component
TPS76833QPWPR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 11h ago |
| viewers | 11h ago |
| package.json | 11h ago |
| page.json | 11h ago |
| README.md | 11h ago |
| tps76833qpwpr-etched.glb | 11h ago |
| tps76833qpwpr-etched.step | 11h ago |
| tps76833qpwpr-hero.glb | 11h ago |
| tps76833qpwpr-hero.overlay.json | 11h ago |
| tps76833qpwpr.glb | 11h ago |
| tps76833qpwpr.kicad_mod | 11h ago |
| tps76833qpwpr.kicad_sym | 11h ago |
| tps76833qpwpr.lbr | 11h ago |
| tps76833qpwpr.step | 11h ago |
TPS76833QPWPR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HTSSOP-20
TPS76833QPWPR from Texas Instruments, in a HTSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND/HSINK | power_in | Regulator ground and heatsink connection point for thermal dissipation |
| 2 | GND/HSINK | power_in | Regulator ground and heatsink connection point for thermal dissipation |
| 3 | GND | power_in | Regulator ground reference |
| 4 | NC | unconnected | No internal connection |
| 5 | EN | input | Enable input; logic level ≥1.7 V enables regulator, ≤0.9 V shuts down device to <1 µA quiescent current |
| 6 | IN | power_in | Input supply voltage, rated 2.7 V to 10 V |
| 7 | IN | power_in | Input supply voltage, rated 2.7 V to 10 V |
| 8 | NC | unconnected | No internal connection |
| 9 | GND/HSINK | power_in | Regulator ground and heatsink connection point for thermal dissipation |
| 10 | GND/HSINK | power_in | Regulator ground and heatsink connection point for thermal dissipation |
| 11 | GND/HSINK | power_in | Regulator ground and heatsink connection point for thermal dissipation |
| 12 | GND/HSINK | power_in | Regulator ground and heatsink connection point for thermal dissipation |
| 13 | OUT | power_out | Regulated output voltage 3.3 V nominal ±2% (TPS76833) |
| 14 | OUT | power_out | Regulated output voltage 3.3 V nominal ±2% (TPS76833) |
| 15 | FB/NC | unconnected | No internal connection in fixed output versions; feedback input for adjustable versions only |
| 16 | PG | output | Power Good open-drain output asserts low when output voltage drops below 92% of nominal |
| 17 | NC | unconnected | No internal connection |
| 18 | NC | unconnected | No internal connection |
| 19 | GND/HSINK | power_in | Regulator ground and heatsink connection point for thermal dissipation |
| 20 | GND/HSINK | power_in | Regulator ground and heatsink connection point for thermal dissipation |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20 |
| Category | Power Management (PMIC) |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
TPS76833QPWPR - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps76833qpwpr-etched.step/tps76833qpwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76833qpwpr.step/tps76833qpwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
742896d0a1cf7766, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).