T.);+#1617=EDGE_CURVE('',#1613,#901,#1618,.T.);+#1618=CIRCLE('',#1619,0.23);+#1619=AXIS2_PLACEMENT_3D('',#1569,#59,#1554);+#1620=PLANE('',#1621);+#1621=AXIS2_PLACEMENT_3D('',#1622,#59,#13);+#1622=CARTESIAN_POINT('',(1.866683009871,0.815,0.364895428128));+#1623=ADVANCED_FACE('',(#1624),#340,.F.);+#1624=FACE_BOUND('',#1625,.F.);+#1625=EDGE_LOOP('',(#1626,#1627,#1628,#1632));+#1626=ORIENTED_EDGE('',*,*,#908,.F.);+#1627=ORIENTED_EDGE('',*,*,#577,.T.);+#1628=ORIENTED_EDGE('',*,*,#1629,.T.);+#1629=EDGE_CURVE('',#572,#857,#1630,.T.);+#1630=LINE('',#1631,#72);+#1631=CARTESIAN_POINT('',(1.55,0.485,0.89));+#1632=ORIENTED_EDGE('',*,*,#856,.F.);+#1633=ADVANCED_FACE('',(#1634),#1690,.F.);+#1634=FACE_BOUND('',#1635,.F.);+#1635=EDGE_LOOP('',(#1636,#1637,#1638,#1645,#1650,#1657,#1662,#1667,#1672,#1678,#1683,#1688));+#1636=ORIENTED_EDGE('',*,*,#571,.F.);+#1637=ORIENTED_EDGE('',*,*,#582,.T.);+#1638=ORIENTED_EDGE('',*,*,#1639,.T.);+#1639=EDGE_CURVE('',#583,#1640,#1642,.T.);+#1640=VERTEX_POINT('',#1641);+#1641=CARTESIAN_POINT('',(1.599240387651,0.485,0.668682408883));+#1642=CIRCLE('',#1643,5.E-02);+#1643=AXIS2_PLACEMENT_3D('',#1644,#87,#13);+#1644=CARTESIAN_POINT('',(1.55,0.485,0.66));+#1645=ORIENTED_EDGE('',*,*,#1646,.T.);+#1646=EDGE_CURVE('',#1640,#1647,#1649,.T.);+#1647=VERTEX_POINT('',#1648);+#1648=CARTESIAN_POINT('',(1.679314818512,0.485,0.190060919137));+#1649=LINE('',#1641,#1511);+#1650=ORIENTED_EDGE('',*,*,#1651,.T.);+#1651=EDGE_CURVE('',#1647,#1652,#1654,.T.);+#1652=VERTEX_POINT('',#1653);+#1653=CARTESIAN_POINT('',(1.905820601705,0.485,-1.110223024625E-16));+#1654=CIRCLE('',#1655,0.23);+#1655=AXIS2_PLACEMENT_3D('',#1656,#59,#1520);+#1656=CARTESIAN_POINT('',(1.905820601705,0.485,0.23));+#1657=ORIENTED_EDGE('',*,*,#1658,.T.);+#1658=EDGE_CURVE('',#1652,#1659,#1661,.T.);+#1659=VERTEX_POINT('',#1660);+#1660=CARTESIAN_POINT('',(2.45,0.485,-1.110223024625E-16));+#1661=LINE('',#1653,#27);+#1662=ORIENTED_EDGE('',*,*,#1663,.T.);+#1663=EDGE_CURVE('',#1659,#1664,#1666,.T.);+#1664=VERTEX_POINT('',#1665);+#1665=CARTESIAN_POINT('',(2.45,0.485,0.18));+#1666=LINE('',#1660,#370);+#1667=ORIENTED_EDGE('',*,*,#1668,.T.);+#1668=EDGE_CURVE('',#1664,#1669,#1671,.T.);+#1669=VERTEX_POINT('',#1670);+#1670=CARTESIAN_POINT('',(1.905820601705,0.485,0.18));+#1671=LINE('',#1665,#72);+#1672=ORIENTED_EDGE('',*,*,#1673,.T.);+#1673=EDGE_CURVE('',#1669,#1674,#1676,.T.);+#1674=VERTEX_POINT('',#1675);+#1675=CARTESIAN_POINT('',(1.856580214054,0.485,0.221317591117));+#1676=CIRCLE('',#1677,5.E-02);+#1677=AXIS2_PLACEMENT_3D('',#1656,#87,#1542);+#1678=ORIENTED_EDGE('',*,*,#1679,.T.);+#1679=EDGE_CURVE('',#1674,#1680,#1682,.T.);+#1680=VERTEX_POINT('',#1681);+#1681=CARTESIAN_POINT('',(1.776505783193,0.485,0.699939080863));+#1682=LINE('',#1675,#1548);+#1683=ORIENTED_EDGE('',*,*,#1684,.T.);+#1684=EDGE_CURVE('',#1680,#1685,#1686,.T.);+#1685=VERTEX_POINT('',#1631);+#1686=CIRCLE('',#1687,0.23);+#1687=AXIS2_PLACEMENT_3D('',#1644,#59,#1554);+#1688=ORIENTED_EDGE('',*,*,#1689,.T.);+#1689=EDGE_CURVE('',#1685,#572,#1630,.T.);+#1690=PLANE('',#1691);+#1691=AXIS2_PLACEMENT_3D('',#1692,#59,#13);+#1692=CARTESIAN_POINT('',(1.866683009871,0.485,0.364895428128));+#1693=ADVANCED_FACE('',(#1694),#1708,.F.);+#1694=FACE_BOUND('',#1695,.F.);+#1695=EDGE_LOOP('',(#1696,#1697,#1704,#1707));+#1696=ORIENTED_EDGE('',*,*,#595,.T.);+#1697=ORIENTED_EDGE('',*,*,#1698,.T.);+#1698=EDGE_CURVE('',#590,#1699,#1701,.T.);+#1699=VERTEX_POINT('',#1700);+#1700=CARTESIAN_POINT('',(1.599240387651,0.165,0.668682408883));+#1701=CIRCLE('',#1702,5.E-02);+#1702=AXIS2_PLACEMENT_3D('',#1703,#87,#13);+#1703=CARTESIAN_POINT('',(1.55,0.165,0.66));+#1704=ORIENTED_EDGE('',*,*,#1705,.F.);+#1705=EDGE_CURVE('',#1640,#1699,#1706,.T.);+#1706=LINE('',#1641,#58);+#1707=ORIENTED_EDGE('',*,*,#1639,.F.);+#1708=CYLINDRICAL_SURFACE('',#1643,5.E-02);+#1709=ADVANCED_FACE('',(#1710),#1759,.T.);+#1710=FACE_BOUND('',#1711,.T.);+#1711=EDGE_LOOP('',(#602,#588,#1697,#1712,#1717,#1724,#1729,#1734,#1739,#1745,#1750,#1756));+#1712=ORIENTED_EDGE('',*,*,#1713,.T.);+#1713=EDGE_CURVE('',#1699,#1714,#1716,.T.);+#1714=VERTEX_POINT('',#1715);+#1715=CARTESIAN_POINT('',(1.679314818512,0.165,0.190060919137));+#1716=LINE('',#1700,#1511);+#1717=ORIENTED_EDGE('',*,*,#1718,.T.);+#1718=EDGE_CURVE('',#1714,#1719,#1721,.T.);+#1719=VERTEX_POINT('',#1720);+#1720=CARTESIAN_POINT('',(1.905820601705,0.165,-1.110223024625E-16));+#1721=CIRCLE('',#1722,0.23);+#1722=AXIS2_PLACEMENT_3D('',#1723,#59,#1520);+#1723=CARTESIAN_POINT('',(1.905820601705,0.165,0.23));+#1724=ORIENTED_EDGE('',*,*,#1725,.T.);+#1725=EDGE_CURVE('',#1719,#1726,#1728,.T.);+#1726=VERTEX_POINT('',#1727);+#1727=CARTESIAN_POINT('',(2.45,0.165,-1.110223024625E-16));+#1728=LINE('',#1720,#27);+#1729=ORIENTED_EDGE('',*,*,#1730,.T.);+#1730=EDGE_CURVE('',#1726,#1731,#1733,.T.);+#1731=VERTEX_POINT('',#1732);+#1732=CARTESIAN_POINT('',(2.45,0.165,0.18));+#1733=LINE('',#1727,#370);+#1734=ORIENTED_EDGE('',*,*,#1735,.T.);+#1735=EDGE_CURVE('',#1731,#1736,#1738,.T.);+#1736=VERTEX_POINT('',#1737);+#1737=CARTESIAN_POINT('',(1.905820601705,0.165,0.18));+#1738=LINE('',#1732,#72);+#1739=ORIENTED_EDGE('',*,*,#1740,.T.);+#1740=EDGE_CURVE('',#1736,#1741,#1743,.T.);+#1741=VERTEX_POINT('',#1742);+#1742=CARTESIAN_POINT('',(1.856580214054,0.165,0.221317591117));+#1743=CIRCLE('',#1744,5.E-02);+#1744=AXIS2_PLACEMENT_3D('',#1723,#87,#1542);+#1745=ORIENTED_EDGE('',*,*,#1746,.T.);+#1746=EDGE_CURVE('',#1741,#1747,#1749,.T.);+#1747=VERTEX_POINT('',#1748);+#1748=CARTESIAN_POINT('',(1.776505783193,0.165,0.699939080863));+#1749=LINE('',#1742,#1548);+#1750=ORIENTED_EDGE('',*,*,#1751,.T.);+#1751=EDGE_CURVE('',#1747,#1752,#1754,.T.);+#1752=VERTEX_POINT('',#1753);+#1753=CARTESIAN_POINT('',(1.55,0.165,0.89));+#1754=CIRCLE('',#1755,0.23);+#1755=AXIS2_PLACEMENT_3D('',#1703,#59,#1554);+#1756=ORIENTED_EDGE('',*,*,#1757,.T.);+#1757=EDGE_CURVE('',#1752,#604,#1758,.T.);+#1758=LINE('',#1753,#72);+#1759=PLANE('',#1760);+#1760=AXIS2_PLACEMENT_3D('',#1761,#59,#13);+#1761=CARTESIAN_POINT('',(1.866683009871,0.165,0.364895428128));+#1762=ADVANCED_FACE('',(#1763),#340,.F.);+#1763=FACE_BOUND('',#1764,.F.);+#1764=EDGE_LOOP('',(#1765,#1767,#1768,#1772));+#1765=ORIENTED_EDGE('',*,*,#1766,.F.);+#1766=EDGE_CURVE('',#604,#861,#1758,.T.);+#1767=ORIENTED_EDGE('',*,*,#616,.T.);+#1768=ORIENTED_EDGE('',*,*,#1769,.T.);+#1769=EDGE_CURVE('',#611,#865,#1770,.T.);+#1770=LINE('',#1771,#72);+#1771=CARTESIAN_POINT('',(1.55,-0.165,0.89));+#1772=ORIENTED_EDGE('',*,*,#864,.F.);+#1773=ADVANCED_FACE('',(#1774),#1830,.F.);+#1774=FACE_BOUND('',#1775,.F.);+#1775=EDGE_LOOP('',(#1776,#1777,#1778,#1785,#1790,#1797,#1802,#1807,#1812,#1818,#1823,#1828));+#1776=ORIENTED_EDGE('',*,*,#610,.F.);+#1777=ORIENTED_EDGE('',*,*,#621,.T.);+#1778=ORIENTED_EDGE('',*,*,#1779,.T.);+#1779=EDGE_CURVE('',#622,#1780,#1782,.T.);+#1780=VERTEX_POINT('',#1781);+#1781=CARTESIAN_POINT('',(1.599240387651,-0.165,0.668682408883));+#1782=CIRCLE('',#1783,5.E-02);+#1783=AXIS2_PLACEMENT_3D('',#1784,#87,#13);+#1784=CARTESIAN_POINT('',(1.55,-0.165,0.66));+#1785=ORIENTED_EDGE('',*,*,#1786,.T.);+#1786=EDGE_CURVE('',#1780,#1787,#1789,.T.);+#1787=VERTEX_POINT('',#1788);+#1788=CARTESIAN_POINT('',(1.679314818512,-0.165,0.190060919137));+#1789=LINE('',#1781,#1511);+#1790=ORIENTED_EDGE('',*,*,#1791,.T.);+#1791=EDGE_CURVE('',#1787,#1792,#1794,.T.);+#1792=VERTEX_POINT('',#1793);+#1793=CARTESIAN_POINT('',(1.905820601705,-0.165,-1.110223024625E-16));+#1794=CIRCLE('',#1795,0.23);+#1795=AXIS2_PLACEMENT_3D('',#1796,#59,#1520);+#1796=CARTESIAN_POINT('',(1.905820601705,-0.165,0.23));+#1797=ORIENTED_EDGE('',*,*,#1798,.T.);+#1798=EDGE_CURVE('',#1792,#1799,#1801,.T.);+#1799=VERTEX_POINT('',#1800);+#1800=CARTESIAN_POINT('',(2.45,-0.165,-1.110223024625E-16));+#1801=LINE('',#1793,#27);+#1802=ORIENTED_EDGE('',*,*,#1803,.T.);+#1803=EDGE_CURVE('',#1799,#1804,#1806,.T.);+#1804=VERTEX_POINT('',#1805);+#1805=CARTESIAN_POINT('',(2.45,-0.165,0.18));+#1806=LINE('',#1800,#370);+#1807=ORIENTED_EDGE('',*,*,#1808,.T.);+#1808=EDGE_CURVE('',#1804,#1809,#1811,.T.);+#1809=VERTEX_POINT('',#1810);+#1810=CARTESIAN_POINT('',(1.905820601705,-0.165,0.18));+#1811=LINE('',#1805,#72);+#1812=ORIENTED_EDGE('',*,*,#1813,.T.);+#1813=EDGE_CURVE('',#1809,#1814,#1816,.T.);+#1814=VERTEX_POINT('',#1815);+#1815=CARTESIAN_POINT('',(1.856580214054,-0.165,0.221317591117));+#1816=CIRCLE('',#1817,5.E-02);+#1817=AXIS2_PLACEMENT_3D('',#1796,#87,#1542);+#1818=ORIENTED_EDGE('',*,*,#1819,.T.);+#1819=EDGE_CURVE('',#1814,#1820,#1822,.T.);+#1820=VERTEX_POINT('',#1821);+#1821=CARTESIAN_POINT('',(1.776505783193,-0.165,0.699939080863));+#1822=LINE('',#1815,#1548);+#1823=ORIENTED_EDGE('',*,*,#1824,.T.);+#1824=EDGE_CURVE('',#1820,#1825,#1826,.T.);+#1825=VERTEX_POINT('',#1771);+#1826=CIRCLE('',#1827,0.23);+#1827=AXIS2_PLACEMENT_3D('',#1784,#59,#1554);+#1828=ORIENTED_EDGE('',*,*,#1829,.T.);+#1829=EDGE_CURVE('',#1825,#611,#1770,.T.);+#1830=PLANE('',#1831);+#1831=AXIS2_PLACEMENT_3D('',#1832,#59,#13);+#1832=CARTESIAN_POINT('',(1.866683009871,-0.165,0.364895428128));+#1833=ADVANCED_FACE('',(#1834),#1848,.F.);+#1834=FACE_BOUND('',#1835,.F.);+#1835=EDGE_LOOP('',(#1836,#1837,#1844,#1847));+#1836=ORIENTED_EDGE('',*,*,#634,.T.);+#1837=ORIENTED_EDGE('',*,*,#1838,.T.);+#1838=EDGE_CURVE('',#629,#1839,#1841,.T.);+#1839=VERTEX_POINT('',#1840);+#1840=CARTESIAN_POINT('',(1.599240387651,-0.485,0.668682408883));+#1841=CIRCLE('',#1842,5.E-02);+#1842=AXIS2_PLACEMENT_3D('',#1843,#87,#13);+#1843=CARTESIAN_POINT('',(1.55,-0.485,0.66));+#1844=ORIENTED_EDGE('',*,*,#1845,.F.);+#1845=EDGE_CURVE('',#1780,#1839,#1846,.T.);+#1846=LINE('',#1781,#58);+#1847=ORIENTED_EDGE('',*,*,#1779,.F.);+#1848=CYLINDRICAL_SURFACE('',#1783,5.E-02);+#1849=ADVANCED_FACE('',(#1850),#1899,.T.);+#1850=FACE_BOUND('',#1851,.T.);+#1851=EDGE_LOOP('',(#641,#627,#1837,#1852,#1857,#1864,#1869,#1874,#1879,#1885,#1890,#1896));+#1852=ORIENTED_EDGE('',*,*,#1853,.T.);+#1853=EDGE_CURVE('',#1839,#1854,#1856,.T.);+#1854=VERTEX_POINT('',#1855);+#1855=CARTESIAN_POINT('',(1.679314818512,-0.485,0.190060919137));+#1856=LINE('',#1840,#1511);+#1857=ORIENTED_EDGE('',*,*,#1858,.T.);+#1858=EDGE_CURVE('',#1854,#1859,#1861,.T.);+#1859=VERTEX_POINT('',#1860);+#1860=CARTESIAN_POINT('',(1.905820601705,-0.485,-1.110223024625E-16));+#1861=CIRCLE('',#1862,0.23);+#1862=AXIS2_PLACEMENT_3D('',#1863,#59,#1520);+#1863=CARTESIAN_POINT('',(1.905820601705,-0.485,0.23));+#1864=ORIENTED_EDGE('',*,*,#1865,.T.);+#1865=EDGE_CURVE('',#1859,#1866,#1868,.T.);+#1866=VERTEX_POINT('',#1867);+#1867=CARTESIAN_POINT('',(2.45,-0.485,-1.110223024625E-16));+#1868=LINE('',#1860,#27);+#1869=ORIENTED_EDGE('',*,*,#1870,.T.);+#1870=EDGE_CURVE('',#1866,#1871,#1873,.T.);+#1871=VERTEX_POINT('',#1872);+#1872=CARTESIAN_POINT('',(2.45,-0.485,0.18));+#1873=LINE('',#1867,#370);+#1874=ORIENTED_EDGE('',*,*,#1875,.T.);+#1875=EDGE_CURVE('',#1871,#1876,#1878,.T.);+#1876=VERTEX_POINT('',#1877);+#1877=CARTESIAN_POINT('',(1.905820601705,-0.485,0.18));+#1878=LINE('',#1872,#72);+#1879=ORIENTED_EDGE('',*,*,#1880,.T.);+#1880=EDGE_CURVE('',#1876,#1881,#1883,.T.);+#1881=VERTEX_POINT('',#1882);+#1882=CARTESIAN_POINT('',(1.856580214054,-0.485,0.221317591117));+#1883=CIRCLE('',#1884,5.E-02);+#1884=AXIS2_PLACEMENT_3D('',#1863,#87,#1542);+#1885=ORIENTED_EDGE('',*,*,#1886,.T.);+#1886=EDGE_CURVE('',#1881,#1887,#1889,.T.);+#1887=VERTEX_POINT('',#1888);+#1888=CARTESIAN_POINT('',(1.776505783193,-0.485,0.699939080863));+#1889=LINE('',#1882,#1548);+#1890=ORIENTED_EDGE('',*,*,#1891,.T.);+#1891=EDGE_CURVE('',#1887,#1892,#1894,.T.);+#1892=VERTEX_POINT('',#1893);+#1893=CARTESIAN_POINT('',(1.55,-0.485,0.89));+#1894=CIRCLE('',#1895,0.23);+#1895=AXIS2_PLACEMENT_3D('',#1843,#59,#1554);+#1896=ORIENTED_EDGE('',*,*,#1897,.T.);+#1897=EDGE_CURVE('',#1892,#643,#1898,.T.);+#1898=LINE('',#1893,#72);+#1899=PLANE('',#1900);+#1900=AXIS2_PLACEMENT_3D('',#1901,#59,#13);+#1901=CARTESIAN_POINT('',(1.866683009871,-0.485,0.364895428128));+#1902=ADVANCED_FACE('',(#1903),#340,.F.);+#1903=FACE_BOUND('',#1904,.F.);+#1904=EDGE_LOOP('',(#1905,#1907,#1908,#1912));+#1905=ORIENTED_EDGE('',*,*,#1906,.F.);+#1906=EDGE_CURVE('',#643,#869,#1898,.T.);+#1907=ORIENTED_EDGE('',*,*,#655,.T.);+#1908=ORIENTED_EDGE('',*,*,#1909,.T.);+#1909=EDGE_CURVE('',#650,#873,#1910,.T.);+#1910=LINE('',#1911,#72);+#1911=CARTESIAN_POINT('',(1.55,-0.815,0.89));+#1912=ORIENTED_EDGE('',*,*,#872,.F.);+#1913=ADVANCED_FACE('',(#1914),#1970,.F.);+#1914=FACE_BOUND('',#1915,.F.);+#1915=EDGE_LOOP('',(#1916,#1917,#1918,#1925,#1930,#1937,#1942,#1947,#1952,#1958,#1963,#1968));+#1916=ORIENTED_EDGE('',*,*,#649,.F.);+#1917=ORIENTED_EDGE('',*,*,#660,.T.);+#1918=ORIENTED_EDGE('',*,*,#1919,.T.);+#1919=EDGE_CURVE('',#661,#1920,#1922,.T.);+#1920=VERTEX_POINT('',#1921);+#1921=CARTESIAN_POINT('',(1.599240387651,-0.815,0.668682408883));+#1922=CIRCLE('',#1923,5.E-02);+#1923=AXIS2_PLACEMENT_3D('',#1924,#87,#13);+#1924=CARTESIAN_POINT('',(1.55,-0.815,0.66));+#1925=ORIENTED_EDGE('',*,*,#1926,.T.);+#1926=EDGE_CURVE('',#1920,#1927,#1929,.T.);+#1927=VERTEX_POINT('',#1928);+#1928=CARTESIAN_POINT('',(1.679314818512,-0.815,0.190060919137));+#1929=LINE('',#1921,#1511);+#1930=ORIENTED_EDGE('',*,*,#1931,.T.);+#1931=EDGE_CURVE('',#1927,#1932,#1934,.T.);+#1932=VERTEX_POINT('',#1933);+#1933=CARTESIAN_POINT('',(1.905820601705,-0.815,-1.110223024625E-16));+#1934=CIRCLE('',#1935,0.23);+#1935=AXIS2_PLACEMENT_3D('',#1936,#59,#1520);+#1936=CARTESIAN_POINT('',(1.905820601705,-0.815,0.23));+#1937=ORIENTED_EDGE('',*,*,#1938,.T.);+#1938=EDGE_CURVE('',#1932,#1939,#1941,.T.);+#1939=VERTEX_POINT('',#1940);+#1940=CARTESIAN_POINT('',(2.45,-0.815,-1.110223024625E-16));+#1941=LINE('',#1933,#27);+#1942=ORIENTED_EDGE('',*,*,#1943,.T.);+#1943=EDGE_CURVE('',#1939,#1944,#1946,.T.);+#1944=VERTEX_POINT('',#1945);+#1945=CARTESIAN_POINT('',(2.45,-0.815,0.18));+#1946=LINE('',#1940,#370);+#1947=ORIENTED_EDGE('',*,*,#1948,.T.);+#1948=EDGE_CURVE('',#1944,#1949,#1951,.T.);+#1949=VERTEX_POINT('',#1950);+#1950=CARTESIAN_POINT('',(1.905820601705,-0.815,0.18));+#1951=LINE('',#1945,#72);+#1952=ORIENTED_EDGE('',*,*,#1953,.T.);+#1953=EDGE_CURVE('',#1949,#1954,#1956,.T.);+#1954=VERTEX_POINT('',#1955);+#1955=CARTESIAN_POINT('',(1.856580214054,-0.815,0.221317591117));+#1956=CIRCLE('',#1957,5.E-02);+#1957=AXIS2_PLACEMENT_3D('',#1936,#87,#1542);+#1958=ORIENTED_EDGE('',*,*,#1959,.T.);+#1959=EDGE_CURVE('',#1954,#1960,#1962,.T.);+#1960=VERTEX_POINT('',#1961);+#1961=CARTESIAN_POINT('',(1.776505783193,-0.815,0.699939080863));+#1962=LINE('',#1955,#1548);+#1963=ORIENTED_EDGE('',*,*,#1964,.T.);+#1964=EDGE_CURVE('',#1960,#1965,#1966,.T.);+#1965=VERTEX_POINT('',#1911);+#1966=CIRCLE('',#1967,0.23);+#1967=AXIS2_PLACEMENT_3D('',#1924,#59,#1554);+#1968=ORIENTED_EDGE('',*,*,#1969,.T.);+#1969=EDGE_CURVE('',#1965,#650,#1910,.T.);+#1970=PLANE('',#1971);+#1971=AXIS2_PLACEMENT_3D('',#1972,#59,#13);+#1972=CARTESIAN_POINT('',(1.866683009871,-0.815,0.364895428128));+#1973=ADVANCED_FACE('',(#1974),#1988,.F.);+#1974=FACE_BOUND('',#1975,.F.);+#1975=EDGE_LOOP('',(#1976,#1977,#1984,#1987));+#1976=ORIENTED_EDGE('',*,*,#673,.T.);+#1977=ORIENTED_EDGE('',*,*,#1978,.T.);+#1978=EDGE_CURVE('',#668,#1979,#1981,.T.);+#1979=VERTEX_POINT('',#1980);+#1980=CARTESIAN_POINT('',(1.599240387651,-1.135,0.668682408883));+#1981=CIRCLE('',#1982,5.E-02);+#1982=AXIS2_PLACEMENT_3D('',#1983,#87,#13);+#1983=CARTESIAN_POINT('',(1.55,-1.135,0.66));+#1984=ORIENTED_EDGE('',*,*,#1985,.F.);+#1985=EDGE_CURVE('',#1920,#1979,#1986,.T.);+#1986=LINE('',#1921,#58);+#1987=ORIENTED_EDGE('',*,*,#1919,.F.);+#1988=CYLINDRICAL_SURFACE('',#1923,5.E-02);+#1989=ADVANCED_FACE('',(#1990),#2037,.T.);+#1990=FACE_BOUND('',#1991,.T.);+#1991=EDGE_LOOP('',(#680,#666,#1977,#1992,#1997,#2004,#2009,#2014,#2019,#2025,#2030,#2035));+#1992=ORIENTED_EDGE('',*,*,#1993,.T.);+#1993=EDGE_CURVE('',#1979,#1994,#1996,.T.);+#1994=VERTEX_POINT('',#1995);+#1995=CARTESIAN_POINT('',(1.679314818512,-1.135,0.190060919137));+#1996=LINE('',#1980,#1511);+#1997=ORIENTED_EDGE('',*,*,#1998,.T.);+#1998=EDGE_CURVE('',#1994,#1999,#2001,.T.);+#1999=VERTEX_POINT('',#2000);+#2000=CARTESIAN_POINT('',(1.905820601705,-1.135,-1.110223024625E-16));+#2001=CIRCLE('',#2002,0.23);+#2002=AXIS2_PLACEMENT_3D('',#2003,#59,#1520);+#2003=CARTESIAN_POINT('',(1.905820601705,-1.135,0.23));+#2004=ORIENTED_EDGE('',*,*,#2005,.T.);+#2005=EDGE_CURVE('',#1999,#2006,#2008,.T.);+#2006=VERTEX_POINT('',#2007);+#2007=CARTESIAN_POINT('',(2.45,-1.135,-1.110223024625E-16));+#2008=LINE('',#2000,#27);+#2009=ORIENTED_EDGE('',*,*,#2010,.T.);+#2010=EDGE_CURVE('',#2006,#2011,#2013,.T.);+#2011=VERTEX_POINT('',#2012);+#2012=CARTESIAN_POINT('',(2.45,-1.135,0.18));+#2013=LINE('',#2007,#370);+#2014=ORIENTED_EDGE('',*,*,#2015,.T.);+#2015=EDGE_CURVE('',#2011,#2016,#2018,.T.);+#2016=VERTEX_POINT('',#2017);+#2017=CARTESIAN_POINT('',(1.905820601705,-1.135,0.18));+#2018=LINE('',#2012,#72);+#2019=ORIENTED_EDGE('',*,*,#2020,.T.);+#2020=EDGE_CURVE('',#2016,#2021,#2023,.T.);+#2021=VERTEX_POINT('',#2022);+#2022=CARTESIAN_POINT('',(1.856580214054,-1.135,0.221317591117));+#2023=CIRCLE('',#2024,5.E-02);+#2024=AXIS2_PLACEMENT_3D('',#2003,#87,#1542);+#2025=ORIENTED_EDGE('',*,*,#2026,.T.);+#2026=EDGE_CURVE('',#2021,#2027,#2029,.T.);+#2027=VERTEX_POINT('',#2028);+#2028=CARTESIAN_POINT('',(1.776505783193,-1.135,0.699939080863));+#2029=LINE('',#2022,#1548);+#2030=ORIENTED_EDGE('',*,*,#2031,.T.);+#2031=EDGE_CURVE('',#2027,#2032,#2033,.T.);+#2032=VERTEX_POINT('',#939);+#2033=CIRCLE('',#2034,0.23);+#2034=AXIS2_PLACEMENT_3D('',#1983,#59,#1554);+#2035=ORIENTED_EDGE('',*,*,#2036,.T.);+#2036=EDGE_CURVE('',#2032,#682,#938,.T.);+#2037=PLANE('',#2038);+#2038=AXIS2_PLACEMENT_3D('',#2039,#59,#13);+#2039=CARTESIAN_POINT('',(1.866683009871,-1.135,0.364895428128));+#2040=ADVANCED_FACE('',(#2041),#2048,.T.);+#2041=FACE_BOUND('',#2042,.F.);+#2042=EDGE_LOOP('',(#2043,#1487,#2046,#2047));+#2043=ORIENTED_EDGE('',*,*,#2044,.T.);+#2044=EDGE_CURVE('',#1419,#1484,#2045,.T.);+#2045=LINE('',#1420,#396);+#2046=ORIENTED_EDGE('',*,*,#744,.F.);+#2047=ORIENTED_EDGE('',*,*,#1423,.F.);+#2048=CYLINDRICAL_SURFACE('',#2049,0.23);+#2049=AXIS2_PLACEMENT_3D('',#1383,#956,#1009);+#2050=ADVANCED_FACE('',(#2051),#2060,.F.);+#2051=FACE_BOUND('',#2052,.F.);+#2052=EDGE_LOOP('',(#2053,#2054,#1078,#2057,#2058,#2059));+#2053=ORIENTED_EDGE('',*,*,#1011,.F.);+#2054=ORIENTED_EDGE('',*,*,#2055,.T.);+#2055=EDGE_CURVE('',#1005,#1074,#2056,.T.);+#2056=LINE('',#920,#396);+#2057=ORIENTED_EDGE('',*,*,#1094,.T.);+#2058=ORIENTED_EDGE('',*,*,#768,.F.);+#2059=ORIENTED_EDGE('',*,*,#918,.F.);+#2060=PLANE('',#2061);+#2061=AXIS2_PLACEMENT_3D('',#920,#758,#335);+#2062=ADVANCED_FACE('',(#2063),#2072,.F.);+#2063=FACE_BOUND('',#2064,.F.);+#2064=EDGE_LOOP('',(#2065,#2066,#1218,#2069,#2070,#2071));+#2065=ORIENTED_EDGE('',*,*,#1151,.F.);+#2066=ORIENTED_EDGE('',*,*,#2067,.T.);+#2067=EDGE_CURVE('',#1147,#1214,#2068,.T.);+#2068=LINE('',#1091,#396);+#2069=ORIENTED_EDGE('',*,*,#1234,.T.);+#2070=ORIENTED_EDGE('',*,*,#776,.F.);+#2071=ORIENTED_EDGE('',*,*,#1089,.F.);+#2072=PLANE('',#2073);+#2073=AXIS2_PLACEMENT_3D('',#1091,#758,#335);+#2074=ADVANCED_FACE('',(#2075),#2084,.F.);+#2075=FACE_BOUND('',#2076,.F.);+#2076=EDGE_LOOP('',(#2077,#2078,#1358,#2081,#2082,#2083));+#2077=ORIENTED_EDGE('',*,*,#1291,.F.);+#2078=ORIENTED_EDGE('',*,*,#2079,.T.);+#2079=EDGE_CURVE('',#1287,#1354,#2080,.T.);+#2080=LINE('',#1231,#396);+#2081=ORIENTED_EDGE('',*,*,#1371,.T.);+#2082=ORIENTED_EDGE('',*,*,#784,.F.);+#2083=ORIENTED_EDGE('',*,*,#1229,.F.);+#2084=PLANE('',#2085);+#2085=AXIS2_PLACEMENT_3D('',#1231,#758,#335);+#2086=ADVANCED_FACE('',(#2087,#2107),#2117,.F.);+#2087=FACE_BOUND('',#2088,.F.);+#2088=EDGE_LOOP('',(#2089,#2090,#2091,#2092,#2097,#2102,#2105,#2106));+#2089=ORIENTED_EDGE('',*,*,#829,.T.);+#2090=ORIENTED_EDGE('',*,*,#843,.T.);+#2091=ORIENTED_EDGE('',*,*,#889,.T.);+#2092=ORIENTED_EDGE('',*,*,#2093,.T.);+#2093=EDGE_CURVE('',#885,#2094,#2096,.T.);+#2094=VERTEX_POINT('',#2095);+#2095=CARTESIAN_POINT('',(1.226111990816,-1.352223981632,1.35));+#2096=LINE('',#886,#65);+#2097=ORIENTED_EDGE('',*,*,#2098,.T.);+#2098=EDGE_CURVE('',#2094,#2099,#2101,.T.);+#2099=VERTEX_POINT('',#2100);+#2100=CARTESIAN_POINT('',(-1.226111990816,-1.352223981632,1.35));+#2101=LINE('',#2095,#72);+#2102=ORIENTED_EDGE('',*,*,#2103,.T.);+#2103=EDGE_CURVE('',#2099,#798,#2104,.T.);+#2104=LINE('',#2100,#79);+#2105=ORIENTED_EDGE('',*,*,#797,.T.);+#2106=ORIENTED_EDGE('',*,*,#815,.T.);+#2107=FACE_BOUND('',#2108,.F.);+#2108=EDGE_LOOP('',(#2109));+#2109=ORIENTED_EDGE('',*,*,#2110,.F.);+#2110=EDGE_CURVE('',#2111,#2111,#2113,.T.);+#2111=VERTEX_POINT('',#2112);+#2112=CARTESIAN_POINT('',(-1.052223981632,0.927223981632,1.35));+#2113=CIRCLE('',#2114,0.125);+#2114=AXIS2_PLACEMENT_3D('',#2115,#2116,#59);+#2115=CARTESIAN_POINT('',(-1.052223981632,1.052223981632,1.35));+#2116=DIRECTION('',(0.,-0.,-1.));+#2117=PLANE('',#2118);+#2118=AXIS2_PLACEMENT_3D('',#812,#758,#2119);+#2119=DIRECTION('',(0.671717630107,-0.74080727953,0.));+#2120=ADVANCED_FACE('',(#2121),#2129,.F.);+#2121=FACE_BOUND('',#2122,.F.);+#2122=EDGE_LOOP('',(#2123,#2124,#2125,#2126));+#2123=ORIENTED_EDGE('',*,*,#923,.T.);+#2124=ORIENTED_EDGE('',*,*,#802,.T.);+#2125=ORIENTED_EDGE('',*,*,#2103,.F.);+#2126=ORIENTED_EDGE('',*,*,#2127,.F.);+#2127=EDGE_CURVE('',#924,#2099,#2128,.T.);+#2128=B_SPLINE_CURVE_WITH_KNOTS('',1,(#925,#2100),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2129=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#925,#2100),(#327,#799)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2130=ADVANCED_FACE('',(#2131),#2140,.F.);+#2131=FACE_BOUND('',#2132,.F.);+#2132=EDGE_LOOP('',(#2133,#2134,#1756,#2137,#2138,#2139));+#2133=ORIENTED_EDGE('',*,*,#1689,.F.);+#2134=ORIENTED_EDGE('',*,*,#2135,.T.);+#2135=EDGE_CURVE('',#1685,#1752,#2136,.T.);+#2136=LINE('',#1631,#58);+#2137=ORIENTED_EDGE('',*,*,#1766,.T.);+#2138=ORIENTED_EDGE('',*,*,#860,.F.);+#2139=ORIENTED_EDGE('',*,*,#1629,.F.);+#2140=PLANE('',#2141);+#2141=AXIS2_PLACEMENT_3D('',#1631,#758,#73);+#2142=ADVANCED_FACE('',(#2143),#2152,.F.);+#2143=FACE_BOUND('',#2144,.F.);+#2144=EDGE_LOOP('',(#2145,#2146,#1896,#2149,#2150,#2151));+#2145=ORIENTED_EDGE('',*,*,#1829,.F.);+#2146=ORIENTED_EDGE('',*,*,#2147,.T.);+#2147=EDGE_CURVE('',#1825,#1892,#2148,.T.);+#2148=LINE('',#1771,#58);+#2149=ORIENTED_EDGE('',*,*,#1906,.T.);+#2150=ORIENTED_EDGE('',*,*,#868,.F.);+#2151=ORIENTED_EDGE('',*,*,#1769,.F.);+#2152=PLANE('',#2153);+#2153=AXIS2_PLACEMENT_3D('',#1771,#758,#73);+#2154=ADVANCED_FACE('',(#2155),#2164,.F.);+#2155=FACE_BOUND('',#2156,.F.);+#2156=EDGE_LOOP('',(#2157,#2158,#2035,#2161,#2162,#2163));+#2157=ORIENTED_EDGE('',*,*,#1969,.F.);+#2158=ORIENTED_EDGE('',*,*,#2159,.T.);+#2159=EDGE_CURVE('',#1965,#2032,#2160,.T.);+#2160=LINE('',#1911,#58);+#2161=ORIENTED_EDGE('',*,*,#937,.T.);+#2162=ORIENTED_EDGE('',*,*,#876,.F.);+#2163=ORIENTED_EDGE('',*,*,#1909,.F.);+#2164=PLANE('',#2165);+#2165=AXIS2_PLACEMENT_3D('',#1911,#758,#73);+#2166=ADVANCED_FACE('',(#2167),#2175,.F.);+#2167=FACE_BOUND('',#2168,.F.);+#2168=EDGE_LOOP('',(#2169,#2170,#2173,#2174));+#2169=ORIENTED_EDGE('',*,*,#933,.T.);+#2170=ORIENTED_EDGE('',*,*,#2171,.T.);+#2171=EDGE_CURVE('',#929,#2094,#2172,.T.);+#2172=B_SPLINE_CURVE_WITH_KNOTS('',1,(#930,#2095),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2173=ORIENTED_EDGE('',*,*,#2093,.F.);+#2174=ORIENTED_EDGE('',*,*,#884,.F.);+#2175=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#882,#886),(#930,#2095)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2176=ADVANCED_FACE('',(#2177),#2184,.T.);+#2177=FACE_BOUND('',#2178,.F.);+#2178=EDGE_LOOP('',(#2179,#1616,#2182,#2183));+#2179=ORIENTED_EDGE('',*,*,#2180,.T.);+#2180=EDGE_CURVE('',#1545,#1613,#2181,.T.);+#2181=LINE('',#1546,#58);+#2182=ORIENTED_EDGE('',*,*,#900,.F.);+#2183=ORIENTED_EDGE('',*,*,#1551,.F.);+#2184=CYLINDRICAL_SURFACE('',#2185,0.23);+#2185=AXIS2_PLACEMENT_3D('',#1505,#87,#1554);+#2186=ADVANCED_FACE('',(#2187),#2193,.F.);+#2187=FACE_BOUND('',#2188,.F.);+#2188=EDGE_LOOP('',(#2189,#2190,#2191,#2192));+#2189=ORIENTED_EDGE('',*,*,#928,.T.);+#2190=ORIENTED_EDGE('',*,*,#2127,.T.);+#2191=ORIENTED_EDGE('',*,*,#2098,.F.);+#2192=ORIENTED_EDGE('',*,*,#2171,.F.);+#2193=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#930,#2095),(#925,#2100)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.55),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2194=ADVANCED_FACE('',(#2195),#2202,.T.);+#2195=FACE_BOUND('',#2196,.F.);+#2196=EDGE_LOOP('',(#2197,#1072,#2200,#2201));+#2197=ORIENTED_EDGE('',*,*,#2198,.T.);+#2198=EDGE_CURVE('',#998,#1069,#2199,.T.);+#2199=LINE('',#999,#396);+#2200=ORIENTED_EDGE('',*,*,#2055,.F.);+#2201=ORIENTED_EDGE('',*,*,#1004,.F.);+#2202=CYLINDRICAL_SURFACE('',#2203,0.23);+#2203=AXIS2_PLACEMENT_3D('',#955,#956,#1009);+#2204=ADVANCED_FACE('',(#2205),#2212,.F.);+#2205=FACE_BOUND('',#2206,.F.);+#2206=EDGE_LOOP('',(#2207,#1067,#2210,#2211));+#2207=ORIENTED_EDGE('',*,*,#2208,.T.);+#2208=EDGE_CURVE('',#990,#1063,#2209,.T.);+#2209=LINE('',#991,#396);+#2210=ORIENTED_EDGE('',*,*,#2198,.F.);+#2211=ORIENTED_EDGE('',*,*,#997,.F.);+#2212=PLANE('',#2213);+#2213=AXIS2_PLACEMENT_3D('',#991,#2214,#1002);+#2214=DIRECTION('',(0.986292087668,-1.128552634524E-17,-0.16500884159));+#2215=ADVANCED_FACE('',(#2216),#2223,.F.);+#2216=FACE_BOUND('',#2217,.F.);+#2217=EDGE_LOOP('',(#2218,#1061,#2221,#2222));+#2218=ORIENTED_EDGE('',*,*,#2219,.T.);+#2219=EDGE_CURVE('',#985,#1058,#2220,.T.);+#2220=LINE('',#986,#396);+#2221=ORIENTED_EDGE('',*,*,#2208,.F.);+#2222=ORIENTED_EDGE('',*,*,#989,.F.);+#2223=CYLINDRICAL_SURFACE('',#2224,5.E-02);+#2224=AXIS2_PLACEMENT_3D('',#970,#956,#995);+#2225=ADVANCED_FACE('',(#2226),#2233,.F.);+#2226=FACE_BOUND('',#2227,.F.);+#2227=EDGE_LOOP('',(#2228,#1056,#2231,#2232));+#2228=ORIENTED_EDGE('',*,*,#2229,.T.);+#2229=EDGE_CURVE('',#980,#1053,#2230,.T.);+#2230=LINE('',#981,#396);+#2231=ORIENTED_EDGE('',*,*,#2219,.F.);+#2232=ORIENTED_EDGE('',*,*,#984,.F.);+#2233=PLANE('',#2234);+#2234=AXIS2_PLACEMENT_3D('',#981,#758,#335);+#2235=ADVANCED_FACE('',(#2236),#2243,.F.);+#2236=FACE_BOUND('',#2237,.F.);+#2237=EDGE_LOOP('',(#2238,#1051,#2241,#2242));+#2238=ORIENTED_EDGE('',*,*,#2239,.T.);+#2239=EDGE_CURVE('',#975,#1048,#2240,.T.);+#2240=LINE('',#976,#396);+#2241=ORIENTED_EDGE('',*,*,#2229,.F.);+#2242=ORIENTED_EDGE('',*,*,#979,.F.);+#2243=PLANE('',#2244);+#2244=AXIS2_PLACEMENT_3D('',#976,#335,#13);+#2245=ADVANCED_FACE('',(#2246),#2253,.F.);+#2246=FACE_BOUND('',#2247,.F.);+#2247=EDGE_LOOP('',(#2248,#1046,#2251,#2252));+#2248=ORIENTED_EDGE('',*,*,#2249,.T.);+#2249=EDGE_CURVE('',#966,#1041,#2250,.T.);+#2250=LINE('',#967,#396);+#2251=ORIENTED_EDGE('',*,*,#2239,.F.);+#2252=ORIENTED_EDGE('',*,*,#974,.F.);+#2253=PLANE('',#2254);+#2254=AXIS2_PLACEMENT_3D('',#967,#13,#385);+#2255=ADVANCED_FACE('',(#2256),#2263,.T.);+#2256=FACE_BOUND('',#2257,.F.);+#2257=EDGE_LOOP('',(#2258,#1039,#2261,#2262));+#2258=ORIENTED_EDGE('',*,*,#2259,.T.);+#2259=EDGE_CURVE('',#959,#1036,#2260,.T.);+#2260=LINE('',#960,#396);+#2261=ORIENTED_EDGE('',*,*,#2249,.F.);+#2262=ORIENTED_EDGE('',*,*,#965,.F.);+#2263=CYLINDRICAL_SURFACE('',#2264,0.23);+#2264=AXIS2_PLACEMENT_3D('',#970,#956,#972);+#2265=ADVANCED_FACE('',(#2266),#2271,.F.);+#2266=FACE_BOUND('',#2267,.F.);+#2267=EDGE_LOOP('',(#2268,#1034,#2269,#2270));+#2268=ORIENTED_EDGE('',*,*,#1027,.T.);+#2269=ORIENTED_EDGE('',*,*,#2259,.F.);+#2270=ORIENTED_EDGE('',*,*,#958,.F.);+#2271=PLANE('',#2272);+#2272=AXIS2_PLACEMENT_3D('',#952,#2273,#963);+#2273=DIRECTION('',(-0.986292087668,1.128552634524E-17,0.16500884159));+#2274=ADVANCED_FACE('',(#2275),#2282,.T.);+#2275=FACE_BOUND('',#2276,.F.);+#2276=EDGE_LOOP('',(#2277,#1212,#2280,#2281));+#2277=ORIENTED_EDGE('',*,*,#2278,.T.);+#2278=EDGE_CURVE('',#1142,#1209,#2279,.T.);+#2279=LINE('',#1143,#396);+#2280=ORIENTED_EDGE('',*,*,#2067,.F.);+#2281=ORIENTED_EDGE('',*,*,#1146,.F.);+#2282=CYLINDRICAL_SURFACE('',#2283,0.23);+#2283=AXIS2_PLACEMENT_3D('',#1106,#956,#1009);+#2284=ADVANCED_FACE('',(#2285),#2292,.F.);+#2285=FACE_BOUND('',#2286,.F.);+#2286=EDGE_LOOP('',(#2287,#1207,#2290,#2291));+#2287=ORIENTED_EDGE('',*,*,#2288,.T.);+#2288=EDGE_CURVE('',#1136,#1203,#2289,.T.);+#2289=LINE('',#1137,#396);+#2290=ORIENTED_EDGE('',*,*,#2278,.F.);+#2291=ORIENTED_EDGE('',*,*,#1141,.F.);+#2292=PLANE('',#2293);+#2293=AXIS2_PLACEMENT_3D('',#1137,#2214,#1002);+#2294=ADVANCED_FACE('',(#2295),#2302,.F.);+#2295=FACE_BOUND('',#2296,.F.);+#2296=EDGE_LOOP('',(#2297,#1201,#2300,#2301));+#2297=ORIENTED_EDGE('',*,*,#2298,.T.);+#2298=EDGE_CURVE('',#1131,#1198,#2299,.T.);+#2299=LINE('',#1132,#396);+#2300=ORIENTED_EDGE('',*,*,#2288,.F.);+#2301=ORIENTED_EDGE('',*,*,#1135,.F.);+#2302=CYLINDRICAL_SURFACE('',#2303,5.E-02);+#2303=AXIS2_PLACEMENT_3D('',#1118,#956,#995);+#2304=ADVANCED_FACE('',(#2305),#2312,.F.);+#2305=FACE_BOUND('',#2306,.F.);+#2306=EDGE_LOOP('',(#2307,#1196,#2310,#2311));+#2307=ORIENTED_EDGE('',*,*,#2308,.T.);+#2308=EDGE_CURVE('',#1126,#1193,#2309,.T.);+#2309=LINE('',#1127,#396);+#2310=ORIENTED_EDGE('',*,*,#2298,.F.);+#2311=ORIENTED_EDGE('',*,*,#1130,.F.);+#2312=PLANE('',#2313);+#2313=AXIS2_PLACEMENT_3D('',#1127,#758,#335);+#2314=ADVANCED_FACE('',(#2315),#2322,.F.);+#2315=FACE_BOUND('',#2316,.F.);+#2316=EDGE_LOOP('',(#2317,#1191,#2320,#2321));+#2317=ORIENTED_EDGE('',*,*,#2318,.T.);+#2318=EDGE_CURVE('',#1121,#1188,#2319,.T.);+#2319=LINE('',#1122,#396);+#2320=ORIENTED_EDGE('',*,*,#2308,.F.);+#2321=ORIENTED_EDGE('',*,*,#1125,.F.);+#2322=PLANE('',#2323);+#2323=AXIS2_PLACEMENT_3D('',#1122,#335,#13);+#2324=ADVANCED_FACE('',(#2325),#2332,.F.);+#2325=FACE_BOUND('',#2326,.F.);+#2326=EDGE_LOOP('',(#2327,#1186,#2330,#2331));+#2327=ORIENTED_EDGE('',*,*,#2328,.T.);+#2328=EDGE_CURVE('',#1114,#1181,#2329,.T.);+#2329=LINE('',#1115,#396);+#2330=ORIENTED_EDGE('',*,*,#2318,.F.);+#2331=ORIENTED_EDGE('',*,*,#1120,.F.);+#2332=PLANE('',#2333);+#2333=AXIS2_PLACEMENT_3D('',#1115,#13,#385);+#2334=ADVANCED_FACE('',(#2335),#2342,.T.);+#2335=FACE_BOUND('',#2336,.F.);+#2336=EDGE_LOOP('',(#2337,#1179,#2340,#2341));+#2337=ORIENTED_EDGE('',*,*,#2338,.T.);+#2338=EDGE_CURVE('',#1109,#1176,#2339,.T.);+#2339=LINE('',#1110,#396);+#2340=ORIENTED_EDGE('',*,*,#2328,.F.);+#2341=ORIENTED_EDGE('',*,*,#1113,.F.);+#2342=CYLINDRICAL_SURFACE('',#2343,0.23);+#2343=AXIS2_PLACEMENT_3D('',#1118,#956,#972);+#2344=ADVANCED_FACE('',(#2345),#2350,.F.);+#2345=FACE_BOUND('',#2346,.F.);+#2346=EDGE_LOOP('',(#2347,#1174,#2348,#2349));+#2347=ORIENTED_EDGE('',*,*,#1167,.T.);+#2348=ORIENTED_EDGE('',*,*,#2338,.F.);+#2349=ORIENTED_EDGE('',*,*,#1108,.F.);+#2350=PLANE('',#2351);+#2351=AXIS2_PLACEMENT_3D('',#1103,#2273,#963);+#2352=ADVANCED_FACE('',(#2353),#2360,.T.);+#2353=FACE_BOUND('',#2354,.F.);+#2354=EDGE_LOOP('',(#2355,#1352,#2358,#2359));+#2355=ORIENTED_EDGE('',*,*,#2356,.T.);+#2356=EDGE_CURVE('',#1282,#1349,#2357,.T.);+#2357=LINE('',#1283,#396);+#2358=ORIENTED_EDGE('',*,*,#2079,.F.);+#2359=ORIENTED_EDGE('',*,*,#1286,.F.);+#2360=CYLINDRICAL_SURFACE('',#2361,0.23);+#2361=AXIS2_PLACEMENT_3D('',#1246,#956,#1009);+#2362=ADVANCED_FACE('',(#2363),#2370,.F.);+#2363=FACE_BOUND('',#2364,.F.);+#2364=EDGE_LOOP('',(#2365,#1347,#2368,#2369));+#2365=ORIENTED_EDGE('',*,*,#2366,.T.);+#2366=EDGE_CURVE('',#1276,#1343,#2367,.T.);+#2367=LINE('',#1277,#396);+#2368=ORIENTED_EDGE('',*,*,#2356,.F.);+#2369=ORIENTED_EDGE('',*,*,#1281,.F.);+#2370=PLANE('',#2371);+#2371=AXIS2_PLACEMENT_3D('',#1277,#2214,#1002);+#2372=ADVANCED_FACE('',(#2373),#2380,.F.);+#2373=FACE_BOUND('',#2374,.F.);+#2374=EDGE_LOOP('',(#2375,#1341,#2378,#2379));+#2375=ORIENTED_EDGE('',*,*,#2376,.T.);+#2376=EDGE_CURVE('',#1271,#1338,#2377,.T.);+#2377=LINE('',#1272,#396);+#2378=ORIENTED_EDGE('',*,*,#2366,.F.);+#2379=ORIENTED_EDGE('',*,*,#1275,.F.);+#2380=CYLINDRICAL_SURFACE('',#2381,5.E-02);+#2381=AXIS2_PLACEMENT_3D('',#1258,#956,#995);+#2382=ADVANCED_FACE('',(#2383),#2390,.F.);+#2383=FACE_BOUND('',#2384,.F.);+#2384=EDGE_LOOP('',(#2385,#1336,#2388,#2389));+#2385=ORIENTED_EDGE('',*,*,#2386,.T.);+#2386=EDGE_CURVE('',#1266,#1333,#2387,.T.);+#2387=LINE('',#1267,#396);+#2388=ORIENTED_EDGE('',*,*,#2376,.F.);+#2389=ORIENTED_EDGE('',*,*,#1270,.F.);+#2390=PLANE('',#2391);+#2391=AXIS2_PLACEMENT_3D('',#1267,#758,#335);+#2392=ADVANCED_FACE('',(#2393),#2400,.F.);+#2393=FACE_BOUND('',#2394,.F.);+#2394=EDGE_LOOP('',(#2395,#1331,#2398,#2399));+#2395=ORIENTED_EDGE('',*,*,#2396,.T.);+#2396=EDGE_CURVE('',#1261,#1328,#2397,.T.);+#2397=LINE('',#1262,#396);+#2398=ORIENTED_EDGE('',*,*,#2386,.F.);+#2399=ORIENTED_EDGE('',*,*,#1265,.F.);+#2400=PLANE('',#2401);+#2401=AXIS2_PLACEMENT_3D('',#1262,#335,#13);+#2402=ADVANCED_FACE('',(#2403),#2410,.F.);+#2403=FACE_BOUND('',#2404,.F.);+#2404=EDGE_LOOP('',(#2405,#1326,#2408,#2409));+#2405=ORIENTED_EDGE('',*,*,#2406,.T.);+#2406=EDGE_CURVE('',#1254,#1321,#2407,.T.);+#2407=LINE('',#1255,#396);+#2408=ORIENTED_EDGE('',*,*,#2396,.F.);+#2409=ORIENTED_EDGE('',*,*,#1260,.F.);+#2410=PLANE('',#2411);+#2411=AXIS2_PLACEMENT_3D('',#1255,#13,#385);+#2412=ADVANCED_FACE('',(#2413),#2420,.T.);+#2413=FACE_BOUND('',#2414,.F.);+#2414=EDGE_LOOP('',(#2415,#1319,#2418,#2419));+#2415=ORIENTED_EDGE('',*,*,#2416,.T.);+#2416=EDGE_CURVE('',#1249,#1316,#2417,.T.);+#2417=LINE('',#1250,#396);+#2418=ORIENTED_EDGE('',*,*,#2406,.F.);+#2419=ORIENTED_EDGE('',*,*,#1253,.F.);+#2420=CYLINDRICAL_SURFACE('',#2421,0.23);+#2421=AXIS2_PLACEMENT_3D('',#1258,#956,#972);+#2422=ADVANCED_FACE('',(#2423),#2428,.F.);+#2423=FACE_BOUND('',#2424,.F.);+#2424=EDGE_LOOP('',(#2425,#1314,#2426,#2427));+#2425=ORIENTED_EDGE('',*,*,#1307,.T.);+#2426=ORIENTED_EDGE('',*,*,#2416,.F.);+#2427=ORIENTED_EDGE('',*,*,#1248,.F.);+#2428=PLANE('',#2429);+#2429=AXIS2_PLACEMENT_3D('',#1243,#2273,#963);+#2430=ADVANCED_FACE('',(#2431),#2438,.F.);+#2431=FACE_BOUND('',#2432,.F.);+#2432=EDGE_LOOP('',(#2433,#1482,#2436,#2437));+#2433=ORIENTED_EDGE('',*,*,#2434,.T.);+#2434=EDGE_CURVE('',#1413,#1478,#2435,.T.);+#2435=LINE('',#1414,#396);+#2436=ORIENTED_EDGE('',*,*,#2044,.F.);+#2437=ORIENTED_EDGE('',*,*,#1418,.F.);+#2438=PLANE('',#2439);+#2439=AXIS2_PLACEMENT_3D('',#1414,#2214,#1002);+#2440=ADVANCED_FACE('',(#2441),#2448,.F.);+#2441=FACE_BOUND('',#2442,.F.);+#2442=EDGE_LOOP('',(#2443,#1476,#2446,#2447));+#2443=ORIENTED_EDGE('',*,*,#2444,.T.);+#2444=EDGE_CURVE('',#1408,#1473,#2445,.T.);+#2445=LINE('',#1409,#396);+#2446=ORIENTED_EDGE('',*,*,#2434,.F.);+#2447=ORIENTED_EDGE('',*,*,#1412,.F.);+#2448=CYLINDRICAL_SURFACE('',#2449,5.E-02);+#2449=AXIS2_PLACEMENT_3D('',#1395,#956,#995);+#2450=ADVANCED_FACE('',(#2451),#2458,.F.);+#2451=FACE_BOUND('',#2452,.F.);+#2452=EDGE_LOOP('',(#2453,#1471,#2456,#2457));+#2453=ORIENTED_EDGE('',*,*,#2454,.T.);+#2454=EDGE_CURVE('',#1403,#1468,#2455,.T.);+#2455=LINE('',#1404,#396);+#2456=ORIENTED_EDGE('',*,*,#2444,.F.);+#2457=ORIENTED_EDGE('',*,*,#1407,.F.);+#2458=PLANE('',#2459);+#2459=AXIS2_PLACEMENT_3D('',#1404,#758,#335);+#2460=ADVANCED_FACE('',(#2461),#2468,.F.);+#2461=FACE_BOUND('',#2462,.F.);+#2462=EDGE_LOOP('',(#2463,#1466,#2466,#2467));+#2463=ORIENTED_EDGE('',*,*,#2464,.T.);+#2464=EDGE_CURVE('',#1398,#1463,#2465,.T.);+#2465=LINE('',#1399,#396);+#2466=ORIENTED_EDGE('',*,*,#2454,.F.);+#2467=ORIENTED_EDGE('',*,*,#1402,.F.);+#2468=PLANE('',#2469);+#2469=AXIS2_PLACEMENT_3D('',#1399,#335,#13);+#2470=ADVANCED_FACE('',(#2471),#2478,.F.);+#2471=FACE_BOUND('',#2472,.F.);+#2472=EDGE_LOOP('',(#2473,#1461,#2476,#2477));+#2473=ORIENTED_EDGE('',*,*,#2474,.T.);+#2474=EDGE_CURVE('',#1391,#1456,#2475,.T.);+#2475=LINE('',#1392,#396);+#2476=ORIENTED_EDGE('',*,*,#2464,.F.);+#2477=ORIENTED_EDGE('',*,*,#1397,.F.);+#2478=PLANE('',#2479);+#2479=AXIS2_PLACEMENT_3D('',#1392,#13,#385);+#2480=ADVANCED_FACE('',(#2481),#2488,.T.);+#2481=FACE_BOUND('',#2482,.F.);+#2482=EDGE_LOOP('',(#2483,#1454,#2486,#2487));+#2483=ORIENTED_EDGE('',*,*,#2484,.T.);+#2484=EDGE_CURVE('',#1386,#1451,#2485,.T.);+#2485=LINE('',#1387,#396);+#2486=ORIENTED_EDGE('',*,*,#2474,.F.);+#2487