component
TPS76833QPWPRQ1
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS76833QPWPRQ1
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HTSSOP-20
TPS76833QPWPRQ1 from Texas Instruments, in a HTSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND/HSINK | power_in | Ground and heatsink connection; the datasheet lists it as ground and heatsink. |
| 2 | GND/HSINK | power_in | Ground and heatsink connection; the datasheet lists it as ground and heatsink. |
| 3 | GND | power_in | LDO ground reference for the regulator. |
| 4 | NC | unconnected | No internal connection. |
| 5 | EN | input | Enable input; a TTL high signal shuts down the regulator, and the voltage at EN is limited to -0.3 V to VI + 0.3 V. |
| 6 | IN | input | Regulator input; the recommended input voltage is 2.7 V to 10 V, with an absolute maximum of 13.5 V. |
| 7 | IN | input | Regulator input; the recommended input voltage is 2.7 V to 10 V, with an absolute maximum of 13.5 V. |
| 8 | NC | unconnected | No internal connection. |
| 9 | GND/HSINK | power_in | Ground and heatsink connection; the datasheet lists it as ground and heatsink. |
| 10 | GND/HSINK | power_in | Ground and heatsink connection; the datasheet lists it as ground and heatsink. |
| 11 | GND/HSINK | power_in | Ground and heatsink connection; the datasheet lists it as ground and heatsink. |
| 12 | GND/HSINK | power_in | Ground and heatsink connection; the datasheet lists it as ground and heatsink. |
| 13 | OUT | output | Regulated output voltage; the output current is rated 0 to 1 A and an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω is required between OUT and GND. |
| 14 | OUT | output | Regulated output voltage; the output current is rated 0 to 1 A and an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω is required between OUT and GND. |
| 15 | FB/NC | input | Feedback input for the adjustable version only; it is a no-connect on fixed-output options, so it must not be used as a feedback pin on this fixed device. |
| 16 | PG | output | Active-high open-drain power-good output, with a maximum PG voltage of 16.5 V. |
| 17 | NC | unconnected | No internal connection. |
| 18 | NC | unconnected | No internal connection. |
| 19 | GND/HSINK | power_in | Ground and heatsink connection; the datasheet lists it as ground and heatsink. |
| 20 | GND/HSINK | power_in | Ground and heatsink connection; the datasheet lists it as ground and heatsink. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20 |
| Category | Power Management (PMIC) |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
TPS76833QPWPRQ1 - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps76833qpwprq1-etched.step/tps76833qpwprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76833qpwprq1.step/tps76833qpwprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
e77b9cc0b627fa86, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).