Generated by kicad-footprint-generator · KiCad file format 20260206
TPS74401RGWT
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VQFN-20-EP(5x5)
TPS74401RGWT from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage. |
| 2 | NC | unconnected | No connection, can be left floating or connected to GND. |
| 3 | NC | unconnected | No connection, can be left floating or connected to GND. |
| 4 | NC | unconnected | No connection, can be left floating or connected to GND. |
| 5 | IN | power_in | Unregulated input to the device, 1µF or greater input capacitor recommended. |
| 6 | IN | power_in | Unregulated input to the device, 1µF or greater input capacitor recommended. |
| 7 | IN | power_in | Unregulated input to the device, 1µF or greater input capacitor recommended. |
| 8 | IN | power_in | Unregulated input to the device, 1µF or greater input capacitor recommended. |
| 9 | PG | output | Power-good open-drain active-high output indicating VOUT status, use 10kΩ to 1MΩ pullup resistor. |
| 10 | BIAS | power_in | Bias input voltage for error amplifier and control circuits, 1µF or larger capacitor recommended. |
| 11 | EN | input | Enable pin active high, high enables regulator and low disables, must not be left floating. |
| 12 | GND | power_in | Ground reference. |
| 13 | NC | unconnected | No connection, can be left floating or connected to GND. |
| 14 | NC | unconnected | No connection, can be left floating or connected to GND. |
| 15 | SS | passive | Soft-start pin with external capacitor to set ramp time, floating gives 100µs typical. |
| 16 | FB | input | Feedback connection to external resistor divider network that sets output voltage, must not be left floating. |
| 17 | NC | unconnected | No connection, can be left floating or connected to GND. |
| 18 | OUT | power_out | Regulated output voltage. |
| 19 | OUT | power_out | Regulated output voltage. |
| 20 | OUT | power_out | Regulated output voltage. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20-EP(5x5) |
| Category | Power Management (PMIC) |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN, VBIAS) | VIN, VBIAS | -0.3 | 6 | V | 4 | ||
| Enable voltage | VEN | -0.3 | 6 | V | 4 | ||
| Power good voltage | VPG | -0.3 | 6 | V | 4 | ||
| PG sink current | IPG | 0 | 1.5 | mA | 4 | ||
| Soft-start voltage | VSS | -0.3 | 6 | V | 4 | ||
| Feedback voltage | VFB | -0.3 | 6 | V | 4 | ||
| Output voltage (max VIN + 0.3 V) | VOUT | -0.3 | V | 4 | |||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Input supply voltage (min VOUT + VDO(VIN)) | VIN | 5.5 | V | 4 | |||
| Enable supply voltage | VEN | 5.5 | V | 4 | |||
| BIAS supply voltage (min VOUT + VDO(VBIAS), see footnote) | VBIAS | 5.5 | V | 4 | |||
| Output voltage | VOUT | 0.8 | 3.6 | V | 4 | ||
| Output current | IOUT | 0 | 3 | A | 4 | ||
| Output capacitor (legacy chip) | COUT | 0 | µF | legacy chip | 4 | ||
| Output capacitor (new chip) | COUT | 2.2 | µF | new chip | 4 | ||
| Input capacitor | CIN | 1 | µF | 4 | |||
| Bias capacitor | CBIAS | 0.1 | 1 | µF | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Input voltage range | VIN | 5.5 | V | 5 | |||
| BIAS pin voltage range | VBIAS | 2.375 | 5.25 | V | 5 | ||
| Internal reference (adjustable) | VREF | 0.796 | 0.8 | 0.804 | V | TA = +25°C | 5 |
| Output voltage range | VOUT | 3.6 | V | VIN = 5V, IOUT = 1.5A, VBIAS = 5V | 5 | ||
| VOUT accuracy (legacy chip) | VOUT | -1 | 0.2 | 1 | % | 2.97V ≤ VBIAS ≤ 5.25V, VOUT + 1.62V ≤ VBIAS, 50mA ≤ IOUT ≤ 3.0A (legacy chip) | 5 |
