Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS74001DGKT

Texas Instruments · Linear Voltage Regulators (LDO) · VSSOP-8

TPS74001DGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 FB input Feedback pin for the adjustable output version only; it connects to the center tap of an external resistor divider that sets the output voltage and must not be left floating.
2 BIAS power_in Bias input voltage for the error amplifier, reference and internal control circuits, specified at 2.9 V to 6.0 V in the features list (3.0 V to 6.0 V for proper operation in the description).
3 IN power_in Input to the device, with an input voltage range of 1.2 V to 6.0 V.
4 OUT power_out Regulated output voltage that needs a small capacitor of at least 2.2 µF total typical ceramic capacitance from this pin to ground to assure stability.
5 GND power_in Ground pin (the datasheet lists pins 5 through 8 together as GND).
6 GND power_in Ground pin (the datasheet lists pins 5 through 8 together as GND).
7 GND power_in Ground pin (the datasheet lists pins 5 through 8 together as GND).
8 GND power_in Ground pin (the datasheet lists pins 5 through 8 together as GND).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Power Management ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 1.2 6 V 4
Bias pin voltage range VBIAS 2.9 6 V 4
VOUT accuracy VOUT -1 1 % TJ = 25°C 4
VOUT accuracy VOUT -2 2 % TJ = -40°C to +125°C 4
Line regulation VOUT/VIN -0.1 0.01 0.1 %/V VIN = VOUT + 1 V to 6.0 V 4
Load regulation VOUT/IOUT 1.5 % ILOAD = 0 mA to 1.5 A 4
VIN dropout voltage 100 300 mV ILOAD = 1.5 A 4
VBIAS dropout voltage VDO 1.3 1.6 V ILOAD = 1.5 A, VIN = VBIAS 4
Ground pin current IGND 2 3 mA ILOAD = 1.5 A 4
Bias pin current IBIAS 2 mA ILOAD = 1.5 A 4
Current limit ICL 1.6 6 A VOUT = 80% × VOUT (NOM) 4
Enable input high level VEN, HI 1.1 6 V 4
Enable input low level VEN, LO 0 0.4 V RLOAD = 1 kΩ to GND 4
Enable pin current IEN 0.1 1 μA VEN = 1.5 V 4
Operating junction temperature TJ -40 125 °C 4
Thermal shutdown temperature TSD 165 °C Shutdown, temperature increasing 4
Thermal shutdown temperature TSD 140 °C Reset, temperature decreasing 4
Reference voltage VREF 0.882 0.9 0.918 V 4
Input pin voltage (IN, BIAS) -0.3 6.5 V Over operating free-air temperature range 2
Voltage (EN, FB, OUT) -0.3 V Over operating free-air temperature range; max is VBIAS + 0.3 V (or +6.0 V, whichever is smaller) 2
ESD rating, human body model 2 kV HBM, JESD22-A114A 2
ESD rating, charged device model 500 V CDM, JESD22-C101B.01 2
Junction-to-ambient thermal resistance θJA 136.9 °C/W DGK (8-pin) package 3
Junction-to-case (top) thermal resistance θJCtop 35.3 °C/W DGK (8-pin) package 3
Junction-to-board thermal resistance θJB 68 °C/W DGK (8-pin) package 3
Junction-to-top characterization parameter ψJT 0.9 °C/W DGK (8-pin) package 3
Junction-to-board characterization parameter ψJB 67.8 °C/W DGK (8-pin) package 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS74001DGKT
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps74001dgkt-etched.step / tps74001dgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps74001dgkt.step / tps74001dgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 ed37adf4d937b6d9, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF