component
TPS767D318PWPR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS767D318PWPR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSSOP-28-EP
TPS767D318PWPR from Texas Instruments, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection |
| 2 | NC | unconnected | No internal connection |
| 3 | 1GND | power_in | Regulator #1 ground |
| 4 | 1EN | input | Regulator #1 enable input |
| 5 | 1IN | power_in | Regulator #1 input supply voltage, 2.7V to 10V |
| 6 | 1IN | power_in | Regulator #1 input supply voltage, 2.7V to 10V |
| 7 | NC | unconnected | No internal connection |
| 8 | NC | unconnected | No internal connection |
| 9 | 2GND | power_in | Regulator #2 ground |
| 10 | 2EN | input | Regulator #2 enable input |
| 11 | 2IN | power_in | Regulator #2 input supply voltage, 2.7V to 10V |
| 12 | 2IN | power_in | Regulator #2 input supply voltage, 2.7V to 10V |
| 13 | NC | unconnected | No internal connection |
| 14 | NC | unconnected | No internal connection |
| 15 | NC | unconnected | No internal connection |
| 16 | NC | unconnected | No internal connection |
| 17 | 2OUT | power_out | Regulator #2 output voltage, 3.3V fixed |
| 18 | 2OUT | power_out | Regulator #2 output voltage, 3.3V fixed |
| 19 | NC | unconnected | No internal connection |
| 20 | NC | unconnected | No internal connection |
| 21 | NC | unconnected | No internal connection |
| 22 | 2RESET | tri_state | Regulator #2 reset signal, open-drain output with 200ms delay |
| 23 | 1OUT | power_out | Regulator #1 output voltage, 1.8V fixed |
| 24 | 1OUT | power_out | Regulator #1 output voltage, 1.8V fixed |
| 25 | 1FB/NC | unconnected | No connection for fixed output version; feedback input for adjustable versions |
| 26 | NC | unconnected | No internal connection |
| 27 | NC | unconnected | No internal connection |
| 28 | 1RESET | tri_state | Regulator #1 reset signal, open-drain output with 200ms delay |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-28-EP |
| Category | Power Management (PMIC) |
| Pins | 29 |
CAD (KiCad official)
- Symbol:
TPS767D318PWPR - Footprint:
Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm - 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files:
tps767d318pwpr-etched.step/tps767d318pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps767d318pwpr.step/tps767d318pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
8811d08c700e185d, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).