| VOUT accuracy (VQFN, footnote 2) | VOUT | -1 | 0.2 | 1 | % | VOUT + VDO BIAS ≤ VBIAS ≤ 5.25 V, 100 mA ≤ IOUT ≤ I VDO BIAS, VQFN(2) | 5 |
| VOUT accuracy (new chip) | VOUT | -1 | 0.3 | 1 | % | 2.97V ≤ VBIAS ≤ 5.25V, VOUT + 1.62V ≤ VBIAS, 50mA ≤ IOUT ≤ 3.0A (new chip) | 5 |
| Line regulation (VQFN, legacy chip) | ΔVOUT(ΔVIN) | 0.0005 | 0.05 | %/V | VOUT(nom) + 0.3 ≤ VIN ≤ 5.5V VQFN (legacy chip) | 5 | |
| Line regulation (new chip) | ΔVOUT(ΔVIN) | 0.001 | 0.05 | %/V | VOUT(nom) + 0.3 ≤ VIN ≤ 5.5V (new chip) | 5 | |
| VIN dropout voltage (VQFN, legacy chip) | VDO | 115 | 195 | mV | IOUT = 3A, VBIAS – VOUT(nom) ≥ 1.62V, VQFN (legacy chip) | 6 | |
| VIN dropout voltage (new chip) | VDO | 120 | 200 | mV | IOUT = 3 A, VBIAS – VOUT(nom) ≥ 1.62V, VQFN (new chip) | 6 | |
| Current limit (VQFN, legacy chip) | ICL | 3.8 | 6 | A | VOUT = 80% × VOUT(nom), VQFN (legacy chip) | 6 | |
| Current limit (new chip) | ICL | 3.9 | 5.5 | A | VOUT = 80% × VOUT(nom) (new chip) | 6 | |
| BIAS pin current | IBIAS | 2 | 4 | mA | IOUT = 0mA to 3.0 A | 6 | |
| Shutdown supply current (IGND) | ISHDN | 1 | 100 | µA | VEN ≤ 0.4V | 6 | |
| Feedback pin current | IFB | -250 | 95 | 250 | nA | IOUT = 50mA to 3A | 6 |
| Soft-start charging current (legacy chip) | ISS | 500 | 730 | 1000 | nA | VSS = 0.4V, IOUT = 0mA (legacy chip) | 7 |
| Soft-start charging current (new chip) | ISS | 300 | 530 | 800 | nA | VSS = 0.4V, IOUT = 0mA (new chip) | 7 |
| Enable input high level | VEN(hi) | 1.1 | 5.5 | V | 7 | ||
| Enable input low level | VEN(lo) | 0 | 0.4 | V | 7 | ||
| Enable pin current | IEN | 0.1 | 1 | µA | VEN = 5V | 7 | |
| PG trip threshold (legacy chip) | VIT | 86.5 | 90 | 93.5 | %VOUT | VOUT decreasing (legacy chip) | 7 |
| PG trip threshold (new chip) | VIT | 85 | 90 | 94 | %VOUT | VOUT decreasing (new chip) | 7 |
| PG output low voltage | VPG(lo) | 0.3 | V | IPG = 1mA (sinking), VOUT < VIT | 7 | ||
| PG leakage current | IPG(lkg) | 0.03 | 1 | µA | VPG = 5.25V, VOUT > VIT | 7 | |
| Junction-to-ambient thermal resistance (RGW, column 1) | RθJA | 35.4 | °C/W | 5 | |||
| Junction-to-ambient thermal resistance (RGW, column 2) | RθJA | 34.7 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (RGW, column 1) | RθJC(top) | 32.4 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (RGW, column 2) | RθJC(top) | 31 | °C/W | 5 | |||
| Junction-to-board thermal resistance (RGW, column 1) | RθJB | 14.7 | °C/W | 5 | |||
| Junction-to-board thermal resistance (RGW, column 2) | RθJB | 13.5 | °C/W | 5 | |||
| Junction-to-top characterization parameter (RGW, column 1) | ψJT | 0.4 | °C/W | 5 | |||
| Junction-to-top characterization parameter (RGW, column 2) | ψJT | 1.4 | °C/W | 5 | |||
| Junction-to-board characterization parameter (RGW, column 1) | ψJB | 14.8 | °C/W | 5 | |||
| Junction-to-board characterization parameter (RGW, column 2) | ψJB | 13.5 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance (RGW, column 1) | RθJC(bot) | 3.9 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance (RGW, column 2) | RθJC(bot) | 3.6 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TPS74401RGWT - Footprint:
Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm - 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
tps74401rgwt-etched.step/tps74401rgwt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps74401rgwt.step/tps74401rgwt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
1e27517f33e62170, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).