Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS76130DBVR

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS76130DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Regulator input voltage, recommended operating range 3.35 V to 16 V for the TPS76130, with a 1 µF or larger ceramic decoupling capacitor recommended between IN and GND.
2 GND power_in Device ground; all device voltages in the datasheet are referenced to this GND pin.
3 EN input Enable input: a logic low (0.8 V maximum) shuts the regulator off and reduces supply current to less than 1 µA, a logic high (2 V minimum) enables operation, and the pin must not be left floating.
4 NC unconnected No internal connection; the datasheet states this pin is not connected inside the device.
5 OUT power_out Regulated 3 V output for the TPS76130, rated for up to 100 mA continuous, requiring an output capacitor of at least 4.7 µF with ESR between 0.1 Ω and 10 Ω connected between OUT and GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VI -0.3 16 V Voltages with respect to GND (Note 1) 2
Voltage range at EN -0.3 V 2
Operating junction temperature range TJ -40 150 °C 2
Storage temperature range Tstg -65 150 °C 2
ESD rating, HBM 1.5 kV Human body model (HBM) 2
Input voltage (TPS76130) VI 3.35 16 V TPS76130 2
Continuous output current IO 0 100 mA 2
Operating junction temperature TJ -40 125 °C 2
Output voltage VO 2.96 3 3.04 V TJ = 25°C 3
Output voltage VO 2.9 3.04 V TJ = 25°C, 1 mA < IO < 100 mA 3
Output voltage VO 2.89 3.07 V 1 mA < IO < 100 mA 3
Standby current II(standby) 1 µA EN = 0 V 3
Quiescent current (GND current) 90 115 µA IO = 0 mA, TJ = 25°C 3
Quiescent current (GND current) 130 µA IO = 0 mA 3
Quiescent current (GND current) 100 130 µA IO = 1 mA, TJ = 25°C 3
Quiescent current (GND current) 170 µA IO = 1 mA 3
Quiescent current (GND current) 190 220 µA IO = 10 mA, TJ = 25°C 3
Quiescent current (GND current) 260 µA IO = 10 mA 3
Quiescent current (GND current) 850 1100 µA IO = 50 mA, TJ = 25°C 3
Quiescent current (GND current) 1200 µA IO = 50 mA 3
Quiescent current (GND current) 2600 3600 µA IO = 100 mA, TJ = 25°C 3
Quiescent current (GND current) 4000 µA IO = 100 mA 3
Input regulation (TPS76130) 3 10 mV 4 V < VI < 16, IO = 1 mA 3
Peak output current/current limit 100 125 135 mA 4
High level enable input 2 V 4
Low level enable input 0.8 V 4
Input current (EN) II -1 0 1 µA EN = 0 V 4
Input current (EN) II 2.5 5 µA EN = VI 4
Dropout voltage VDO 1 3 mV IO = 0 mA, TJ = 25°C 4
Dropout voltage VDO 5 mV IO = 0 mA 4
Dropout voltage VDO 7 10 mV IO = 1 mA, TJ = 25°C 4
Dropout voltage VDO 15 mV IO = 1 mA 4
Dropout voltage VDO 40 60 mV IO = 10 mA, TJ = 25°C 4
Dropout voltage VDO 90 mV IO = 10 mA 4
Dropout voltage VDO 120 150 mV IO = 50 mA, TJ = 25°C 4
Dropout voltage VDO 180 mV IO = 50 mA 4
Dropout voltage VDO 170 240 mV IO = 100 mA, TJ = 25°C 4
Dropout voltage VDO 280 mV IO = 100 mA 4
Junction-to-ambian thermal resistance (Low K board) RθJA 259 °C/W Low K JEDEC (1s) board, DBV package 2
Junction-to-ambient thermal resistance (High K board) RθJA 180 °C/W High K JEDEC (2s2p) board, DBV package 2
Junction-to-case thermal resistance (Low K board) RθJC 65.8 °C/W Low K JEDEC (1s) board, DBV package 2
Junction-to-case thermal resistance (High K board) RθJC 65.8 °C/W High K JEDEC (2s2p) board, DBV package 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS76130DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps76130dbvr-etched.step / tps76130dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps76130dbvr.step / tps76130dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 361b2935a2091700, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF