main
History Download
Ray Publish 0.1.0 1af8fca

TPS76918DBVR

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS76918DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input pin; use the recommended input capacitor (1 µF) placed as close to the IN and GND pins as possible.
2 GND power_in Ground.
3 EN input Enable pin; driving it low enables the device and driving it high disables the device, with thresholds listed in the Electrical Characteristics table.
4 FB/NC unconnected On the fixed-output version (TPS76918) this pin is a no connection on the legacy chip and must not be connected on the new chip; it is the feedback pin only on the adjustable TPS76901.
5 OUT power_out Output pin; use the recommended output capacitor (2.2 µF minimum on the new chip, 4.7 µF on the legacy chip) placed as close to the OUT and GND pins as possible.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance, fixed legacy chip VOUT 0.97 1.03 ×VOUT 10µA ≤ IOUT ≤ 100mA, VOUT(nom) + 1V < VIN < 10V 5
Output current limit ICL 350 750 mA Legacy chip, VOUT = 0V 6
Standby current ISTANDBY 1 2 µA Legacy chip, EN = VIN, 2.7V < VIN < 10V 6
High level enable input voltage EN 1.7 V Legacy chip, 2.7V ≤ VIN ≤ 10V 6
Low level enable input voltage EN 0.9 V Legacy chip, 2.7V ≤ VIN ≤ 10V 6
Input current (EN) at EN = 0V IEN -1 0 1 µA Legacy chip, EN = 0V 6
Input current (EN) at EN = VIN IEN -1 1 µA Legacy chip, EN = VIN 6
Output voltage line regulation ΔVOUT(ΔVIN) 0.04 0.07 %/V Legacy chip, VOUT(NOM) +1.0V ≤ VIN ≤ 10V, IOUT = 100mA, TJ = 25℃ 5
Quiescent current IQ 17 µA Legacy chip, EN = 0V, 0mA < IOUT < 100mA, TJ = +25°C 5
Quiescent current IQ 28 µA Legacy chip, EN = 0V, IOUT = 100mA 5
Output voltage load regulation ΔVOUT(ΔIOUT) 12 mV Legacy chip, 0mA ≤ IOUT ≤ 100mA, TJ = 25°C 5
Output noise voltage Vn 190 µVRMS Legacy chip, BW = 300Hz to 50kHz, COUT = 10µF, TJ = 25℃ 5
Power-supply ripple rejection PSRR 60 dB Legacy chip, IOUT = 100mA, f = 1kHz, COUT = 10µF, TJ = 25 ℃ 6
Continuous input voltage (legacy chip) VIN -0.3 13.5 V 3
Output voltage (legacy chip) VOUT -0.3 7 V 3
EN pin voltage (legacy chip) VEN -0.3 V max is VIN + 0.3 3
Operating junction temperature (legacy chip) TJ -40 150 °C 3
Storage temperature Tstg -65 150 °C 3
ESD HBM (legacy chip) V(ESD) -2000 2000 V Human body model, ANSI/ESDA/JEDEC JS-001 4
Supply input voltage (legacy chip) VIN 2.7 10 V 4
Enable voltage (legacy chip) VEN 0 V max is VIN 4
Output current IOUT 0 100 mA 4
Input capacitor CIN 1 μF 4
Output capacitor (legacy chip) COUT 4.7 μF 4
ESR range (legacy chip) ESR 0.2 10 Ω 4
Operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance, Low K RθJA 259 ℃/W Legacy chip, DBV, Low K 5
Junction-to-ambient thermal resistance, High K RθJA 180 ℃/W Legacy chip, DBV, High K 5
Junction-to-case thermal resistance RθJC 65.8 ℃/W Legacy chip, DBV 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS76918DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps76918dbvr-etched.step / tps76918dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps76918dbvr.step / tps76918dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 8b45e7f7d5e0947e, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF