TPS73801DCQR

@@ -53,13 +53,13 @@         "number": "1",         "name": "IN",         "type": "power_in",-        "description": "Power supply input; withstands reverse voltages up to \u00b120 V; 1-10 \u00b5F bypass capacitor recommended if more than six inches from main input filter."+        "description": "Power supply input; withstands reverse voltages up to ±20 V; 1-10 µF bypass capacitor recommended if more than six inches from main input filter."       },       {         "number": "2",         "name": "OUT",         "type": "power_out",-        "description": "Regulated power output (1.21 V to 20 V); minimum 10 \u00b5F ceramic output capacitor required to prevent oscillations."+        "description": "Regulated power output (1.21 V to 20 V); minimum 10 µF ceramic output capacitor required to prevent oscillations."       },       {         "number": "3",@@ -71,13 +71,13 @@         "number": "4",         "name": "FB",         "type": "input",-        "description": "Feedback input to error amplifier; internally clamped to \u00b17 V with 3 \u03bcA bias current flowing into pin; maintains 1.21 V reference voltage for 1.21-20 V output range."+        "description": "Feedback input to error amplifier; internally clamped to ±7 V with 3 μA bias current flowing into pin; maintains 1.21 V reference voltage for 1.21-20 V output range."       },       {         "number": "5",         "name": "EN",         "type": "input",-        "description": "Enable control input; pulling low puts device in low-power shutdown state; can be driven by 5-V logic or open-collector gate with typical current 3 \u03bcA; must be tied to IN pin if unused."+        "description": "Enable control input; pulling low puts device in low-power shutdown state; can be driven by 5-V logic or open-collector gate with typical current 3 μA; must be tied to IN pin if unused."       },       {         "number": "6",@@ -118,6 +118,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps73801dcqr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.475,+          6.7,+          1.6+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "bf43e0f52215e5c8b069c660d1a580928edb1037d7f7155d98bb6d1df79e64ff",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps73801dcqr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.475,+          6.7,+          1.6+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "cb1ec83e78454b8589c441e51206199db6bcdbec96dabd1b2bc74e9375a79631",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}