main
Ray
tps76950dbvr: specified limits as data (metadata.characteristics, 31 rows from the datasheet)
c714c03
TPS76950DBVR
Texas Instruments · DC-DC Converters · SOT-23-5
TPS76950DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin; VIN operating range 2.7 V to 10 V (old chip), absolute maximum 13.5 V; place 1.0 µF minimum input capacitor from IN to GND as close to the device as possible. |
| 2 | GND | power_in | Ground reference; all voltages are referenced to this pin; connect input and output bypass capacitors to GND as close to the device as possible. |
| 3 | EN | input | Active-low enable input; EN below 0.9 V (low threshold, old chip) enables the output, EN above 1.7 V (high threshold, old chip) disables the output; connect to GND if enable function is not required. |
| 4 | NC | unconnected | No-connect pin for fixed-output versions (TPS76950); datasheet states 'do not connect' for fixed variants; internally unused. |
| 5 | OUT | power_out | Regulated 5.0 V output pin; maximum 100 mA load current with typical dropout voltage of 71 mV at 100 mA (old chip); place ≥4.7 µF output capacitor with ESR 0.2 Ω to 10 Ω from OUT to GND as close to the device as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (fixed, new chip) | VOUT | 0.988 | 1.012 | × VOUT | 10µA ≤ IOUT ≤ 100mA,VOUT(nom) + 1V < VIN < 16V | 5 | |
| Quiescent current (fixed, new chip) | IQ | 55 | 95 | µA | EN = 0V,IOUT = 0mA(固定) | 5 | |
| High-level enable input voltage (new chip) | VEN(HI) | 1.6 | V | 2.5V ≤ VIN ≤ 16V | 6 | ||
| Low-level enable input voltage (new chip) | VEN(LOW) | 0.415 | V | 2.5V ≤ VIN ≤ 16V | 6 | ||
| EN input current (new chip) | IEN | -0.75 | -0.4 | 0.02 | µA | EN = 0V | 6 |
| EN input current (new chip, high EN) | IEN | -0.01 | 0.01 | µA | EN = 6V | 6 | |
| Standby current (new chip) | ISTANDBY | 0.9 | 2.75 | µA | EN = VIN,2.5V < VIN < 16V | 6 | |
| Output current limit (new chip) | ICL | 370 | 450 | mA | VOUT = 0V | 6 | |
| UVLO rising threshold (new chip) | VUVLO+ | 2.2 | 2.4 | V | VIN 上升,–40℃ ≤ TJ ≤ 125℃ | 7 | |
| UVLO falling threshold (new chip) | VUVLO– | 1.9 | 2.07 | V | VIN 下降,–40℃ ≤ TJ ≤ 125℃ | 7 | |
| Dropout voltage at 50 mA over temperature (TPS76950 new chip) | VDO | 184 | mV | IOUT = 50mA,TJ = –40℃ 至 125℃ | 7 | ||
| Dropout voltage at 100 mA over temperature (TPS76950 new chip) | VDO | 218 | mV | IOUT = 100mA,TJ = –40℃ 至 125℃ | 7 | ||
| Continuous input voltage (new chip) | VIN | -0.3 | 18 | V | 3 | ||
| Output voltage (new chip) | VOUT | -0.3 | V | 3 | |||
| EN pin voltage (new chip) | VEN | -0.3 | 18 | V | 3 | ||
| Operating junction temperature (new chip) | TJ | -55 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| ESD human body model (new chip) | V(ESD) | -3000 | 3000 | V | HBM,ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD charged device model (new chip) | V(ESD) | -1000 | 1000 | V | CDM,JEDEC JESD22-C101 | 4 | |
| Input voltage (new chip) | VIN | 2.5 | 16 | V | 4 | ||
| Output voltage (new chip) | VOUT | 1.2 | 5.5 | V | 4 | ||
| Enable voltage (new chip) | VEN | 0 | 16 | V | 4 | ||
| Output current | IOUT | 0 | 100 | mA | 4 | ||
| Output capacitor (new chip) | COUT | 2.2 | 200 | µF | 4 | ||
| Output capacitor ESR range (new chip) | ESR | 0 | 3 | Ω | 4 | ||
| Operating junction temperature (recommended) | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (new chip, DBV-5) | RθJA | 178.6 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (new chip, DBV-5) | RθJC(top) | 77.9 | °C/W | 4 | |||
| Junction-to-board thermal resistance (new chip, DBV-5) | RθJB | 47.2 | °C/W | 4 | |||
| Junction-to-top characterization parameter (new chip, DBV-5) | ψJT | 15.9 | °C/W | 4 | |||
| Junction-to-board characterization parameter (new chip, DBV-5) | ψJB | 46.9 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPS76950DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps76950dbvr-etched.step/tps76950dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76950dbvr.step/tps76950dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
ff01fa906899703c, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS76950DBVR
**Texas Instruments** · DC-DC Converters · SOT-23-5
TPS76950DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin; VIN operating range 2.7 V to 10 V (old chip), absolute maximum 13.5 V; place 1.0 µF minimum input capacitor from IN to GND as close to the device as possible. |
| 2 | GND | power_in | Ground reference; all voltages are referenced to this pin; connect input and output bypass capacitors to GND as close to the device as possible. |
| 3 | EN | input | Active-low enable input; EN below 0.9 V (low threshold, old chip) enables the output, EN above 1.7 V (high threshold, old chip) disables the output; connect to GND if enable function is not required. |
| 4 | NC | unconnected | No-connect pin for fixed-output versions (TPS76950); datasheet states 'do not connect' for fixed variants; internally unused. |
| 5 | OUT | power_out | Regulated 5.0 V output pin; maximum 100 mA load current with typical dropout voltage of 71 mV at 100 mA (old chip); place ≥4.7 µF output capacitor with ESR 0.2 Ω to 10 Ω from OUT to GND as close to the device as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (fixed, new chip) | VOUT | 0.988 | | 1.012 | × VOUT | 10µA ≤ IOUT ≤ 100mA,VOUT(nom) + 1V < VIN < 16V | 5 |
| Quiescent current (fixed, new chip) | IQ | | 55 | 95 | µA | EN = 0V,IOUT = 0mA(固定) | 5 |
| High-level enable input voltage (new chip) | VEN(HI) | 1.6 | | | V | 2.5V ≤ VIN ≤ 16V | 6 |
| Low-level enable input voltage (new chip) | VEN(LOW) | | | 0.415 | V | 2.5V ≤ VIN ≤ 16V | 6 |
| EN input current (new chip) | IEN | -0.75 | -0.4 | 0.02 | µA | EN = 0V | 6 |
| EN input current (new chip, high EN) | IEN | -0.01 | | 0.01 | µA | EN = 6V | 6 |
| Standby current (new chip) | ISTANDBY | | 0.9 | 2.75 | µA | EN = VIN,2.5V < VIN < 16V | 6 |
| Output current limit (new chip) | ICL | 370 | | 450 | mA | VOUT = 0V | 6 |
| UVLO rising threshold (new chip) | VUVLO+ | 2.2 | 2.4 | | V | VIN 上升,–40℃ ≤ TJ ≤ 125℃ | 7 |
| UVLO falling threshold (new chip) | VUVLO– | 1.9 | 2.07 | | V | VIN 下降,–40℃ ≤ TJ ≤ 125℃ | 7 |
| Dropout voltage at 50 mA over temperature (TPS76950 new chip) | VDO | | | 184 | mV | IOUT = 50mA,TJ = –40℃ 至 125℃ | 7 |
| Dropout voltage at 100 mA over temperature (TPS76950 new chip) | VDO | | | 218 | mV | IOUT = 100mA,TJ = –40℃ 至 125℃ | 7 |
| Continuous input voltage (new chip) | VIN | -0.3 | | 18 | V | | 3 |
| Output voltage (new chip) | VOUT | -0.3 | | | V | | 3 |
| EN pin voltage (new chip) | VEN | -0.3 | | 18 | V | | 3 |
| Operating junction temperature (new chip) | TJ | -55 | | 150 | °C | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| ESD human body model (new chip) | V(ESD) | -3000 | | 3000 | V | HBM,ANSI/ESDA/JEDEC JS-001 | 4 |
| ESD charged device model (new chip) | V(ESD) | -1000 | | 1000 | V | CDM,JEDEC JESD22-C101 | 4 |
| Input voltage (new chip) | VIN | 2.5 | | 16 | V | | 4 |
| Output voltage (new chip) | VOUT | 1.2 | | 5.5 | V | | 4 |
| Enable voltage (new chip) | VEN | 0 | | 16 | V | | 4 |
| Output current | IOUT | 0 | | 100 | mA | | 4 |
| Output capacitor (new chip) | COUT | 2.2 | | 200 | µF | | 4 |
| Output capacitor ESR range (new chip) | ESR | 0 | | 3 | Ω | | 4 |
| Operating junction temperature (recommended) | TJ | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance (new chip, DBV-5) | RθJA | | 178.6 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance (new chip, DBV-5) | RθJC(top) | | 77.9 | | °C/W | | 4 |
| Junction-to-board thermal resistance (new chip, DBV-5) | RθJB | | 47.2 | | °C/W | | 4 |
| Junction-to-top characterization parameter (new chip, DBV-5) | ψJT | | 15.9 | | °C/W | | 4 |
| Junction-to-board characterization parameter (new chip, DBV-5) | ψJB | | 46.9 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `TPS76950DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tps76950dbvr-etched.step` / `tps76950dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps76950dbvr.step` / `tps76950dbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps769) (45 pp, sha256 `ff01fa906899703c`, retrieved 2026-09-26, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps76950dbvr-datasheet.pdf)