=ORIENTED_EDGE('',*,*,#1390,.F.);+#2488=CYLINDRICAL_SURFACE('',#2489,0.23);+#2489=AXIS2_PLACEMENT_3D('',#1395,#956,#972);+#2490=ADVANCED_FACE('',(#2491),#2496,.F.);+#2491=FACE_BOUND('',#2492,.F.);+#2492=EDGE_LOOP('',(#2493,#1449,#2494,#2495));+#2493=ORIENTED_EDGE('',*,*,#1442,.T.);+#2494=ORIENTED_EDGE('',*,*,#2484,.F.);+#2495=ORIENTED_EDGE('',*,*,#1385,.F.);+#2496=PLANE('',#2497);+#2497=AXIS2_PLACEMENT_3D('',#1380,#2273,#963);+#2498=ADVANCED_FACE('',(#2499),#2506,.F.);+#2499=FACE_BOUND('',#2500,.F.);+#2500=EDGE_LOOP('',(#2501,#1611,#2504,#2505));+#2501=ORIENTED_EDGE('',*,*,#2502,.T.);+#2502=EDGE_CURVE('',#1538,#1607,#2503,.T.);+#2503=LINE('',#1539,#58);+#2504=ORIENTED_EDGE('',*,*,#2180,.F.);+#2505=ORIENTED_EDGE('',*,*,#1544,.F.);+#2506=PLANE('',#2507);+#2507=AXIS2_PLACEMENT_3D('',#1539,#2508,#1549);+#2508=DIRECTION('',(-0.986292087668,-1.095004184735E-16,-0.16500884159));+#2509=ADVANCED_FACE('',(#2510),#2517,.F.);+#2510=FACE_BOUND('',#2511,.F.);+#2511=EDGE_LOOP('',(#2512,#1605,#2515,#2516));+#2512=ORIENTED_EDGE('',*,*,#2513,.T.);+#2513=EDGE_CURVE('',#1533,#1602,#2514,.T.);+#2514=LINE('',#1534,#58);+#2515=ORIENTED_EDGE('',*,*,#2502,.F.);+#2516=ORIENTED_EDGE('',*,*,#1537,.F.);+#2517=CYLINDRICAL_SURFACE('',#1541,5.E-02);+#2518=ADVANCED_FACE('',(#2519),#2526,.F.);+#2519=FACE_BOUND('',#2520,.F.);+#2520=EDGE_LOOP('',(#2521,#1600,#2524,#2525));+#2521=ORIENTED_EDGE('',*,*,#2522,.T.);+#2522=EDGE_CURVE('',#1528,#1597,#2523,.T.);+#2523=LINE('',#1529,#58);+#2524=ORIENTED_EDGE('',*,*,#2513,.F.);+#2525=ORIENTED_EDGE('',*,*,#1532,.F.);+#2526=PLANE('',#2527);+#2527=AXIS2_PLACEMENT_3D('',#1529,#758,#73);+#2528=ADVANCED_FACE('',(#2529),#2536,.F.);+#2529=FACE_BOUND('',#2530,.F.);+#2530=EDGE_LOOP('',(#2531,#1595,#2534,#2535));+#2531=ORIENTED_EDGE('',*,*,#2532,.T.);+#2532=EDGE_CURVE('',#1523,#1592,#2533,.T.);+#2533=LINE('',#1524,#58);+#2534=ORIENTED_EDGE('',*,*,#2522,.F.);+#2535=ORIENTED_EDGE('',*,*,#1527,.F.);+#2536=PLANE('',#2537);+#2537=AXIS2_PLACEMENT_3D('',#1524,#73,#13);+#2538=ADVANCED_FACE('',(#2539),#2546,.F.);+#2539=FACE_BOUND('',#2540,.F.);+#2540=EDGE_LOOP('',(#2541,#1590,#2544,#2545));+#2541=ORIENTED_EDGE('',*,*,#2542,.T.);+#2542=EDGE_CURVE('',#1515,#1585,#2543,.T.);+#2543=LINE('',#1516,#58);+#2544=ORIENTED_EDGE('',*,*,#2532,.F.);+#2545=ORIENTED_EDGE('',*,*,#1522,.F.);+#2546=PLANE('',#2547);+#2547=AXIS2_PLACEMENT_3D('',#1516,#13,#28);+#2548=ADVANCED_FACE('',(#2549),#2556,.T.);+#2549=FACE_BOUND('',#2550,.F.);+#2550=EDGE_LOOP('',(#2551,#1583,#2554,#2555));+#2551=ORIENTED_EDGE('',*,*,#2552,.T.);+#2552=EDGE_CURVE('',#1508,#1580,#2553,.T.);+#2553=LINE('',#1509,#58);+#2554=ORIENTED_EDGE('',*,*,#2542,.F.);+#2555=ORIENTED_EDGE('',*,*,#1514,.F.);+#2556=CYLINDRICAL_SURFACE('',#2557,0.23);+#2557=AXIS2_PLACEMENT_3D('',#1519,#87,#1520);+#2558=ADVANCED_FACE('',(#2559),#2564,.F.);+#2559=FACE_BOUND('',#2560,.F.);+#2560=EDGE_LOOP('',(#2561,#1578,#2562,#2563));+#2561=ORIENTED_EDGE('',*,*,#1571,.T.);+#2562=ORIENTED_EDGE('',*,*,#2552,.F.);+#2563=ORIENTED_EDGE('',*,*,#1507,.F.);+#2564=PLANE('',#2565);+#2565=AXIS2_PLACEMENT_3D('',#1502,#2566,#1512);+#2566=DIRECTION('',(0.986292087668,1.095004184735E-16,0.16500884159));+#2567=ADVANCED_FACE('',(#2568),#2575,.T.);+#2568=FACE_BOUND('',#2569,.F.);+#2569=EDGE_LOOP('',(#2570,#1750,#2573,#2574));+#2570=ORIENTED_EDGE('',*,*,#2571,.T.);+#2571=EDGE_CURVE('',#1680,#1747,#2572,.T.);+#2572=LINE('',#1681,#58);+#2573=ORIENTED_EDGE('',*,*,#2135,.F.);+#2574=ORIENTED_EDGE('',*,*,#1684,.F.);+#2575=CYLINDRICAL_SURFACE('',#2576,0.23);+#2576=AXIS2_PLACEMENT_3D('',#1644,#87,#1554);+#2577=ADVANCED_FACE('',(#2578),#2585,.F.);+#2578=FACE_BOUND('',#2579,.F.);+#2579=EDGE_LOOP('',(#2580,#1745,#2583,#2584));+#2580=ORIENTED_EDGE('',*,*,#2581,.T.);+#2581=EDGE_CURVE('',#1674,#1741,#2582,.T.);+#2582=LINE('',#1675,#58);+#2583=ORIENTED_EDGE('',*,*,#2571,.F.);+#2584=ORIENTED_EDGE('',*,*,#1679,.F.);+#2585=PLANE('',#2586);+#2586=AXIS2_PLACEMENT_3D('',#1675,#2508,#1549);+#2587=ADVANCED_FACE('',(#2588),#2595,.F.);+#2588=FACE_BOUND('',#2589,.F.);+#2589=EDGE_LOOP('',(#2590,#1739,#2593,#2594));+#2590=ORIENTED_EDGE('',*,*,#2591,.T.);+#2591=EDGE_CURVE('',#1669,#1736,#2592,.T.);+#2592=LINE('',#1670,#58);+#2593=ORIENTED_EDGE('',*,*,#2581,.F.);+#2594=ORIENTED_EDGE('',*,*,#1673,.F.);+#2595=CYLINDRICAL_SURFACE('',#1677,5.E-02);+#2596=ADVANCED_FACE('',(#2597),#2604,.F.);+#2597=FACE_BOUND('',#2598,.F.);+#2598=EDGE_LOOP('',(#2599,#1734,#2602,#2603));+#2599=ORIENTED_EDGE('',*,*,#2600,.T.);+#2600=EDGE_CURVE('',#1664,#1731,#2601,.T.);+#2601=LINE('',#1665,#58);+#2602=ORIENTED_EDGE('',*,*,#2591,.F.);+#2603=ORIENTED_EDGE('',*,*,#1668,.F.);+#2604=PLANE('',#2605);+#2605=AXIS2_PLACEMENT_3D('',#1665,#758,#73);+#2606=ADVANCED_FACE('',(#2607),#2614,.F.);+#2607=FACE_BOUND('',#2608,.F.);+#2608=EDGE_LOOP('',(#2609,#1729,#2612,#2613));+#2609=ORIENTED_EDGE('',*,*,#2610,.T.);+#2610=EDGE_CURVE('',#1659,#1726,#2611,.T.);+#2611=LINE('',#1660,#58);+#2612=ORIENTED_EDGE('',*,*,#2600,.F.);+#2613=ORIENTED_EDGE('',*,*,#1663,.F.);+#2614=PLANE('',#2615);+#2615=AXIS2_PLACEMENT_3D('',#1660,#73,#13);+#2616=ADVANCED_FACE('',(#2617),#2624,.F.);+#2617=FACE_BOUND('',#2618,.F.);+#2618=EDGE_LOOP('',(#2619,#1724,#2622,#2623));+#2619=ORIENTED_EDGE('',*,*,#2620,.T.);+#2620=EDGE_CURVE('',#1652,#1719,#2621,.T.);+#2621=LINE('',#1653,#58);+#2622=ORIENTED_EDGE('',*,*,#2610,.F.);+#2623=ORIENTED_EDGE('',*,*,#1658,.F.);+#2624=PLANE('',#2625);+#2625=AXIS2_PLACEMENT_3D('',#1653,#13,#28);+#2626=ADVANCED_FACE('',(#2627),#2634,.T.);+#2627=FACE_BOUND('',#2628,.F.);+#2628=EDGE_LOOP('',(#2629,#1717,#2632,#2633));+#2629=ORIENTED_EDGE('',*,*,#2630,.T.);+#2630=EDGE_CURVE('',#1647,#1714,#2631,.T.);+#2631=LINE('',#1648,#58);+#2632=ORIENTED_EDGE('',*,*,#2620,.F.);+#2633=ORIENTED_EDGE('',*,*,#1651,.F.);+#2634=CYLINDRICAL_SURFACE('',#2635,0.23);+#2635=AXIS2_PLACEMENT_3D('',#1656,#87,#1520);+#2636=ADVANCED_FACE('',(#2637),#2642,.F.);+#2637=FACE_BOUND('',#2638,.F.);+#2638=EDGE_LOOP('',(#2639,#1712,#2640,#2641));+#2639=ORIENTED_EDGE('',*,*,#1705,.T.);+#2640=ORIENTED_EDGE('',*,*,#2630,.F.);+#2641=ORIENTED_EDGE('',*,*,#1646,.F.);+#2642=PLANE('',#2643);+#2643=AXIS2_PLACEMENT_3D('',#1641,#2566,#1512);+#2644=ADVANCED_FACE('',(#2645),#2652,.T.);+#2645=FACE_BOUND('',#2646,.F.);+#2646=EDGE_LOOP('',(#2647,#1890,#2650,#2651));+#2647=ORIENTED_EDGE('',*,*,#2648,.T.);+#2648=EDGE_CURVE('',#1820,#1887,#2649,.T.);+#2649=LINE('',#1821,#58);+#2650=ORIENTED_EDGE('',*,*,#2147,.F.);+#2651=ORIENTED_EDGE('',*,*,#1824,.F.);+#2652=CYLINDRICAL_SURFACE('',#2653,0.23);+#2653=AXIS2_PLACEMENT_3D('',#1784,#87,#1554);+#2654=ADVANCED_FACE('',(#2655),#2662,.F.);+#2655=FACE_BOUND('',#2656,.F.);+#2656=EDGE_LOOP('',(#2657,#1885,#2660,#2661));+#2657=ORIENTED_EDGE('',*,*,#2658,.T.);+#2658=EDGE_CURVE('',#1814,#1881,#2659,.T.);+#2659=LINE('',#1815,#58);+#2660=ORIENTED_EDGE('',*,*,#2648,.F.);+#2661=ORIENTED_EDGE('',*,*,#1819,.F.);+#2662=PLANE('',#2663);+#2663=AXIS2_PLACEMENT_3D('',#1815,#2508,#1549);+#2664=ADVANCED_FACE('',(#2665),#2672,.F.);+#2665=FACE_BOUND('',#2666,.F.);+#2666=EDGE_LOOP('',(#2667,#1879,#2670,#2671));+#2667=ORIENTED_EDGE('',*,*,#2668,.T.);+#2668=EDGE_CURVE('',#1809,#1876,#2669,.T.);+