component
TPS76912DBVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+42@@ -0,0 +1,42 @@+# TPS76912DBVR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5++TPS76912DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input pin for the regulator; the datasheet recommends the input capacitor values in the Recommended Operating Conditions (CIN min 1 µF), placed as close as possible to the IN and GND pins, and the new-chip input range is 2.5 V to 16 V (absolute maximum 18 V). |+| 2 | GND | power_in | Ground reference pin; all voltages in the datasheet are referenced to GND. |+| 3 | EN | input | Active-low enable pin: driving it low enables the device and driving it high disables it, with new-chip EN voltage limits of 0 V to 16 V, a high-level threshold of 1.6 V minimum and a low-level threshold of 0.415 V maximum; EN has an internal pull-up, so leaving it floating disables the LDO. |+| 4 | FB/NC | unconnected | On the fixed-voltage version this pin is not connected (new chip: do not connect); it is the feedback input only on the adjustable TPS76901-Q1 version, where it must not be left floating. |+| 5 | OUT | power_out | Regulated output pin; the datasheet recommends the output capacitor values in the Recommended Operating Conditions (COUT min 2.2 µF for the new chip, ESR range 0 to 3 Ω), placed as close as possible to the OUT and GND pins, and the output voltage is limited to 1.2 V to 5 V for fixed versions (new chip). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOT-23-5 |+| Category | Power Management (PMIC) |+| Pins | 5 |++## CAD (KiCad official)++- Symbol: `TPS76912DBVR`+- Footprint: `Package_TO_SOT_SMD:SOT-23-5`+- 3D model: SOT-23-5 (KiCad packages3D, STEP)+- 3D model files: `tps76912dbvr-etched.step` / `tps76912dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps76912dbvr.step` / `tps76912dbvr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps769) (45 pp, sha256 `ff01fa906899703c`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps76912dbvr-datasheet.pdf)
page.jsonadded+182@@ -0,0 +1,182 @@+{+ "slug": "tps76912dbvr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps76912dbvr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps76912dbvr.kicad_sym",+ "tps76912dbvr.kicad_mod",+ "tps76912dbvr.glb",+ "tps76912dbvr.step",+ "tps76912dbvr.lbr",+ "docs/hero.png",+ "docs/tps76912dbvr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps76912dbvr-hero.glb",+ "tps76912dbvr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS76912DBVR",+ "manufacturer": "Texas Instruments",+ "package": "SOT-23-5",+ "pin_count": 5,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps769",+ "parts": {+ "symbol": "tps76912dbvr.kicad_sym",+ "footprint": "tps76912dbvr.kicad_mod",+ "model_3d": "tps76912dbvr-hero.glb",+ "model_3d_plain": "tps76912dbvr.glb",+ "model_3d_step": "tps76912dbvr-etched.step",+ "model_3d_step_plain": "tps76912dbvr.step",+ "lbr": "tps76912dbvr.lbr"+ },+ "distributor_links": {+ "lcsc": "C523754",+ "digikey": "296-11031-2-ND",+ "mouser": "595-TPS76912DBVR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T00:14:09Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-11031-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS76912DBVR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Input pin for the regulator; the datasheet recommends the input capacitor values in the Recommended Operating Conditions (CIN min 1 µF), placed as close as possible to the IN and GND pins, and the new-chip input range is 2.5 V to 16 V (absolute maximum 18 V)."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference pin; all voltages in the datasheet are referenced to GND."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Active-low enable pin: driving it low enables the device and driving it high disables it, with new-chip EN voltage limits of 0 V to 16 V, a high-level threshold of 1.6 V minimum and a low-level threshold of 0.415 V maximum; EN has an internal pull-up, so leaving it floating disables the LDO."+ },+ {+ "number": "4",+ "name": "FB/NC",+ "type": "unconnected",+ "description": "On the fixed-voltage version this pin is not connected (new chip: do not connect); it is the feedback input only on the adjustable TPS76901-Q1 version, where it must not be left floating."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output pin; the datasheet recommends the output capacitor values in the Recommended Operating Conditions (COUT min 2.2 µF for the new chip, ESR range 0 to 3 Ω), placed as close as possible to the OUT and GND pins, and the output voltage is limited to 1.2 V to 5 V for fixed versions (new chip)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 4 is FB/NC: it is a feedback input only on the adjustable version (TPS76901-Q1) and no-connect o; The datasheet covers both old-chip and new-chip (M3) devices with different limits. The ordering add; Source text is Chinese; descriptions were translated into English and condensed from the pin functio"+ ],+ "pages_sent": 23,+ "cost_usd": 0.1212,+ "at": "2026-10-08T00:13:50"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps769",+ "pages": 45,+ "sha256": "ff01fa906899703c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps76912dbvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps76912dbvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f2fbd1465343d5f8b8c4e382372b77213a5ba0711b6ed1dae9a764711541ee56",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}