TPS75100DSKR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps75100dskr",
  "title": "TPS75100DSKR",
  "brief": "Texas Instruments LED Drivers, DFN-10-EP(2.5x2.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "tps75100dskr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS75100DSKR",
    "manufacturer": "Texas Instruments",
    "package": "DFN-10-EP(2.5x2.5)",
    "pin_count": 11,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/ds/symlink/tps75100.pdf",
    "parts": {
      "symbol": "tps75100dskr.kicad_sym",
      "footprint": "tps75100dskr.kicad_mod",
      "model_3d": "tps75100dskr-etched.glb",
      "model_3d_plain": "tps75100dskr.glb",
      "model_3d_step": "tps75100dskr-etched.step",
      "model_3d_step_plain": "tps75100dskr.step",
      "lbr": "tps75100dskr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2678691",
      "digikey": "296-50161-2-ND",
      "mouser": "595-TPS75100DSKR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T18:42:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-50161-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS75100DSKR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ENB",
        "type": "input",
        "description": "Enable pin for Bank B: high turns on the Bank B current source, low turns it off, a PWM signal reduces LED current between 0 mA and the ISET maximum, and it can be left open or tied to GND if unused."
      },
      {
        "number": "2",
        "name": "ENA",
        "type": "input",
        "description": "Enable pin for Bank A: high turns on the Bank A current source, low turns it off, a PWM signal reduces LED current between 0 mA and the ISET maximum, and it can be left open or tied to GND if unused."
      },
      {
        "number": "3",
        "name": "D1A",
        "type": "output",
        "description": "Diode source current output for Bank A, connected to the LED anode."
      },
      {
        "number": "4",
        "name": "D2A",
        "type": "output",
        "description": "Diode source current output for Bank A, connected to the LED anode."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, which is also connected to the exposed thermal pad."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "Not internally connected."
      },
      {
        "number": "7",
        "name": "D2B",
        "type": "output",
        "description": "Diode source current output for Bank B, connected to the LED anode."
      },
      {
        "number": "8",
        "name": "D1B",
        "type": "output",
        "description": "Diode source current output for Bank B, connected to the LED anode."
      },
      {
        "number": "9",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input, with a recommended operating range of 2.7 V to 5.5 V and an absolute maximum of 7 V."
      },
      {
        "number": "10",
        "name": "ISET",
        "type": "input",
        "description": "An optional resistor to GND sets the maximum LED current, and if no resistor is connected it defaults to the internally programmed value."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed thermal pad, connected to ground (listed as 'Pad' together with pin 5)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 9,
        "cost_usd": 0.128,
        "at": "2026-10-01T18:42:08"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/ds/symlink/tps75100.pdf",
        "pages": 28,
        "sha256": "13a2ff9b7702b469",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "DFN-10-EP(2.5x2.5)",
      "Category": "LED Drivers",
      "Pins": "11"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps75100dskr"
  ],
  "discovery_pitch": "TPS75100DSKR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps75100dskr.kicad_sym",
    "tps75100dskr.kicad_mod",
    "tps75100dskr.glb",
    "tps75100dskr.step",
    "tps75100dskr.lbr",
    "docs/hero.png",
    "docs/tps75100dskr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}