#2669=LINE('',#1810,#58);+#2670=ORIENTED_EDGE('',*,*,#2658,.F.);+#2671=ORIENTED_EDGE('',*,*,#1813,.F.);+#2672=CYLINDRICAL_SURFACE('',#1817,5.E-02);+#2673=ADVANCED_FACE('',(#2674),#2681,.F.);+#2674=FACE_BOUND('',#2675,.F.);+#2675=EDGE_LOOP('',(#2676,#1874,#2679,#2680));+#2676=ORIENTED_EDGE('',*,*,#2677,.T.);+#2677=EDGE_CURVE('',#1804,#1871,#2678,.T.);+#2678=LINE('',#1805,#58);+#2679=ORIENTED_EDGE('',*,*,#2668,.F.);+#2680=ORIENTED_EDGE('',*,*,#1808,.F.);+#2681=PLANE('',#2682);+#2682=AXIS2_PLACEMENT_3D('',#1805,#758,#73);+#2683=ADVANCED_FACE('',(#2684),#2691,.F.);+#2684=FACE_BOUND('',#2685,.F.);+#2685=EDGE_LOOP('',(#2686,#1869,#2689,#2690));+#2686=ORIENTED_EDGE('',*,*,#2687,.T.);+#2687=EDGE_CURVE('',#1799,#1866,#2688,.T.);+#2688=LINE('',#1800,#58);+#2689=ORIENTED_EDGE('',*,*,#2677,.F.);+#2690=ORIENTED_EDGE('',*,*,#1803,.F.);+#2691=PLANE('',#2692);+#2692=AXIS2_PLACEMENT_3D('',#1800,#73,#13);+#2693=ADVANCED_FACE('',(#2694),#2701,.F.);+#2694=FACE_BOUND('',#2695,.F.);+#2695=EDGE_LOOP('',(#2696,#1864,#2699,#2700));+#2696=ORIENTED_EDGE('',*,*,#2697,.T.);+#2697=EDGE_CURVE('',#1792,#1859,#2698,.T.);+#2698=LINE('',#1793,#58);+#2699=ORIENTED_EDGE('',*,*,#2687,.F.);+#2700=ORIENTED_EDGE('',*,*,#1798,.F.);+#2701=PLANE('',#2702);+#2702=AXIS2_PLACEMENT_3D('',#1793,#13,#28);+#2703=ADVANCED_FACE('',(#2704),#2711,.T.);+#2704=FACE_BOUND('',#2705,.F.);+#2705=EDGE_LOOP('',(#2706,#1857,#2709,#2710));+#2706=ORIENTED_EDGE('',*,*,#2707,.T.);+#2707=EDGE_CURVE('',#1787,#1854,#2708,.T.);+#2708=LINE('',#1788,#58);+#2709=ORIENTED_EDGE('',*,*,#2697,.F.);+#2710=ORIENTED_EDGE('',*,*,#1791,.F.);+#2711=CYLINDRICAL_SURFACE('',#2712,0.23);+#2712=AXIS2_PLACEMENT_3D('',#1796,#87,#1520);+#2713=ADVANCED_FACE('',(#2714),#2719,.F.);+#2714=FACE_BOUND('',#2715,.F.);+#2715=EDGE_LOOP('',(#2716,#1852,#2717,#2718));+#2716=ORIENTED_EDGE('',*,*,#1845,.T.);+#2717=ORIENTED_EDGE('',*,*,#2707,.F.);+#2718=ORIENTED_EDGE('',*,*,#1786,.F.);+#2719=PLANE('',#2720);+#2720=AXIS2_PLACEMENT_3D('',#1781,#2566,#1512);+#2721=ADVANCED_FACE('',(#2722),#2729,.T.);+#2722=FACE_BOUND('',#2723,.F.);+#2723=EDGE_LOOP('',(#2724,#2030,#2727,#2728));+#2724=ORIENTED_EDGE('',*,*,#2725,.T.);+#2725=EDGE_CURVE('',#1960,#2027,#2726,.T.);+#2726=LINE('',#1961,#58);+#2727=ORIENTED_EDGE('',*,*,#2159,.F.);+#2728=ORIENTED_EDGE('',*,*,#1964,.F.);+#2729=CYLINDRICAL_SURFACE('',#2730,0.23);+#2730=AXIS2_PLACEMENT_3D('',#1924,#87,#1554);+#2731=ADVANCED_FACE('',(#2732),#2739,.F.);+#2732=FACE_BOUND('',#2733,.F.);+#2733=EDGE_LOOP('',(#2734,#2025,#2737,#2738));+#2734=ORIENTED_EDGE('',*,*,#2735,.T.);+#2735=EDGE_CURVE('',#1954,#2021,#2736,.T.);+#2736=LINE('',#1955,#58);+#2737=ORIENTED_EDGE('',*,*,#2725,.F.);+#2738=ORIENTED_EDGE('',*,*,#1959,.F.);+#2739=PLANE('',#2740);+#2740=AXIS2_PLACEMENT_3D('',#1955,#2508,#1549);+#2741=ADVANCED_FACE('',(#2742),#2749,.F.);+#2742=FACE_BOUND('',#2743,.F.);+#2743=EDGE_LOOP('',(#2744,#2019,#2747,#2748));+#2744=ORIENTED_EDGE('',*,*,#2745,.T.);+#2745=EDGE_CURVE('',#1949,#2016,#2746,.T.);+#2746=LINE('',#1950,#58);+#2747=ORIENTED_EDGE('',*,*,#2735,.F.);+#2748=ORIENTED_EDGE('',*,*,#1953,.F.);+#2749=CYLINDRICAL_SURFACE('',#1957,5.E-02);+#2750=ADVANCED_FACE('',(#2751),#2758,.F.);+#2751=FACE_BOUND('',#2752,.F.);+#2752=EDGE_LOOP('',(#2753,#2014,#2756,#2757));+#2753=ORIENTED_EDGE('',*,*,#2754,.T.);+#2754=EDGE_CURVE('',#1944,#2011,#2755,.T.);+#2755=LINE('',#1945,#58);+#2756=ORIENTED_EDGE('',*,*,#2745,.F.);+#2757=ORIENTED_EDGE('',*,*,#1948,.F.);+#2758=PLANE('',#2759);+#2759=AXIS2_PLACEMENT_3D('',#1945,#758,#73);+#2760=ADVANCED_FACE('',(#2761),#2768,.F.);+#2761=FACE_BOUND('',#2762,.F.);+#2762=EDGE_LOOP('',(#2763,#2009,#2766,#2767));+#2763=ORIENTED_EDGE('',*,*,#2764,.T.);+#2764=EDGE_CURVE('',#1939,#2006,#2765,.T.);+#2765=LINE('',#1940,#58);+#2766=ORIENTED_EDGE('',*,*,#2754,.F.);+#2767=ORIENTED_EDGE('',*,*,#1943,.F.);+#2768=PLANE('',#2769);+#2769=AXIS2_PLACEMENT_3D('',#1940,#73,#13);+#2770=ADVANCED_FACE('',(#2771),#2778,.F.);+#2771=FACE_BOUND('',#2772,.F.);+#2772=EDGE_LOOP('',(#2773,#2004,#2776,#2777));+#2773=ORIENTED_EDGE('',*,*,#2774,.T.);+#2774=EDGE_CURVE('',#1932,#1999,#2775,.T.);+#2775=LINE('',#1933,#58);+#2776=ORIENTED_EDGE('',*,*,#2764,.F.);+#2777=ORIENTED_EDGE('',*,*,#1938,.F.);+#2778=PLANE('',#2779);+#2779=AXIS2_PLACEMENT_3D('',#1933,#13,#28);+#2780=ADVANCED_FACE('',(#2781),#2788,.T.);+#2781=FACE_BOUND('',#2782,.F.);+#2782=EDGE_LOOP('',(#2783,#1997,#2786,#2787));+#2783=ORIENTED_EDGE('',*,*,#2784,.T.);+#2784=EDGE_CURVE('',#1927,#1994,#2785,.T.);+#2785=LINE('',#1928,#58);+#2786=ORIENTED_EDGE('',*,*,#2774,.F.);+#2787=ORIENTED_EDGE('',*,*,#1931,.F.);+#2788=CYLINDRICAL_SURFACE('',#2789,0.23);+#2789=AXIS2_PLACEMENT_3D('',#1936,#87,#1520);+#2790=ADVANCED_FACE('',(#2791),#2796,.F.);+#2791=FACE_BOUND('',#2792,.F.);+#2792=EDGE_LOOP('',(#2793,#1992,#2794,#2795));+#2793=ORIENTED_EDGE('',*,*,#1985,.T.);+#2794=ORIENTED_EDGE('',*,*,#2784,.F.);+#2795=ORIENTED_EDGE('',*,*,#1926,.F.);+#2796=PLANE('',#2797);+#2797=AXIS2_PLACEMENT_3D('',#1921,#2566,#1512);+#2798=ADVANCED_FACE('',(#2799),#2800,.F.);+#2799=FACE_BOUND('',#2108,.T.);+#2800=PLANE('',#2801);+#2801=AXIS2_PLACEMENT_3D('',#2115,#758,#59);+#2802=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2806)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#2803,#2804,#2805)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#2803=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#2804=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#2805=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#2806=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#2803,'distance_accuracy_value','confusion accuracy');+#2807=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#2808=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#2809,#2819,#2820,#2821,#2822,#2823,#2824,#2825,#2826,#2827,#2828,#2829,#2830,#2831,#2832,#2841,#2842,#2843,#2844,#2845,#2846,#2847,#2848,#2849,#2850,#2851,#2852,#2853,#2854,#2855,#2856,#2857,#2858,#2859,#2860,#2861,#2862,#2863,#2864,#2865,#2866,#2867,#2868,#2869,#2870,#2871,#2872,#2873,#2874,#2875,#2876,#2877,#2878,#2879,#2880,#2881,#2882,#2883,#2884,#2885,#2886,#2887,#2888,#2889,#2890,#2891,#2892,#2893,#2894,#2895,#2896,#2897,#2898,#2899,#2900,#2901,#2902,#2903,#2904,#2905,#2906,#2907,#2908,#2909,#2910,#2911,#2912,#2913,#2914,#2915,#2916,#2917,#2918,#2919,#2920,#2921,#2922,#2923,#2924,#2925,#2926,#2927,#2928,#2929,#2930,#2931,#2932,#2933,#2934,#2935,#2936,#2937,#2938,#2939,#2940,#2941,#2942,#2943,#2944,#2945,#2946,#2947,#2948,#2949,#2950,#2951,#2952,#2953,#2954,#2955,#2956,#2957,#2958,#2959,#2960,#2961,#2962,#2963,#2964,#2965,#2966,#2967,#2968,#2969,#2970,#2971,#2972),#2802);+#2809=STYLED_ITEM('color',(#2810),#17);+#2810=PRESENTATION_STYLE_ASSIGNMENT((#2811,#2817));+#2811=SURFACE_STYLE_USAGE(.BOTH.,#2812);+#2812=SURFACE_SIDE_STYLE('',(#2813));+#2813=SURFACE_STYLE_FILL_AREA(#2814);+#2814=FILL_AREA_STYLE('',(#2815));+#2815=FILL_AREA_STYLE_COLOUR('',#2816);+#2816=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#2817=CURVE_STYLE('',#2818,POSITIVE_LENGTH_MEASURE(0.1),#2816);+#2818=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#2819=STYLED_ITEM('color',(#2810),#43);+#2820=STYLED_ITEM('color',(#2810),#96);+#2821=STYLED_ITEM('color',(#2810),#109);+#2822=STYLED_ITEM('color',(#2810),#128);+#2823=STYLED_ITEM('color',(#2810),#141);+#2824=STYLED_ITEM('color',(#2810),#186);+#2825=STYLED_ITEM('color',(#2810),#231);+#2826=STYLED_ITEM('color',(#2810),#244);+#2827=STYLED_ITEM('color',(#2810),#257);+#2828=STYLED_ITEM('color',(#2810),#266);+#2829=STYLED_ITEM('color',(#2810),#281);+#2830=STYLED_ITEM('color',(#2810),#345);+#2831=STYLED_ITEM('color',(#2810),#356);+#2832=STYLED_ITEM('color',(#2833),#375);+#2833=PRESENTATION_STYLE_ASSIGNMENT((#2834,#2840));+#2834=SURFACE_STYLE_USAGE(.BOTH.,#2835);+#2835=SURFACE_SIDE_STYLE('',(#2836));+#2836=SURFACE_STYLE_FILL_AREA(#2837);+#2837=FILL_AREA_STYLE('',(#2838));+#2838=FILL_AREA_STYLE_COLOUR('',#2839);+#2839=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#2840=CURVE_STYLE('',#2818,POSITIVE_LENGTH_MEASURE(0.1),#2839);+#2841=STYLED_ITEM('color',(#2810),#400);+#2842=STYLED_ITEM('color',(#2833),#418);+#2843=STYLED_ITEM('color',(#2810),#439);+#2844=STYLED_ITEM('color',(#2833),#457);+#2845=STYLED_ITEM('color',(#2810),#478);+#2846=STYLED_ITEM('color',(#2833),#496);+#2847=STYLED_ITEM('color',(#2810),#517);+#2848=STYLED_ITEM('color',(#2810),#527);+#2849=STYLED_ITEM('color',(#2833),#539);+#2850=STYLED_ITEM('color',(#2810),#560);+#2851=STYLED_ITEM('color',(#2833),#578);+#2852=STYLED_ITEM('color',(#2810),#599);+#2853=STYLED_ITEM('color',(#2833),#617);+#2854=STYLED_ITEM('color',(#2810),#638);+#2855=STYLED_ITEM('color',(#2833),#656);+#2856=STYLED_ITEM('color',(#2810),#677);+#2857=STYLED_ITEM('color',(#2810),#694);+#2858=STYLED_ITEM('color',(#2810),#709);+#2859=STYLED_ITEM('color',(#2810),#724);+#2860=STYLED_ITEM('color',(#2833),#735);+#2861=STYLED_ITEM('color',(#2810),#759);+#2862=STYLED_ITEM('color',(#2810),#805);+#2863=STYLED_ITEM('color',(#2810),#819);+#2864=STYLED_ITEM('color',(#2810),#833);+#2865=STYLED_ITEM('color',(#2810),#847);+#2866=STYLED_ITEM('color',(#2833),#893);+#2867=STYLED_ITEM('color',(#2810),#913);+#2868=STYLED_ITEM('color',(#2833),#944);+#2869=STYLED_ITEM('color',(#2833),#1015);+#2870=STYLED_ITEM('color',(#2833),#1031);+#2871=STYLED_ITEM('color',(#2810),#1084);+#2872=STYLED_ITEM('color',(#2833),#1095);+#2873=STYLED_ITEM('color',(#2833),#1155);+#2874=STYLED_ITEM('color',(#2833),#1171);+#2875=STYLED_ITEM('color',(#2810),#1224);+#2876=STYLED_ITEM('color',(#2833),#1235);+#2877=STYLED_ITEM('color',(#2833),#1295);+#2878=STYLED_ITEM('color',(#2833),#1311);+#2879=STYLED_ITEM('color',(#2810),#1364);+#2880=STYLED_ITEM('color',(#2833),#1372);+#2881=STYLED_ITEM('color',(#2833),#1430);+#2882=STYLED_ITEM('color',(#2833),#1446);+#2883=STYLED_ITEM('color',(#2833),#1494);+#2884=STYLED_ITEM('color',(#2833),#1559);+#2885=STYLED_ITEM('color',(#2833),#1575);+#2886=STYLED_ITEM('color',(#2810),#1623);+#2887=STYLED_ITEM('color',(#2833),#1633);+#2888=STYLED_ITEM('color',(#2833),#1693);+#2889=STYLED_ITEM('color',(#2833),#1709);+#2890=STYLED_ITEM('color',(#2810),#1762);+#2891=STYLED_ITEM('color',(#2833),#1773);+#2892=STYLED_ITEM('color',(#2833),#1833);+#2893=STYLED_ITEM('color',(#2833),#1849);+#2894=STYLED_ITEM('color',(#2810),#1902);+#2895=STYLED_ITEM('color',(#2833),#1913);+#2896=STYLED_ITEM('color',(#2833),#1973);+#2897=STYLED_ITEM('color',(#2833),#1989);+#2898=STYLED_ITEM('color',(#2833),#2040);+#2899=STYLED_ITEM('color',(#2833),#2050);+#2900=STYLED_ITEM('color',(#2833),#2062);+#2901=STYLED_ITEM('color',(#2833),#2074);+#2902=STYLED_ITEM('color',(#2810),#2086);+#2903=STYLED_ITEM('color',(#2810),#2120);+#2904=STYLED_ITEM('color',(#2833),#2130);+#2905=STYLED_ITEM('color',(#2833),#2142);+#2906=STYLED_ITEM('color',(#2833),#2154);+#2907=STYLED_ITEM('color',(#2810),#2166);+#2908=STYLED_ITEM('color',(#2833),#2176);+#2909=STYLED_ITEM('color',(#2810),#2186);+#2910=STYLED_ITEM('color',(#2833),#2194);+#2911=STYLED_ITEM('color',(#2833),#2204);+#2912=STYLED_ITEM('color',(#2833),#2215);+#2913=STYLED_ITEM('color',(#2833),#2225);+#2914=STYLED_ITEM('color',(#2833),#2235);+#2915=STYLED_ITEM('color',(#2833),#2245);+#2916=STYLED_ITEM('color',(#2833),#2255);+#2917=STYLED_ITEM('color',(#2833),#2265);+#2918=STYLED_ITEM('color',(#2833),#2274);+#2919=STYLED_ITEM('color',(#2833),#2284);+#2920=STYLED_ITEM('color',(#2833),#2294);+#2921=STYLED_ITEM('color',(#2833),#2304);+#2922=STYLED_ITEM('color',(#2833),#2314);+#2923=STYLED_ITEM('color',(#2833),#2324);+#2924=STYLED_ITEM('color',(#2833),#2334);+#2925=STYLED_ITEM('color',(#2833),#2344);+#2926=STYLED_ITEM('color',(#2833),#2352);+#2927=STYLED_ITEM('color',(#2833),#2362);+#2928=STYLED_ITEM('color',(#2833),#2372);+#2929=STYLED_ITEM('color',(#2833),#2382);+#2930=STYLED_ITEM('color',(#2833),#2392);+#2931=STYLED_ITEM('color',(#2833),#2402);+#2932=STYLED_ITEM('color',(#2833),#2412);+#2933=STYLED_ITEM('color',(#2833),#2422);+#2934=STYLED_ITEM('color',(#2833),#2430);+#2935=STYLED_ITEM('color',(#2833),#2440);+#2936=STYLED_ITEM('color',(#2833),#2450);+#2937=STYLED_ITEM('color',(#2833),#2460);+#2938=STYLED_ITEM('color',(#2833),#2470);+#2939=STYLED_ITEM('color',(#2833),#2480);+#2940=STYLED_ITEM('color',(#2833),#2490);+#2941=STYLED_ITEM('color',(#2833),#2498);+#2942=STYLED_ITEM('color',(#2833),#2509);+#2943=STYLED_ITEM('color',(#2833),#2518);+#2944=STYLED_ITEM('color',(#2833),#2528);+#2945=STYLED_ITEM('color',(#2833),#2538);+#2946=STYLED_ITEM('color',(#2833),#2548);+#2947=STYLED_ITEM('color',(#2833),#2558);+#2948=STYLED_ITEM('color',(#2833),#2567);+#2949=STYLED_ITEM('color',(#2833),#2577);+#2950=STYLED_ITEM('color',(#2833),#2587);+#2951=STYLED_ITEM('color',(#2833),#2596);+#2952=STYLED_ITEM('color',(#2833),#2606);+#2953=STYLED_ITEM('color',(#2833),#2616);+#2954=STYLED_ITEM('color',(#2833),#2626);+#2955=STYLED_ITEM('color',(#2833),#2636);+#2956=STYLED_ITEM('color',(#2833),#2644);+#2957=STYLED_ITEM('color',(#2833),#2654);+#2958=STYLED_ITEM('color',(#2833),#2664);+#2959=STYLED_ITEM('color',(#2833),#2673);+#2960=STYLED_ITEM('color',(#2833),#2683);+#2961=STYLED_ITEM('color',(#2833),#2693);+#2962=STYLED_ITEM('color',(#2833),#2703);+#2963=STYLED_ITEM('color',(#2833),#2713);+#2964=STYLED_ITEM('color',(#2833),#2721);+#2965=STYLED_ITEM('color',(#2833),#2731);+#2966=STYLED_ITEM('color',(#2833),#2741);+#2967=STYLED_ITEM('color',(#2833),#2750);+#2968=STYLED_ITEM('color',(#2833),#2760);+#2969=STYLED_ITEM('color',(#2833),#2770);+#2970=STYLED_ITEM('color',(#2833),#2780);+#2971=STYLED_ITEM('color',(#2833),#2790);+#2972=STYLED_ITEM('color',(#2973),#2798);+#2973=PRESENTATION_STYLE_ASSIGNMENT((#2974,#2980));+#2974=SURFACE_STYLE_USAGE(.BOTH.,#2975);+#2975=SURFACE_SIDE_STYLE('',(#2976));+#2976=SURFACE_STYLE_FILL_AREA(#2977);+#2977=FILL_AREA_STYLE('',(#2978));+#2978=FILL_AREA_STYLE_COLOUR('',#2979);+#2979=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#2980=CURVE_STYLE('',#2818,POSITIVE_LENGTH_MEASURE(0.1),#2979);+ENDSEC;+END-ISO-10303-21;

viewers/footprint.htmladded+1

@@ -0,0 +1 @@+<!doctype html><title>tps77301dgkr</title>\ No newline at end of file

viewers/symbol.htmladded+1

@@ -0,0 +1 @@+<!doctype html><title>tps77301dgkr</title>\ No newline at end of file

Verified TPS77301DGKR

Verification log 1 record

Publish 0.1.0