main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps74633pcqwdrvrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps74633pcqwdrvrq1: viewers · Ray
package.json tps74633pcqwdrvrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps74633pcqwdrvrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps74633pcqwdrvrq1 · Ray
tps74633pcqwdrvrq1-etched.fit.json tps74633pcqwdrvrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps74633pcqwdrvrq1-etched.glb tps74633pcqwdrvrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps74633pcqwdrvrq1-etched.step tps74633pcqwdrvrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps74633pcqwdrvrq1.glb Publish 0.1.0 · Ray
tps74633pcqwdrvrq1.kicad_mod Publish 0.1.0 · Ray
tps74633pcqwdrvrq1.kicad_sym Publish 0.1.0 · Ray
tps74633pcqwdrvrq1.lbr Publish 0.1.0 · Ray
tps74633pcqwdrvrq1.step Publish 0.1.0 · Ray

TPS74633PCQWDRVRQ1

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)

TPS74633PCQWDRVRQ1 from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulated output voltage pin requiring an output capacitor from OUT to ground for stability.
2 NC unconnected No internal connection; ground this pin for better thermal performance.
3 GND power_in Ground pin.
4 EN input Enable input pin; drive above VEN(HI) to enable regulator operation, drive below VEN(LO) to disable and enter shutdown mode.
5 PG output Power-good output monitoring feedback voltage status; available in open-drain and push-pull topologies with pullup resistor required for open-drain version.
6 IN power_in Input supply pin requiring ceramic input capacitor for best transient response and minimum input impedance.
7 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6-EP(2x2)
Category Power Management (PMIC)
Pins 7

CAD (KiCad official)

  • Symbol: TPS74633PCQWDRVRQ1
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps74633pcqwdrvrq1-etched.step / tps74633pcqwdrvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps74633pcqwdrvrq1.step / tps74633pcqwdrvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 184c3108e6b0527b, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF