component
TPS76830QD
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# TPS76830QD++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8++TPS76830QD from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Regulator ground; the datasheet gives no further electrical limit for this pin. |+| 2 | EN | input | Enable input: a TTL high shuts the regulator down, and EN must be tied to ground if the shutdown feature is not used; the high-level input threshold is 1.7 V minimum and the low-level threshold is 0.9 V maximum, with EN absolute voltage limited to -0.3 V to VI + 0.3 V. |+| 3 | IN | power_in | Input voltage: recommended range is 2.7 V to 10 V, with VIN at least VOUT + VDO (or 2.7 V, whichever is greater), and the absolute maximum input is 13.5 V. |+| 4 | IN | power_in | Input voltage (second input pin, internally tied to pin 3): recommended range is 2.7 V to 10 V, with absolute maximum input of 13.5 V. |+| 5 | OUT | power_out | Regulated output voltage; output current is rated 0 to 1.0 A, and the output requires at least 10 µF to GND with ESR between 60 mΩ and 1.5 Ω for stability. |+| 6 | OUT | power_out | Regulated output voltage (second output pin, internally tied to pin 5): output current is rated 0 to 1.0 A. |+| 7 | FB/NC | unconnected | Feedback input for the adjustable device (TPS76801, 1.2 V to 5.5 V output); for fixed-output options such as the TPS76830 this pin is no connect. |+| 8 | PG | output | Open-drain power-good output that goes low when the output falls to between 92% and 98% of its nominal value, requires an external pullup resistor, and has an absolute maximum voltage of 16.5 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `TPS76830QD`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `tps76830qd-etched.step` / `tps76830qd-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps76830qd.step` / `tps76830qd.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps768) (31 pp, sha256 `742896d0a1cf7766`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps76830qd-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "tps76830qd",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps76830qd",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps76830qd.kicad_sym",+ "tps76830qd.kicad_mod",+ "tps76830qd.glb",+ "tps76830qd.step",+ "tps76830qd.lbr",+ "docs/hero.png",+ "docs/tps76830qd-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps76830qd-hero.glb",+ "tps76830qd-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS76830QD",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps768",+ "parts": {+ "symbol": "tps76830qd.kicad_sym",+ "footprint": "tps76830qd.kicad_mod",+ "model_3d": "tps76830qd-hero.glb",+ "model_3d_plain": "tps76830qd.glb",+ "model_3d_step": "tps76830qd-etched.step",+ "model_3d_step_plain": "tps76830qd.step",+ "lbr": "tps76830qd.lbr"+ },+ "distributor_links": {+ "lcsc": "C2862124",+ "digikey": "296-2749-5-ND",+ "mouser": "595-TPS76830QD"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T22:38:55Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-2749-5-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS76830QD",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Regulator ground; the datasheet gives no further electrical limit for this pin."+ },+ {+ "number": "2",+ "name": "EN",+ "type": "input",+ "description": "Enable input: a TTL high shuts the regulator down, and EN must be tied to ground if the shutdown feature is not used; the high-level input threshold is 1.7 V minimum and the low-level threshold is 0.9 V maximum, with EN absolute voltage limited to -0.3 V to VI + 0.3 V."+ },+ {+ "number": "3",+ "name": "IN",+ "type": "power_in",+ "description": "Input voltage: recommended range is 2.7 V to 10 V, with VIN at least VOUT + VDO (or 2.7 V, whichever is greater), and the absolute maximum input is 13.5 V."+ },+ {+ "number": "4",+ "name": "IN",+ "type": "power_in",+ "description": "Input voltage (second input pin, internally tied to pin 3): recommended range is 2.7 V to 10 V, with absolute maximum input of 13.5 V."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage; output current is rated 0 to 1.0 A, and the output requires at least 10 µF to GND with ESR between 60 mΩ and 1.5 Ω for stability."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage (second output pin, internally tied to pin 5): output current is rated 0 to 1.0 A."+ },+ {+ "number": "7",+ "name": "FB/NC",+ "type": "unconnected",+ "description": "Feedback input for the adjustable device (TPS76801, 1.2 V to 5.5 V output); for fixed-output options such as the TPS76830 this pin is no connect."+ },+ {+ "number": "8",+ "name": "PG",+ "type": "output",+ "description": "Open-drain power-good output that goes low when the output falls to between 92% and 98% of its nominal value, requires an external pullup resistor, and has an absolute maximum voltage of 16.5 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbers and names come from the SOIC-8 (D) Terminal Functions table (page 4) and the D package t; Pin 7 is labeled FB/NC. The datasheet says it is no connect for fixed-output options, so it is shown; The datasheet calls PG an active-high output in one place, but the PG text describes an open-drain o"+ ],+ "pages_sent": 13,+ "cost_usd": 0.0813,+ "at": "2026-10-07T22:38:39"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps768",+ "pages": 31,+ "sha256": "742896d0a1cf7766",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps76830qd.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps76830qd-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b5ba37395e9de25309f6b3eac0218e7cd3b213940ad1ad501d0d2b744d2f9803",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}