main
Ray Publish 0.1.0 2528c92
{
  "slug": "tps74201rgrr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Linear Voltage Regulators (LDO), VQFN-20-EP(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tps74201rgrr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps74201rgrr.kicad_sym",
    "tps74201rgrr.kicad_mod",
    "tps74201rgrr.glb",
    "tps74201rgrr.step",
    "tps74201rgrr.lbr",
    "docs/hero.png",
    "docs/tps74201rgrr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps74201rgrr-hero.glb",
    "tps74201rgrr-hero.overlay.json",
    "tps74201rgrr-etched.glb"
  ],
  "component": {
    "mpn": "TPS74201RGRR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-20-EP(3.5x3.5)",
    "pin_count": 21,
    "category": "Power Supply Chip",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps74201rgrr.pdf",
    "parts": {
      "symbol": "tps74201rgrr.kicad_sym",
      "footprint": "tps74201rgrr.kicad_mod",
      "model_3d": "tps74201rgrr-hero.glb",
      "model_3d_plain": "tps74201rgrr-etched.glb",
      "model_3d_step": "tps74201rgrr-etched.step",
      "model_3d_step_plain": "tps74201rgrr.step",
      "lbr": "tps74201rgrr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2867231",
      "digikey": "296-52086-2-ND",
      "mouser": "595-TPS74201RGRR"
    },
    "distributor_check": {
      "checked_at": "2026-10-26T18:53:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-52086-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS74201RGRR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage; no capacitor is required on this pin for stability."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; can be left floating or connected to GND for better thermal contact to the top-side plane."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; can be left floating or connected to GND for better thermal contact to the top-side plane."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; can be left floating or connected to GND for better thermal contact to the top-side plane."
      },
      {
        "number": "5",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input to the device."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input to the device."
      },
      {
        "number": "7",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input to the device."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input to the device."
      },
      {
        "number": "9",
        "name": "PG",
        "type": "output",
        "description": "Open-drain active-high power-good output that goes high-impedance when VOUT exceeds the PG trip threshold; use a 10 kΩ to 1 MΩ pullup to a supply up to 5.5 V, or leave floating if unused."
      },
      {
        "number": "10",
        "name": "BIAS",
        "type": "power_in",
        "description": "Bias input voltage for the error amplifier, reference, and internal control circuits."
      },
      {
        "number": "11",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: high enables the regulator, low puts it into shutdown; must not be left floating."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; can be left floating or connected to GND for better thermal contact to the top-side plane."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; can be left floating or connected to GND for better thermal contact to the top-side plane."
      },
      {
        "number": "15",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin; a capacitor to ground sets the start-up time, and if left floating the soft-start ramp time is typically 100 μs."
      },
      {
        "number": "16",
        "name": "FB",
        "type": "input",
        "description": "Feedback connection to the center tap of the external resistor divider that sets the output voltage; must not be left floating (adjustable version)."
      },
      {
        "number": "17",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; can be left floating or connected to GND for better thermal contact to the top-side plane."
      },
      {
        "number": "18",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage; no capacitor is required on this pin for stability."
      },
      {
        "number": "19",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage; no capacitor is required on this pin for stability."
      },
      {
        "number": "20",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage; no capacitor is required on this pin for stability."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table gives the exposed pad only as 'PAD/TAB' with no pin number and no stated ele; The datasheet gives no I/O type for SS (shown as '—'). It is typed passive because it takes an exter; The pin table lists FB/SNS as one pin. For TPS74201 (adjustable) it is FB, so SNS (fixed versions on"
        ],
        "pages_sent": 9,
        "cost_usd": 0.1052,
        "at": "2026-10-26T18:52:54"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps74201rgrr.pdf",
        "pages": 40,
        "sha256": "3d8c3c0b3be915cc",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps74201rgrr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          3.52,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1a1a1bfe866e8f49b08fc5a2d7cbdb91e631de95873e07b585c1128ad08ef39e",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps74201rgrr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          3.52,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "46c576d5a75e685604e82fbb3dbaa91f6af644e58f2ef06dc55ae263899ae15c",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}