component
TPS76801QPWPR
Public Made by Adomby adom
Texas Instruments Linear Voltage Regulators (LDO), HTSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS76801QPWPR
Texas Instruments · Linear Voltage Regulators (LDO) · HTSSOP-20
TPS76801QPWPR from Texas Instruments, in a HTSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND/HSINK | power_in | Regulator ground and heatsink pad connection. |
| 2 | GND/HSINK | power_in | Regulator ground and heatsink pad connection. |
| 3 | GND | power_in | Regulator ground connection. |
| 4 | NC | unconnected | No internal connection. |
| 5 | EN | input | Enable input; supply ≥1.7V for normal regulation or <0.9V to shut down regulator and reduce quiescent current to <1µA. |
| 6 | IN | power_in | Input voltage supply; accepts 2.7V to 10V. |
| 7 | IN | power_in | Input voltage supply; accepts 2.7V to 10V. |
| 8 | NC | unconnected | No internal connection. |
| 9 | GND/HSINK | power_in | Regulator ground and heatsink pad connection. |
| 10 | GND/HSINK | power_in | Regulator ground and heatsink pad connection. |
| 11 | GND/HSINK | power_in | Regulator ground and heatsink pad connection. |
| 12 | GND/HSINK | power_in | Regulator ground and heatsink pad connection. |
| 13 | OUT | power_out | Regulated output voltage; adjustable from 1.2V to 5.5V with maximum 1A continuous output current. |
| 14 | OUT | power_out | Regulated output voltage; adjustable from 1.2V to 5.5V with maximum 1A continuous output current. |
| 15 | FB/NC | input | Feedback input for adjustable regulator output voltage programming; 2nA input current at VFB=1.5V. |
| 16 | PG | output | Open-drain power good output; pulls low when output voltage drops below 92% of nominal value. |
| 17 | NC | unconnected | No internal connection. |
| 18 | NC | unconnected | No internal connection. |
| 19 | GND/HSINK | power_in | Regulator ground and heatsink pad connection. |
| 20 | GND/HSINK | power_in | Regulator ground and heatsink pad connection. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20 |
| Category | Power Supply Chip |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
TPS76801QPWPR - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps76801qpwpr-etched.step/tps76801qpwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76801qpwpr.step/tps76801qpwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
742896d0a1cf7766, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).