component
TPS74615PQWDRBRQ1
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS74615PQWDRBRQ1
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SON-8-EP(3x3)
TPS74615PQWDRBRQ1 from Texas Instruments, in a SON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin requiring a capacitor to ground for stability; place output capacitor as close to device as possible. |
| 2 | NC | unconnected | No internal connection; ground this pin for better thermal performance. |
| 3 | NC | unconnected | No internal connection; ground this pin for better thermal performance. |
| 4 | GND | power_in | Ground pin. |
| 5 | EN | input | Enable pin; drive EN greater than VEN(HI) to turn on the regulator, or less than VEN(LO) to enter shutdown mode. |
| 6 | PG | output | Power-good output (open-drain topology, 150-µs delay); a pullup resistor is required when used. |
| 7 | NC | unconnected | No internal connection; ground this pin for better thermal performance. |
| 8 | IN | power_in | Input supply pin; use recommended ceramic capacitor from IN to ground placed close to device for best transient response. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SON-8-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS74615PQWDRBRQ1 - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: SON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps74615pqwdrbrq1-etched.step/tps74615pqwdrbrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps74615pqwdrbrq1.step/tps74615pqwdrbrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
184c3108e6b0527b, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).