main
Ray
Publish 0.1.0
254e610
TPS76030DBVR
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
TPS76030DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage for the regulator; the recommended VI range for the TPS76030 is 3.2 V to 16 V, and the absolute maximum input voltage is 16 V (-0.3 V to 16 V). |
| 2 | GND | power_in | Ground pin; all voltages on the device are referenced to this GND pin, and a capacitor of at least 2.2 µF with ESR between 0.1 Ω and 20 Ω must connect OUT to GND for stability. |
| 3 | EN | input | Enable input; a logic low (0.8 V maximum) shuts the regulator off and a logic high (2 V minimum) enables it, and the pin must not be left floating. |
| 4 | NC | unconnected | No internal connection; the pin is not connected inside the device. |
| 5 | OUT | power_out | Regulated output voltage (3 V nominal for the TPS76030), with continuous output current of 0 to 50 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage, VI (TPS76030) | VI | 3.2 | 16 | V | 2 | ||
| Continuous output current | IO | 0 | 50 | mA | 2 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 2 | ||
| Input voltage range | VI | -0.3 | 16 | V | All voltages with respect to device GND pin | 2 | |
| Voltage range at EN | -0.3 | V | Maximum printed as VI + 0.3 V (not numeric) | 2 | |||
| Operating junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| ESD rating, HBM | 1.5 | kV | Human body model | 2 | |||
| Output voltage (TPS76030) | VO | 2.96 | 3 | 3.04 | V | TJ = 25°C | 3 |
| Output voltage (TPS76030) | VO | 2.92 | 3.04 | V | TJ = 25°C, 1 mA < IO < 50 mA | 3 | |
| Output voltage (TPS76030) | VO | 2.91 | 3.07 | V | 1 mA < IO < 50 mA | 3 | |
| Standby current | II(standby) | 1 | µA | EN = 0 V | 3 | ||
| Quiescent current (GND current) | 90 | 115 | µA | IO = 0 mA, TJ = 25°C | 3 | ||
| Quiescent current (GND current) | 130 | µA | IO = 0 mA | 3 | |||
| Quiescent current (GND current) | 100 | 130 | µA | IO = 1 mA, TJ = 25°C | 3 | ||
| Quiescent current (GND current) | 170 | µA | IO = 1 mA | 3 | |||
| Quiescent current (GND current) | 190 | 215 | µA | IO = 10 mA, TJ = 25°C | 3 | ||
| Quiescent current (GND current) | 260 | µA | IO = 10 mA | 3 | |||
| Quiescent current (GND current) | 850 | 1100 | µA | IO = 50 mA, TJ = 25°C | 3 | ||
| Quiescent current (GND current) | 1200 | µA | IO = 50 mA | 3 | |||
| Input regulation (TPS76030) | 3 | 10 | mV | 4 V < VI < 16, IO = 1 mA | 3 | ||
| Dropout voltage | 1 | 3 | mV | IO = 0 mA, TJ = 25°C | 3 | ||
| Dropout voltage | 5 | mV | IO = 0 mA | 3 | |||
| Dropout voltage | 7 | 10 | mV | IO = 1 mA, TJ = 25°C | 3 | ||
| Dropout voltage | 15 | mV | IO = 1 mA | 3 | |||
| Dropout voltage | 40 | 60 | mV | IO = 10 mA, TJ = 25°C | 3 | ||
| Dropout voltage | 90 | mV | IO = 10 mA | 3 | |||
| Dropout voltage | 120 | 150 | mV | IO = 50 mA, TJ = 25°C | 3 | ||
| Dropout voltage | 180 | mV | IO = 50 mA | 3 | |||
| Peak output current / current limit | 100 | 125 | 135 | mA | 3 | ||
| High level enable input | 2 | V | 3 | ||||
| Low level enable input | 0.8 | V | 3 | ||||
| Input current (EN) | II | -1 | 0 | 1 | µA | EN = 0 V | 3 |
| Input current (EN) | II | 2.5 | 5 | µA | EN = VI | 3 | |
| Junction-to-case thermal resistance | RθJC | 65.8 | °C/W | DBV package, Low K and High K JEDEC boards | 2 | ||
| Junction-to-ambient thermal resistance | RθJA | 259 | °C/W | Low K JEDEC (1s) board, DBV package | 2 | ||
| Junction-to-ambient thermal resistance | RθJA | 180 | °C/W | High K JEDEC (2s2p) board, DBV package | 2 | ||
| Derating factor above TA = 25°C | 3.9 | mW/°C | Low K JEDEC (1s) board, DBV package | 2 | |||
| Derating factor above TA = 25°C | 5.6 | mW/°C | High K JEDEC (2s2p) board, DBV package | 2 |
CAD (KiCad official)
- Symbol:
TPS76030DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps76030dbvr-etched.step/tps76030dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76030dbvr.step/tps76030dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (17 pp, sha256
6a5a0b28ed88cb00, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS76030DBVR
**Texas Instruments** · Linear Voltage Regulators (LDO) · SOT-23-5
TPS76030DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage for the regulator; the recommended VI range for the TPS76030 is 3.2 V to 16 V, and the absolute maximum input voltage is 16 V (-0.3 V to 16 V). |
| 2 | GND | power_in | Ground pin; all voltages on the device are referenced to this GND pin, and a capacitor of at least 2.2 µF with ESR between 0.1 Ω and 20 Ω must connect OUT to GND for stability. |
| 3 | EN | input | Enable input; a logic low (0.8 V maximum) shuts the regulator off and a logic high (2 V minimum) enables it, and the pin must not be left floating. |
| 4 | NC | unconnected | No internal connection; the pin is not connected inside the device. |
| 5 | OUT | power_out | Regulated output voltage (3 V nominal for the TPS76030), with continuous output current of 0 to 50 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage, VI (TPS76030) | VI | 3.2 | | 16 | V | | 2 |
| Continuous output current | IO | 0 | | 50 | mA | | 2 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 2 |
| Input voltage range | VI | -0.3 | | 16 | V | All voltages with respect to device GND pin | 2 |
| Voltage range at EN | | -0.3 | | | V | Maximum printed as VI + 0.3 V (not numeric) | 2 |
| Operating junction temperature range | TJ | -40 | | 150 | °C | | 2 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 2 |
| ESD rating, HBM | | | | 1.5 | kV | Human body model | 2 |
| Output voltage (TPS76030) | VO | 2.96 | 3 | 3.04 | V | TJ = 25°C | 3 |
| Output voltage (TPS76030) | VO | 2.92 | | 3.04 | V | TJ = 25°C, 1 mA < IO < 50 mA | 3 |
| Output voltage (TPS76030) | VO | 2.91 | | 3.07 | V | 1 mA < IO < 50 mA | 3 |
| Standby current | II(standby) | | | 1 | µA | EN = 0 V | 3 |
| Quiescent current (GND current) | | | 90 | 115 | µA | IO = 0 mA, TJ = 25°C | 3 |
| Quiescent current (GND current) | | | | 130 | µA | IO = 0 mA | 3 |
| Quiescent current (GND current) | | | 100 | 130 | µA | IO = 1 mA, TJ = 25°C | 3 |
| Quiescent current (GND current) | | | | 170 | µA | IO = 1 mA | 3 |
| Quiescent current (GND current) | | | 190 | 215 | µA | IO = 10 mA, TJ = 25°C | 3 |
| Quiescent current (GND current) | | | | 260 | µA | IO = 10 mA | 3 |
| Quiescent current (GND current) | | | 850 | 1100 | µA | IO = 50 mA, TJ = 25°C | 3 |
| Quiescent current (GND current) | | | | 1200 | µA | IO = 50 mA | 3 |
| Input regulation (TPS76030) | | | 3 | 10 | mV | 4 V < VI < 16, IO = 1 mA | 3 |
| Dropout voltage | | | 1 | 3 | mV | IO = 0 mA, TJ = 25°C | 3 |
| Dropout voltage | | | | 5 | mV | IO = 0 mA | 3 |
| Dropout voltage | | | 7 | 10 | mV | IO = 1 mA, TJ = 25°C | 3 |
| Dropout voltage | | | | 15 | mV | IO = 1 mA | 3 |
| Dropout voltage | | | 40 | 60 | mV | IO = 10 mA, TJ = 25°C | 3 |
| Dropout voltage | | | | 90 | mV | IO = 10 mA | 3 |
| Dropout voltage | | | 120 | 150 | mV | IO = 50 mA, TJ = 25°C | 3 |
| Dropout voltage | | | | 180 | mV | IO = 50 mA | 3 |
| Peak output current / current limit | | 100 | 125 | 135 | mA | | 3 |
| High level enable input | | 2 | | | V | | 3 |
| Low level enable input | | | | 0.8 | V | | 3 |
| Input current (EN) | II | -1 | 0 | 1 | µA | EN = 0 V | 3 |
| Input current (EN) | II | | 2.5 | 5 | µA | EN = VI | 3 |
| Junction-to-case thermal resistance | RθJC | | 65.8 | | °C/W | DBV package, Low K and High K JEDEC boards | 2 |
| Junction-to-ambient thermal resistance | RθJA | | 259 | | °C/W | Low K JEDEC (1s) board, DBV package | 2 |
| Junction-to-ambient thermal resistance | RθJA | | 180 | | °C/W | High K JEDEC (2s2p) board, DBV package | 2 |
| Derating factor above TA = 25°C | | | 3.9 | | mW/°C | Low K JEDEC (1s) board, DBV package | 2 |
| Derating factor above TA = 25°C | | | 5.6 | | mW/°C | High K JEDEC (2s2p) board, DBV package | 2 |
## CAD (KiCad official)
- Symbol: `TPS76030DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tps76030dbvr-etched.step` / `tps76030dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps76030dbvr.step` / `tps76030dbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps76030.pdf) (17 pp, sha256 `6a5a0b28ed88cb00`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps76030dbvr-datasheet.pdf)